After installing the latest updates, my screen on large icons, screen too big for my moniter

Similar Questions

• Cannot start after effects CC 2015 or first CC 2015 after installing the latest updates?

  First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code

  Hi Shawn,

  First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code

  Update for Premiere Pro CC 2015 (9.2) and after effects CC 2015 (13.7) for a fix.

  Thank you
  Kevin

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• The computer hangs after installing the latest updates

  I installed the latest windows updates.  Restarting my computer later, since hanging / freezing for half a second every 2-3 seconds.  I notice it more while trying to move the mouse or by watching a video (someone who speaks seems to stutter on about every 5th Word).  The computer clock has also been slowing.  He gets about 10-12 minutes behind before he catches upward.  When I look at the Task Manager, I do not take a lot of cpu.  Restarting the computer didn't help.  I've never had this problem before.  Any suggestions?

  Often by rebooting the computer solves an immediate problem.

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.

• I can't sync my iPhone 4S with my Macbook Pro more. It became a problem after installing the latest update.

  A couple of weeks ago, I upgraded my iPhone version 9.2 and iTunes on my Macbook Pro version 11.4, and now I can't get my iPhone to sync with my Macbook Pro. Whenever I connect the two devices, I get an error message that says: "the 'IPhone of John' iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "

  I tried a lot of things, starting with resets hard and finally erase all data and settings of my phone, but without success. I would use an iTunes backup, but he refuses to communicate with my iPhone.

  Is anyone familiar with this problem? Thanks for your time.

  You you make sure that you run version 12.x iTunes on your Mac? If your OS x cannot run iTunes 12, you cannot synchronize your phone more set to update to iOS 9.x

• Global problems with IE crashing after installing the latest updates from Ms.

  After the installation of the last series MS Updates, we are seeing users get first notification DEP for Windows Explorer (using IE7), then an other error message stating that Windows must close THE Explorer. What happens when users try to access our portal Citrix Presentation Server SSL/VPN.

  Hi Chad t,

  Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system.

  The main advantage of the DEP must help prevent the execution of code from data pages. In general, code is not executed by the default heap and the stack. Hardware DEP detects code that is running from these locations and throws an exception when execution occurs. Software DEP can help prevent malicious code to take advantage of exception-handling mechanisms in Windows.

  Microsoft does not recommend to Turn off the Data Execution Prevention (DEP).

  For more information on DEP, you can access the link below for the blog that talks about the DEP and the DEP/NX problems.
  http://msdnrss.thecoderblogs.com/2009/10/10/understanding-depnx/

  As you mentioned it started after the updates, I also suggest you to uninstall Internet Explorer and put it back manually and see if the problem persists. Access the links below for the steps to uninstall and reinstall Internet Explorer 7 respectively.

  http://support.Microsoft.com/kb/927177

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B&displaylang=en

  For further assistance, you can also consult to Citrix Support to see if they have a fix or a workaround is available.
  http://www.Citrix.com/lang/English/support.asp

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After you have installed the latest updates it freezes and blue screens or?

  I have installed the latest updates and it did not even to the part where he set up after a reboot.  Now I'm stuck in safe mode and no alternative.  Updates are not listed in the list of installed updates and I tried to do a repair of the system from the installation cd and I'm tempted to do a restore system since the day before two weeks before updates.  Nothing works.  Any suggestions will help!  I'd hate to reinstall because I have no backup support.

  Update: the event log has nothing in it to try to start safe mode.  If the problem occurs before the event log service was started.  I tried to uncheck all part 3 applications and services in msconfig.  I'm out of ideas.  Someone has everything?

  I said that I tried to do a restore from the day before and up to two weeks before the updates.  I actually found the problem and he had nothing to do with updates.  My crapped out video card and ATI Control Center was freezing at startup.  So I took out the video card and it starts perfectly.  Thanks for the help anyway.

• I can't boot after installing the latest win xp updated system - missing or damaged/system32 hal.dll

  I have win xp and that you have installed the latest updates 7 system - now I can't start.

  I get the message:

  Windows didn't start because what follows is missing or corrupted /system32/hal.dll

  I don't have a CD system - which can do? everything I read said to alter, copy, etc., but since I cannot start, I can't do it all.

  Help me please, thanks

  XP trying to tell you that it cannot find the file.  It is extremely likely that the hal.dll file is really missing or damaged (XP just cannot find it).

  You should not have the Windows XP installation CD for this problem.

  It is very unlikely that the manufacturer will be able to you provide a XP installation CD, but contact them if you wish.

  What would you do if YOU were the manufacturer?  Communicate with yourself?

  The instructions in this link to replace the hal.dll file are bad, bad, bad.  If you follow them, you will need to replace the hal.dll file, but it will not be the correct hal.dll file.  There are 7 possible hal.dlls on the Windows XP CD, and check out the generic hal.dll file won't be one you need unless you run a virtual machine.  Clearly, the technical support engineers have never actually solved this problem.

  Notice that the thread is not marked as 'response' by the original poster, but by a moderator of the Forum after a period of 5 to 10 days of inactivity where some MSE posted a link to a few articles in the KB (this is how things work here).

  You should start by making a bootable CD of XP (no XP media required) Recovery Console and run chkdsk /r first just to be sure of the file system NTFS is not damaged.  Then see if you can start after that (maybe it won't).

  THEN, you must use the Recovery Console to rebuild your boot.ini file.  I would like to rename the file c:\boot.ini first then you don't rebuild on top of the afflicted (this part is missing from the article).

  I can't understand why Microsoft support engineers seem unable to display instructions to make a CD of bootable XP Recovery Console.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton and Spybot.
  AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Here's how to make a CD of bootable XP Recovery Console:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  If you still have the same problem (likely), then the value rebuild your file c:\boot.ini as article says here:
  http://support.Microsoft.com/kb/330184

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Phone crashed when installing the latest updated software

  I was download and install the latest update for my phone and it crashed.

  How to restore its functionality?

  Try to connect the device to your computer and iTunes and try to restore. What do you see on the screen right now?

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

  Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
  Operating system: Windows XP

  Hi depreciated,

  Thanks for posting in the Microsoft community!

  If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

  (1) did you make any changes before the show?

  The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Note: after using the .net Framework cleanup tool, please install all .net Framework components.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.