After installing antimalware doctor, tried to restart, but does not start...
.. .He is as file system of the disk is not recognized never gets to a point where I can enter in F8 safe mode. The drive is recognized in the BIOS and diagnosis Seatools says its OK. Use a LiveCD of ubuntu, I can access the drive and see the file system. Tries to start on a Windows XP CD to the recovery console to run chkdsk, fixboot, fixmbr etc., says it cannot detect a hard drive. Can anyone help?
Certainly, you have a SATA hard drive. The original Windows XP CD does not include a driver for the SATA drives (Ubuntu and the BIOS most recent do). When you boot from your Windows XP CD, you will probably come to a point where it asks you to press F6 to install additional drivers. Here's where you need to press F6 and then install a floppy with the SATA drivers on them. If you do not have a floppy drive, things get complicated, you may need to create a XP CD slipstreamed with the pre-installed drivers. You can probably find the SATA drivers from the Web site of the manufacturer of your computer or the drive manufacturer's Web site.
"Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
<>http://support.Microsoft.com/kb/314859/ >
If I were you at this point, I would be your drive Ubuntu allows you to save your data from hard drive on a USB drive or a network drive, and then reinstall Windows. You can probably press a combination of keys very early in the boot process before the Windows startup that will render your machine on the condition that bought from a recovery hard disk partition. This is a radical step, but you might find it faster to attempt recovery. Check the Web site of the manufacturer of your computer for a user manual for your computer that describes how to do this.
HTH,
JW
Tags: Windows
Similar Questions
-
After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up. Windows does not start normally. Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...
Hello
· You receive an error message or error code when you try to start in normal mode?
· What is the number and the model of the computer?
Follow the steps below and check, if it helps:
1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249
2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717
-
rpet installed iOS app "charged hydrated: application" but does not load
Hello
I installed my phonegap build app on my iPad. rpet installed iOS app "charged hydrated: application" but does not load. Keep saying please wait on the black screen.
Any ideas of how to debug this problem?
Thank you!
First, find out if it's a problem of hydration.
Turn off moisture, rebuild and install, then launch the application. It remains only to display and clear the screen?
BTW: Be aware that configuration changes are ignored as long as hydration is activated during the generation.
-
Lightroom CC (2015) does not start under win 10 program.
Program diagnosis announcement only Lightroom is not compatible. J’ai installed several times and disconnected. LR does not start. Hepatic program, but it does not work. How do I correct?CHETNA Hello!
It works again! Thank you and have a nice day!
Snowy greetings from Finnish Lapland.Thank you
Veikko Hamara
-
PC runs, but does not start. Monitor, keyboard and mouse with no signal.
PC runs, but does not start. Monitor, keyboard and mouse with no signal. Pretty much. And when you want me to remove the battery of the bios, or whatever, it seems tight and hard to get out because it is surrounded by other elements.
All fans work, the power/battery or anything that works I think that, since there is a fan on the right where it is and it seems to work. I remember what happens before, I don't know, but before that, there are many gels. This error below was made before all this happened, but I managed to run f8 and then run normally until it freezes again. Then, after that, it runs but does not start. No beeps etc. The best fans will have plenty of vouches and Bravo to wherever you like me to vouch or maybe send the great service that you provide to administrators if that's even possible, haha.
Thanks in advance.
"
The file is possibly corrupted. The file header checksum does not match the checksum calculated. »
It is a sign of a lack of food. Looks like you have a desktop computer?
Power supplies run about $50. It is a rectangular box at the corner of the system in which the power supply will from the outside. It's a pretty standard form in most of the PC and with a little investigation thorough replacements can be found.
It is usually held in place by 4 screws and can be held in place with a spring clip.
Most essential, is that you need to buy a replacement with the right number of straight plug forms to adapt to your PC.
This seems more complicated than it really is and takes about 5 to 10 minutes to do the replacement.
Look at the power output of the power supply failure and buy a new, more powerful. New desktop PC usually come usually with a diet under size and what are the causes these failures is too strong a request for devices you have connected. So, buy one with a higher power rating. Usually about 500 Watts does the trick.
If you do not feel upwards to this task, a technician should not charge you much like this.
-
Put 8g memory in ES1-512 but does not start. Card say that it will accept up to 8 GB. He went out, re he sat several times without success. Does anyone else have this problem? Thanks in advance.
Hello
Here's the original memory stick for Aspire ES1-512:
KN.8GB07.013 SODIMM.8GB.DDR3L - 1600.KINGSTON OR
Compatible memory: Kingston
-
OSX suddenly stopped and restarted but does not restart. Lines of color on the screen
Hello
I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.
The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.
When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.
Can someone help me find a solution or help me pin point the problem?
From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.
Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.
I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.
If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.
If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.
That first, then write again for additional suggestions if you are still having problems.
-
Recovery partition is there but does not start Recovery
Hello
When you try to restore the image (F11 at startup), the laptop seems to be as he tries to start missing Windows installation (Windows Boot Manager error page).
Partitions 'SYSTEM', 'HP_RECOVERY' and 'HP_TOOLS' have not been affected. Recovery files of ~ 15 GB are still there!
The Windows (2nd primary) partition was deleted and then recreated as an NTFS partition. Since then, the recovery process does not start.How can I restore my intact HP_RECOVERY partition system without using recovery DVD? (I can't access right now.)
The partition Windows has need of a specific disk label? What is the magic that breaks the recovery when an NTFS partition is all simply deleted and then re-created?
PeterHP ProBook 6550 b (WD701EA #ABD)Solution: How to fix F11 penetrates is not in the Recovery Manager process
You will need:
-This fix by HP: difficulty to the Multi-partition HP Recovery Manager (the ProBook 6550 b is not listed as a supported model, but it worked for me)
-installation of Windows (see partial solution above) a job to install the fix on your ProBook
or
-sufficient knowledge to extract the winre.wim missing the fix above, copy it to your recovery partition and to apply any measures necessary (I did this)
Steps to follow:
-in your work on your ProBook Windows installation open the file downloaded "sp48415.exe".
-the files will be extracted in "C:\swsetup\SP48415", open this folder in Explorer
-Right click on "F11SPFix.cmd" and run as administrator
-the patch will be applied
Restart und press F11 at startup to enter your recovery Manager (hopefully) fixed.
Credits to HP support.
-
Ran Disk - finished - Restart - Recovery does not start
I had a problem with my HP DV7 - 4069WM Notebook PC, and I was only left with one choice. Order and use the recovery disc. I got the recovery disk and it ran; Then it said that the recovery is over and it restarts. After reboot, it is, it does not start, it's just stuck on the HP logo. I have try the ESC, F keys keys #, the only feedback I get is these error noises. Help.
Hello:
If you remove / unplug the secondary HARD drive the PC gets stuck on the home screen?
You can try to install W7 using this workaround solution.
If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.
Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.
Use 25 characters on the PC product key to activate the installation.
The key will activate a 32 or 64 bit installation.
Then go to the support of the PC and driver page to install the drivers you need.
Link to downloads ISO of W7 is below.
http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/
Paul
-
MacBook Pro-life extendable start-up chime, but does not start
I have a start 2011 15 "MBPro8, 2
Quad Core Intel Core i7
2.30 GHz
Boot ROM version: MBP81.88Z.0047.B2A.1506082204
Intel HD Graphics 3000 VRAM:512 MB
AMD Radeon HD 6750M VRAM:1 GB
8 GB of RAM 1333 MHz DIMM0
It will not start. Trying to start the machine, it enters a loop-
1. startup chime
2. grey screen with Apple
3. the small wheel starts to turn under the Apple
4. the screen goes black
... and the cycle starts over.
The computer does not start in Mode safe. In an attempt to safe mode the loop above has the addition:
3. a progress bar is displayed but does not progress.
I have reset the PRAM
It will start up in target Mode, so I was able to recover data
In target Mode, I was able to run first aid utility on the drive. This has not fixed the problem.
I can hold down the Option key and see Macintosh HD and the recovery Partition. If I try to boot from the recovery partition, I get the same loop.
I can start in the Test of online material, which revealed no material problems
I can boot in Verbose mode and it always happens in the same place
Execution fsck_hfs (version 226.1.1 of hfs)
BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory
' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?
Other thoughts?
Have you tried resetting the SMC?
Reset the management system (SCM) controller on your Mac - Apple Support
-
With or without the adapter is connected to the computer (well known socket), the computer will not turn on. The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top. Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new... Any help would be great!
Hi @joshuaj21,
Welcome to the HP Forum!
It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more
I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times. Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 . You use a power bar? Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.
Please let me know the results.
Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy
-
Satellite A300 - rotates but does not start
Hello
I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.
I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.
Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
Thank you very much and sorry for my English written: S
Diego
Hey Buddy,
> I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.
But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.
-
Touchsmarrt Tx2 turns on but does not start.
The laptop turns on I hear the fan, the caps lock and a lock of numbers blink, but it does not start. I'm runnin windows 7
Home premium. I did recent changes. Just put computer in mode 'sleep' and he won't wake up. The wireless light is orange.
Electrical components sometimes must have all the food sources removed and reintroduced to work properly. Try to perform a hard reset first, if this does not work then we will move on to the next step.
To perform a hard reset
- Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
- Unplug the adapter from the laptop.
- Remove the battery from the bottom of the laptop. There will be a switch/battery eject button.
- Wait at least 1 minute with all sources of power disconnected.
- Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.
-
Pavilion 15 - p002nia: HP Pavilion 15 - p002nia fan runs but does not start
My 2 year old son poured drink chocolate on the keyboard of my laptop 15 - HP Pavilion p002nia recently bought. When I found out, the laptop had stop, all efforts to start failed. White LED light on the button walk / stop would stay and fan would run for 30 seconds, stops, starts and stops continuously. The system does not start. What can I do? The jury is dead?
Hi TheOldMan, thanks for your response. But, someone suggested I have dismantle the system, clean with alcohol and dry that it might help the dos system.
-
Acrobat Pro XI installed on Windows 7 but does not start
I purchased a standalone version of Acrobat Pro XI and installed on my Windows 7 computer. The first time I try to run, I get a window asking me to check the serial number. The DDL for the product name does not list Acrobat Pro XI and it does not accept my serial number (even if I copy / pasted from the page of order on the adobe.com website). It is said that the serial number is valid, but that the product is not on the machine. And yet, when I browse to program files > Adobe > Acrobat, alto - it is.
When I double-click on the exe file, I get the message, 'validation serial number', followed of "serial number is valid, but no product calling is not found...". »
I tried uninstalling and reinstalling several times, to no avail. And Yes, I also tried to restart after the installation as well. I am, of course, on a deadline and really needs this job...
Help!
Assuming that you are installing an upgrade version, you have the SN of the eligible current modernization (AA9 or AA X) version?
Maybe you are looking for
-
Wow, I just realized, with the new update for Sierra, My Documents folder has been MOVED to iCloud. I thought that I did a lot of reading on the new update before actually doing it, and I NEVER remember reading that would happen. I know it says what'
-
Pavilion p6213w x 64: Windows HP Pavilion 10
I'm struggling Windows 10 update. I run a small business and simply have no time for headaches or loss of time. That said, I wonder if: (1) I have to update my bios which is currently 2.5 smbios version/date: american megatrends 5.43, 09/10/2009?
-
El Capitan Pages of text link box
Hello I've recently updated to a new MacBook, Pages 5.6.1. I opened a document in pages with linked text boxes. When I hover the cursor text box anchor turns to resize. I tried a few different things so he can link from one page to another, but have
-
As above
-
Cannot forward/reply by e-mail on a Web site in Internet Explorer
original title: e-mail messages in one website cannot be passed /reply; the original text does not appear on the answer page. If the message is sent then the MSG cannot be interpreted as text by the recipient. in a site web www.indiatimes.com e-mail