After installing the adapter Netgear wireless, I get an error stating that "the network is disconnected.

original title: network problems

I recently installed the Netgear Wg111v2 wireless adapter and a router netgear WPN824v3 wireless... All Indications, that it should work... Instead, I get a message... «the network is disconnected...» "I checked all the connections m... Nothing seems to work... What I am doing wrong?

Hello

Did you try to scan for networks.

If so your router/network name

If you see it please select and connect, if have set up a secure connection, you must ensure that you put in the password / key.

And you should be able to connect to the network without any problems.

If the problem persists, please respond back with

What happens when you search for the network

What happened when you click on to connect.

And what happens if you try the same steps after the reboot of the router and your computer.

Thanks for your time,

Tags: Windows

Similar Questions

  • I get an error stating that my serial number is valid, but cannot find a product calling it on this computer. Help, please.

    I get an error saying that my serial number is valid, but one product calling is not found on this computer trying to download Adobe Acrobat X Pro. Any advice?

    This means that your Acrobat X license is an upgrade, and it asks you to provide the serial number of the previous version which qualifies you to use the upgrade.

    Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

    http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  • memory problems after installing the network card passthrough.

    First of all, Thanks for the help.
    I installed a network card passthrough directly to a Windows machine on ESXi 5.1 and start the machine when I get the error:

    Group VM.6791: invalid parameters for VM memory allocation vmm0: XXX. () min: 3670016, max:-1, minLimit:-1 actions:-1 units: pages)
    Group VM.6791: cannot Admit VM: memory admission check failed. Asked booking: 3716761 pages
    SharedArea: Unable to find 'testSharedAreaPtr' in SHARED_PER_VM_VMX domain.

    I looked at articles and don't see that only the value parameters Backup of the RAM, but If I change these settings, I get the following error:

    Not valid parameter memory: memory reservation (sched.mem.min) must be equal to memsize () 14336) .

    Thanks for the help.

    What is the memory you have allocated for this machine?

    Can you increase the amount of memory reserved for this virtual machine to its configured memory size and try to turn it?

  • Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

    I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

    This happened to someone else? Is it I can do it fix it?

    Hello

    Since you get such a serious mistake, I would use the free incident reports.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • After installing the version 36.0 whenever I go to a Web site, I get "server not found" and I have to refresh

    After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access.

    I checked my firewall and it is configured correctly.

    And I changed the proxy for 'no proxy '.

    Still not fixed.

    Thanks in advance.
    David

    I went back to the 35.0.1 version and it seems to have solved the problem.

  • After installing the last "Update Agent" I can always get updates for Windows 7 Home Premium?

    After installing the last "Update Agent" can't always updated for

    Windows 7 Home Premium?  After 2 days in dealing with this problem, I came to help?

    Someone please give me an answer!

    E-mail address is removed from the privacy *.

    Hello

    Please contact the Microsoft community.

    As you said that you are not able to get new updates of windows on the computer.

    I would like to ask some questions about your request:

    1. When was the last time that you install the windows desktop update?

    2. You receive an error message from the updates?

    3. You use any third-party antivirus on the computer?

    4. Did you do any change on your computer before the show?

    Please refer to the reference to the link below for " " " The problems with installing updates".

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

    Please get back to us with the information in short so that we can help you further.

  • PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

    I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

    The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

    I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

    Finally, I have checked the audio drivers and the reporting system they work without any problem.

    What should I do next?

    Thanks, Terry

    @Terry57

    Thanks for the reply,

    I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

    However, I have provided details below:

    To perform a hard reset on a computer equipped with a removable battery, follow these steps:

    1. Turn off the computer.

    2. Remove the computer from the docking station or port replicator.

    3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

    4. Disconnect the power adapter from the computer.

    5. Remove the battery from the compartment to batteries.

    6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

    7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

    8. Press the power button to turn on the computer.

    9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

    10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

    To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

    1. Turn off the computer.

    2. Remove the computer from the docking station or port replicator.

    3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

    4. Disconnect the power adapter from the computer.

    To perform a system recovery, this link should work: click here

    Keep me posted for any technical assistance,

    Kind regards

  • After installing the runtime Visa my mouse moves with COM data

    I'm sorry, I don't know anything about Labview I use prepared GUIs.

    After installing the runtime Visa540 my mouse moves whenever I get the COM1 data. How can I turn that off?

    You use a USB-serial adapter?  Has been sending peripheral data when you start the computer to the top?  The device sending the data while the USB adapter has been being connected?

    It's probably a Windows problem.  If you connect a serial device (adapter USB-serial anytime or a build/PCI serial port at startup) and the device sends data, then Windows think that standard equipment is a mouse.

  • I can't download and install updates to Windows or games on the internet. I get an error saying that I am not on the internet.

    I can't download and install windows update or games on the internet, I get an error saying that I am not on the internet, when I help

    Trinity

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    3. what version of Internet Explore do you use?

    Method 1:

    If you are using windows 7, I suggest you check in SafeMode with network.

    Advanced, including safe mode startup options

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Method 2:

    I suggest you of due to windows update, please see the link.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

    Method 3:

    I also suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    See also:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  • After installing the recent update I receive emails, but cannot send

    After you have installed 9.3.1 I can receive emails, but when I try to answer that I get an error message that does not have the password of the account. The password has not changed since before the update. Any help?

    Check the outgoing mail server setting. Make sure that your user name and password are there.

    Settings > Mail, Contacts, calendar > your account > account > outgoing mail server - tap the name of the server next to SMTP check in the main server and make sure that your user name and password are entered and correct - even if it says that the password is optional.

  • My MBP in trouble after installing the Wacom Intuos driver.

    My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

    and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

    I try to contact Wacom support in Hong KONG but still no body to answer my call...

    Can be resolved by upgrading to IE captain? Thank you very much!!!

    Wacom driver: 6.3.15 - 1

    News by cheque to be:

    EtreCheck version: 2.6.6 (226):

    MacBook Pro (13 inch, late 2011)

    MacBook Pro - model: MacBookPro8, 1

    1 2.4 GHz Intel Core i5 processor: 2 strands

    4 GB of RAM expandable

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

    Intel HD Graphics 3000 - VRAM: 384 MB

    Color LCD 1280 x 800

    OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

    Disc information:

    HGST HTS721010A9E630 disk0: (1 TB) (rotation)

    EFI (disk0s1) : 210 MB

    1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

    HD (disk0s3) [recovery] recovery: 650 MB

    MATSHITADVD-R UJ - 8À8)

    Configuration files: (Does that mean?)

    / etc/hosts - Count: 57

    Startup items: (Does that mean?)

    PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

    Startup items are obsolete in OS X Yosemite

    Launch system officers: (Does that mean?)

    [loading] com.apple.RemoteDesktop.plist -invalid signature!

    [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

    Top of page process CPU: (Does that mean?)

    55% mdworker (3)

    4% kernel_task

    4% WindowServer

    2% fontd

    2% hidd

    MacBook Pro, OS X Mavericks (10.9.5)

    Speed up boot times-

    Start time - speed (2)

    Start time - speed (3)

    file/etc/hosts - fixing a pirate

    You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

    Crucial

    Other World Computing

  • I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

    I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

    Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

    Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

    You can find more details about it in this KB:

    3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

    And to keep a copy, here's more information:

    How to stop missing delivery Notification whenever I build an installer?

    Best regards

  • have problems printing wirelessly on my C510 estn. I get an error message that says: I'm paper when I did the paper

    off message on my c510 estn paper

    I have problems printing wireless to my C510 estn. I get an error message that says: I'm paper when I did the paper

    Hello

    1. what operating system is installed on the computer?

    2. were there any changes (hardware or software) to the computer before the show?

    Perform the steps in the article mentioned below and check if the problem occurs.

    http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=4073314&prodTypeId=18972&ObjectID=c02248120

    Hope this information helps.

  • My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

    Vista Business Service Pack 2
    32 bit
    2007-12-office
    Acrobat 9 Pro
    Adobe Design Standard CS4
    Sony Vaio

    I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
    Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

    I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

    I can't use restore because it says that the disc is damaged and needs to be checked.

    Any ideas are appreciated.

    Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

    Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

    If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

    If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

    I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

    If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

    Good luck!

    Lorien - a - MCSE/MCSA/network + / A +.

  • No icon after installing the application

    I'm back in coding after a VERY long time (over 12 years) and am myself easing with HTML5 for the Playbook development. I managed to put together a very simple little app, especially as a test of the procedure for packaging and submission... and maybe get a free Playbook for my wife who covets my 64 GB baby!

    Anyway, had everthing packaged and signed using ripple (an excellent program once I worked out how to use it) and he expelled.

    Last night I got a reply that it had been rejected because "no icon after installing the application.

    When I sent the thing to Blackberry I included two .png files, which was to be used as an icon, but I think I was also to include in the compressed... am I right in thinking, I should have added a line of code in the XML file to set this?

    I feel like a total * beep *... like the time where I got a test paper in college without putting my name on it!

    Welcome to BlackBerry WebWorks development!

    Yes, you provide your name and the home screen icon in the file config.xml WebWorks.

    Here is an example of a config.xml file:

    https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/code_sample_creating_a_bb_widg...

    Here's a guide for each of the items in this file.

    https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/working_with_config_xml_file_1...

    Also, for your interest, check out some examples of existing applications published on github:

    https://github.com/BlackBerry/WebWorks-samples

Maybe you are looking for