After installing AdBlock Plus, I can't leave Firefox without force quitting smoking - help!

Similar Questions

• Adblock Plus does not load in firefox 11 and Vista user limit

  I am running Windows Vista, fully patched. I downloaded Adblock Plus as an administrator, but not as a limited user. The menu bar does not work as a limited user, but the Firefox button.

  I used the download from the Mozilla website button, so I don't know which version of Firefox 11 I had. The problem has been resolved. It seems that the upgrade from 3.6 to 11 was a little more Firefox could deal smoothly. I use Norton 360 and waited until the toolbar become compatible with Firefox (that Symantec says he did to version 8) before the upgrade.

  I've improved by being logged on as administrator, and then configure Firefox as I wanted including the add-on Adblock Plus. I disconnected then connected as a limited user. At this point, the menu bar has failed, bookmarking did not work and did not all trying them to install Adblock Plus. After closing Firefox and re-opening a couple of times (as well as using IE9 to see if this browser had problems too - he didn't) Adblock has finished loading and the menu bar has started working. It seems that something in the process of installing just did not finish first. Everything seems fine now.

• recently installed xp pro but can't find driver for usb controller any help please model nx6325

  recently installed xp pro but can't find driver for usb controller any help please model nx6325

  Welcome to the HP Forum!

  edgeville wrote:

  recently installed xp pro but can't find driver for usb controller any help please model nx6325

  All the Windows drivers for your laptop are on Portal support business web users for your laptop HP. In the drop-down list, select Windows XP. It's an operating system supported so reinstall drivers.

  Check the Basic Input/Output System (BIOS) for Legacy USB Support. To do this, follow the procedures below:

  1. Restart the computer.

• Quit Safari is grayed out suddenly in menu - can't leave Safari except to quit Activity monitor

  Safari 9.0.2 Mac OS X El Capitan 10.11.2

  Quit suddenly started Safari appear grayed out in the menu on my iMac mid-2011 tonight. The only way I can leave Safari is to force quit the application in the activity monitor. Right click on the Safari icon in the dock and selecting exit does not work. This problem showed up today. Also this morning a new user of comments that I've created suddenly appeared on my screen, connection when I logged on my Mac. Previously I had disabled guest user. No one else has access to my computer. I have disabled guest user on my Mac again after that I logged. And then tonight, options to quit Safari have suddenly been disabled. Any ideas or suggestions?

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis

• Revel app installed on ipad mini can I remove it without losing the photos

  Revel app installed on the ipad mini - can I remove it without losing the photos?

  Revel includes storage of ipad.

  If I delete the app delete my pictures

  Or

  Can I connect to revel through safari and they will still be there?

  Remove the application of the ipad will not remove your photos from the cloud of Revel. You can certainly connect from a web browser to view and share your photos, download, download, etc.

  Guinot

• Catalog file's not leaving - have to force quit always

  My main lightroom catalog won't leave - I still have to do a force quit (Lightroom does not message in Mac OSX)

  Unfortunately, all my backups in this catalogue have this same problem. I should have got on this more early because it lasts a few months and I've just packaged with it.

  I tried to reinstall lightroom, optimize the catalog ect but still the same problem. It doesn't happen in this catalogue, I can open and close Lightroom without any problem using other catalogues.

  Someone at - it strategies to solve this?

  Mac OS 10.11.1; Mac Pro (late 2013) 64 GB of RAM, Lightroom CC 2015

  I think I have reduced corruption in a particular catalog or catalog file is referencing. It's a bit of a pain, as is my main catalog of work with years of work.

  When I try and export this particular catalog as a new catalogue, she leaves partially with an unexpected error. When I try and import the catalog to a new catalog it gets so far and then it just hangs.

  The only solution I can think of is to try and export the catalog in smaller pieces so I can reduce it to the other party or the catalog file is stuck on.  Unless someone can suggest something else I could try?

• Can I update Firefox without going through the Google game?

  I have a Google Nexus 5 last month. I discovered that for update of Google Chrome, I had to have a Google account. I have a Google account, but don't want to use it on my phone. Whenever I run Google Chrome, a message appears indicating that a new update is available. So, I decided to try Firefox. I discovered that if I tried to download Firefox on my phone on this site, asked me to create a new Google account or with an existing log.

  I did some research and came across a question on this site that someone asked how they wanted to download Firefox for their phone without using Google Play. Someone posted the link "https://ftp.mozilla.org/pub/mozilla.org/mobile/releases/latest/android/multi/". I activated the setting "Allow installation of applications from sources other than the game store". I was then able to download the file. I then installed Firefox.

  I'll be able to update Firefox without having to use a Google account, because I downloaded Firefox on this site instead of Google game site? I want to keep Firefox on my phone, but not if I will not be able to update without a Google account as with Google Chrome. I don't know if support for reading is as good as Google Chrome, like when I went to a site where I could play a video in Google Chrome, the video wouldn't play.

  Currently versions Release and beta will only updated if installed via Google Play.

  Only the Aurora and the Nightly channel development (where 30.0a2 and 31.0a1 under development on) gets updates in apk manual install.

• I can't get Acrobat Reader DC quit smoking!

  Help! I can't turn off my computer because it says that Adobe Acrobat Reader DC has still a task that runs and I have to close the task before it can close the program and then turn off my computer. Problem is that I can't close the window and it won't let me even quit smoking using the toolbar.

  Thank you!!

  Hi PRISCILLA CHASE DURAN,

  Could you please let me know the version of the player and the version of the OS on your system?

  Please try referring to this article: Troubleshooting of errors, freezes | Adobe Reader | Windows

  Also if you have a windows OS, open the Task Manager by pressing CTRL + ALT + DELETE on the keyboard and close the open task associated with reader.

  Let us know if that helps.

  Concerning

  Sarojini

• HP 6830 s - KE977AV: after installing the W10, I can't reactivate my bluetooth

  Hello

  Before installing Windows 10, I disabled my bluetooth via the HP Connection Manager module. The module cannot be seen in the BIOS.

  After you have installed windows 10 x 64 from the DVD, I can't reactivate bluetooth via the operating system because it is not detect it and HP connection manager cannot be installed on Windows 10.

  Y at - it a solution for my Bluetooth without formatting my computer (for example: get a working version of the HP Connection Manager)?

  Thanks for your reply.

  Hello:

  I've done it before...

  Try the HP Wireless Assistant software instead and see if it works on W10.

  You can use this software to activate the HP bluetooth module and then uninstall it once you have it visible.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_84194_3&swEnvOid=4059#tab1

• After installing SP3 on XP can not get computer to boot...

  I installed SP3 on XP. When I turn on the computer, it takes me to the screen to select a start upward. I does not start in safe mode, when I choose the other options of the Windows XP screen comes up but it does not start...

  Hello

  Try to uninstall Sp3 via the recovery console.

  Here are the steps that you must follow

  Thank you

  Thomas

  Link: http://support.microsoft.com/kb/950249

  Method 4: Use the Recovery Console

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you cannot remove Windows XP SP3 by using one of the previous methods, follow these steps:

  1. Insert the Windows XP CD in the CD drive or in the DVD drive and restart your computer. When you receive the following message appears, press a key to start your computer from the Windows XP CD:
     Press any key to boot from CD

     Note The computer must be configured to boot from the CD or the DVD player drive. For more information on how to configure your computer to start from the CD or the DVD player drive, refer to the documentation that came with your computer or contact the computer manufacturer. Alternatively, you can use a Windows XP boot disk. For more information, see the following article in the Microsoft Knowledge Base:

  305595 (http://support.microsoft.com/kb/305595/) how to create a boot disk for an NTFS or FAT partition in Windows XP
• When you receive the Welcome to Setup message, press R to start the Recovery Console.

  Note Several options will be displayed on the screen.

• Select the correct installation of Windows XP.

  Note You must select a number before you press ENTER, or the computer will restart. Generally speaking, only the1: C:\Windows is available.

• If you are prompted to type a password to admin, do. If you do not know the administrator password, press ENTER. (As a general rule, the password is empty.)

  Note Do not continue if you do not have the administrator password.

• At the command prompt, type cd $ntservicepackuninstall$ \spuninst, and then press ENTER.
• At the command prompt, type batch spuninst.txt, and then press ENTER.

  Note The Spuninstal.txt file appears. As the file scrolls down, you will see errors and files that are copied. It is a normal behavior.

• After Windows XP SP3 is removed, type exit and press ENTER.
• Restart the computer in safe mode. To do this, press F8 when the computer restarts.

  Note After you restart the computer, the computer may stop responding, and you will see a black screen. The mouse works. In this case, restart the computer by turning off the computer, and then turn it back on. The second reboot allows you to open a session.

• When the computer restarts, Windows Explorer (Explorer.exe) does not run and the icons of Windows and the Start button are unavailable. To resolve this issue, follow these steps:
  1. Press CTRL + ALT + DELETE and then click Task Manager in the Windows security screen.
  2. Click file, and then click new task (run).
  3. In the Open box, type regedit, and then click OK.
  4. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RpcSs
  5. In the Details pane, right-click ObjectName, click modify, typeLocalSystem in the data value box and then clickOK.
  6. Restart the computer
• Use one of the previous methods to remove Windows XP SP3 from your computer.

For more information about how to install and use the Recovery Console, click the number below to view the article in the Microsoft Knowledge Base:

307654 (http://support.microsoft.com/kb/307654/) how to install and use the Recovery Console in Windows XP

If you need assistance on how to install, reinstall, or uninstall Windows, visit the Microsoft Web site at the following address:

http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall (http://windows.microsoft.com/en-us/windows/help/install-reinstall-uninstall)

• I use the latest version, but it won't let me install Adblock Plus because he thinks I'm using Firefox 2.0. YouTube also thinks I'm using an older version.

  I tried to update to Firefox several times, and I completely uninstalled and then installed again.

  You have a corrupted user agent:
  Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; RV:1.9.2.8) Gecko/20100722 Firefox/2.0.0.11 (.NET CLR 3.5.30729)

  See find which version of Firefox you are using and Web sites or modules incorrectly report incompatible browser

  See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

  Check general.useragent preferences on the topic: config page.
  
  You can open the topic: config page through the address bar just like you open a Web site.
  
  Filter: general.useragent
  
  If all general.useragent prefs are "BOLD" (user set) then right-click this pref and select reset.

• Vistas froze after installing music. How can I return to the desktop and start menu?

  I installed I Tunes and the computer froze. I either get a boot manager and repair cannor black screen or a blue screen with a message from recently installed warnng software is causing windows at startup of the ot and uninstall.  HPW can I take the Office of the screen so I can't enter the Panel, programs and features?  Help! Just to note, I uninstalled and re-instralled I Tunes twice because it was what information I uncovred to try.  But the screen does not move to the deskton screen and start menu. Any help would be appreciated!

  Hello

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• After installing the updates I can no longer access the internet.

  Lan/isp connections still work and I do not have access to electronic mail. It's just the internet connection. When I do a system restore, the internet connection works again. This problem occurred the first day of the updated version (14 I think). I tried to install twice since then, and both times the same thing happened.

  It is a system at home and I am running Windows Vista on my desktop. Cox cable is my ISP. I also have a cisco wireless router, a laptop running windows 7 and a network printer. The computer laptop and printer still function well after the update. Only, I lose the internet connection on the desktop?

  This who should I try to do?

  Hi dream,

  What are the KB numbers of the recently updated Windows?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps in the link and check if that helps.

  How to troubleshoot network connectivity problems in Internet Explorer

  Method 2: Reset the sock of TCP/IP and check if this may help.

  How to reset the Protocol Internet (TCP/IP)

• After installing Linux my laptop can not initialize properly

  OK so I installed Linux ubunto and I dual boot with my standard version of Win, when me and my friend tried to simply go back to Windows, we have restored to the original with the backup disc only problem is that now the program (GRUB) that loads when you choose your operating system is still on the computer.

  It gives me an error message 22 every time... I was told that I have to reset the master boot record or something like that, but I don't know how if someone could please help me?

  Which would be greatly appreciated!

  Your MBR (Master Boot Record) contains the GRUB loader. You must recover its original content.

  For win95/98/me, you are using 'fdisk /mbr' with a boot disk.
  With win2000/xp you start the recovery by using the installation CD console and type fixmbr

  Albert

• HP Desktop: after installing windows 10 I can't seem to download the pdf files, what I am doing wrong?

  When I try to download the pdf files from my email, or on a website to print or save, nothing happens.  Don't I have some setting wrong?

  Vikkilynn50, welcome to the forum.

  You must download and install the latest version of Adobe Acrobat Reader.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.