After installation, I can't find the execution time

Similar Questions

• Screw is missing after service and can't find the right display driver

  Last week, I complained about the weakness of the MIC and I sent mobile care Toshiba in Adelaide. Yesterday, they sent it.

  Problem:

  I checked the laptop carefully and discovered there is a missing screw near the wireless switch. (The type of screws must be F6.5). Pourriez-Toshiba sent me that screw so that I can put that back on?

  problem 2:

  The problem, my laptop had last week was low level of the microphone. I adjusted the level of the microphone to 100% and 0% boost, I can't do something the mic flag shouting at the mic.
  Yesterday when I check the den report, he said "his updated and adjusted video drivers mic boost, replaced mic, update bios, past all the diagnostics unit.

  It worked well when I checked. But for some reason, I need to re - install the laptop. After I reinstalled the system, the same old problem came once again! Then I updated the bios, audio drivers. According to the report, I should update the video driver too. I went to mytoshiba.com.au, in the download page of windows 7 for the P500, I couldn't find the video driver for my laptop. Mine is "NVIDIA GeForce GT230M version = 8, 15, 11-8642". The driver on the web page is '8.634.1 - 090729 a - 086065C - Toshiba AMD display driver.

  I even downloaded and tried to install the video driver. After the extraction is completed, I checked the basic information from this computer. The bios and audio drivers are updated, but the video driver is always the same and low mic level problem is still the same.

  Last week I called twice the phone supports, more than an hour of waiting, spent a lot of time on the forum, made a very ugly box and sent the laptop to the mobile Center, my laptop has been opened and changed the part and sent to me. After all this, I still have the same laptop with the same problem and now missing a screw!

  I appreciate the work that technicians did. They did fix the problem. But I don't want to send the phone to them each time after I re - install the system. So please tell me how to solve this problem.

  Hi sayhi80,

  I doubt that Toshiba you can send this screw but you must contact the service provider allowed again. I'm pretty sure they can send you the missing screws and you can install it yourself. This should take only a few seconds.

  Regarding your question on the display driver: what graphics card you have exactly? If you have an nVidia card, you can install the t AMD display driver.
  In addition, it would be interesting to know what laptop you have exactly. Maybe you can post the exact model number.

  Normally all the drivers are placed on the page of Toshiba

• DeskJet 970 cxi - lost installation CD can not find the download of the software

  I have a HP DeskJet 970 cxi. I had to reinstall Windows on my computer so I lost my connection to the printer. The operating system is Windows Vista 64 bit. It is connected with a cable of parallal. I went of drivers and software, downloads, but downloading the software is not there. Does anyone have any idea were I can find the software download?

  You don't need special software.  Printer drivers are integrated into Vista.  Make sure that your Vista is updated (do Windows Update again and again until there is no more).  After that's done, plug your printer and it should recognize it.

  Read more here.

• Linux installation - I can not find the installation script

  I'm trying to follow the LabVIEW for Linux installation guide, but I have a problem. This post will be long, as I will try to tell you what I've done so far. I am also kind again on Linux, so I don't know there are a lot of things I don't know.

  I try to use http://www.ni.com/pdf/manuals/374718a.html#installing

  and http://www.ni.com/pdf/manuals/375845d.pdf

  First step of the guide is to insert the installation media "' and run

  # sh. / INSTALL

  and it's pretty easy. Or at least it would be if I had no idea where that sh file is. I requested a copy of the installation discs for my University (I install on one of their computers), and they said that while they do not have any what Linux install disks, they were pretty sure "it's here somewhere," whatever that means. This seems to be the extent of their knowledge about linux.

  On this disc is a folder named slcp10 with the content slcp10.cab, slcp10.mis, and slcp200_mft.cab, which are all of the files of windows and as far as I can tell cannot be run under linux, unless I'm using WINE, which is clearly not the way to go.

  I have also some ISOs from the Department of licensing website, but also, no one seems to know anything about installing Linux. After you mount the ISOs, I see that they contain records Bin, Common, Distributions, licenses and Readme (which is full of all kinds of trivial things). They also contain the files academicsitelicense.html, asladminresource.html, autorun.exe, autorun.inf, nisuite.xml, patents.txt, readme_core.html, setup.ede and suite_md5_1.xml, which none do look promising. Again, I know only how to install .exe files using WINE.

  I have since then turned to the internet to try and download directly from OR and went to http://www.ni.com/download-labview/ and selected ' already own LabVIEW? Download the latest version. From there on, I select the drop-down list for alternative OS and select MAC OS x I read somewhere on the help pages OR that it would work on a linux machine (which seems logical, that the MAC is UNIX-based, right?). Well, it gives me a file dmg (apparently some sort of file mac?) I found a way to use Linux by extracting in 7zip and then ride the hfs file. It always seems to be some sort of evaluation program because it contains LabVIEW2014Evaluation.pkg, readme.html (which takes me to the installation of OSX readme-useless), installation_guide.pdf (again, only for MAC and useless for me), drivers.webloc and Extras files and licenses.

  I'm at the end of the roll, man. I feel that I'm taking crazy pills. I've never had so many badly installed a program before in my life, because technically I haven't yet started the process of installing again, and I'm already about to defenestrate from my computer. Please help me. I don't know what else to do, and I don't know there is a very simple solution that I am too ignorant to see.

  Our lab run us windows, and cake installation. After learning Linux over the last months, I never thought I would say this, but in fact, I would like to have a machine windows right now.

  Well, I managed to get installed it, but only because I found another ISO of site licensing department which had linux install files. Curiously, this unique ISO is a bit 3 GB while there are three other ISOs each come at least 7.5 GB. Are there really that many missing packages on Linux?

  Sorry if someone reads this has similar problems, but the best I can do is tell find Linux installation disc.

• BlackBerry smartphones, I can't find the icon of e-mail account on my bb torch 9800

  Hi I just got the phone and when I open the installer I can't find the icon accouint email, its makes me crazy cos that's why I had the phone in any case

  When you say that you do not find the "e-mail account" icon do you mean the installation wizard?

  Do you have a Blackberry data Plan rather than just a normal data plan?

• I can't find the exe file to install manually.

  My drive does not load ready for installation, I can't find the exe file to install manually. can anyone help please.  Thank you very much.

  Download Photoshop Elements products | 10, 11, 12, 13

• where can I find the installation after that I bought

  where can I find the installation after that I bought

  Hi James Bennington,

  There is no need to install anything.

  You can just connect to "https://cloud.acrobat.com/convertpdf" using your Adobe ID credentials and try to create PDF or combing different files into a single PDF file.

  Kind regards

  Ana Maria

• I've recently updated to 13.6, I would uninstall and reinstall 13.1. How can I find the installer of 13.1?

  I've recently updated to 13.6, I would uninstall and reinstall 13.1. How can I find the installer of 13.1?

  Hello

  You must install after effects CC 2014.

  You can install it from the creative Cloud desktop application.

  Please visit the sites:

  Install an earlier version of any creative cloud application

  Kind regards

  Ilyes

• I replaced my pc after loss, how can I disable the old installation and reinstall on the new pc

  I replaced my pc after loss, how can I disable the old installation and reinstall on the new pc

  Hello

  You can download the 5 Lightroom from the links provided by Ned and then serialize it by serial number.

  Quickly find your serial number

  If still it asks you to disable, please contact customer service

  
  

  Kind regards

  Sheena

• Software DB can not find the installation 11r2 on Win2008r2 grid

  Hello
  
  
  I try to install RAC DB on a single node on:
  Win2008 R2
  Ora11g R2
  
  After successful grid install (as admin) I run the installation of the DB software and it says: INS-35354.
  OracleASMService + ASM, OracleOHService, OracleOraCrs11g_home2TNSListener services: are started!
  The path of the cmd is set: PATH=c:\app\administrator\product\11.2.0\grid\bin
  
  but he says - it can not find the grid software!
  
  I tried to restart the machine with nothing doesn't. I uninstalled it and installed again in 2nd directory different but still useless.
  
  What is special measures should be taken to prepare the system? (however successfully passes test grid installation phase).
  I use http://download.oracle.com/docs/cd/E11882_01/install.112/e18069/toc.htm
  
  Published by: g777 on 2011-01-11 11:22

  Salvation;

  "" I belive you can get a faster response on Forum home ' Grid Computing ' RAC, ASM & Clusterware Installation part forum

  Respect of
  HELIOS

• After Update 9.2, I can't find the setting of music library to iCloud.

  After Update 9.2 that I can't find the setting to turn on iCloud music library, besides I can't position to turn on the Apple music either.

  If I went blind or where these settings removed?  I don't know why they would have been removed but I did look through everything in settings and can not find them. It drives me crazy. It existed before the update. I want to just turn it on so I can access my music to iCloud.

  Does anyone know where the setting is?  Yes, I rebooted several times already.

  What do you see when you go into the app music?

• I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  When you import the and with what application?

  If you use the new pictures check box in the import window, as shown in this screenshot:

  

  If you're still using iPhoto then is that you say not to remove from the iPhone until you start the import process.  This window will open so you can choose whether or not to remove it from the iPhone:

  

  Finally, if you use Capture picture to import your photos the box will be in the lower left corner of the window:

  

  

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• Vision project of OR can not find the model after migrating to labview.

  Hello
  My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.