After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
Select 'R' in the first screen to start repair.
one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
also, I can still use the old drive hard when it is installed on my laptop!
HP pavilion dv5220us running windows xp
I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
internet security Norton 2011

Hello panjok2,

Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

Let us know if you have any questions.

Best regards

Matthew_Ha

Tags: Windows

Similar Questions

  • Having trouble installing new drivers after installing a new hard drive and Windows Vista.

    I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

    original title: new installation from hard drive problem

    Hello

    I suggest that you run the Startup Repair tool and check if it solves the problem:

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

  • Can I install a new HARD drive and use an old backup

    Just, I got my new Dell's HARD drive and need to install it in my Dim 9200. Can I use the old hard drive as a backup drive or secondary without deleting anything or reformatting? I have too many things on the old drive and am not crazy about cloning, I prefer to do a clean install of XP and be able to do things more when I feel the need. Is this possible or am I dreaming.

    Has never done this before so I need help. Thank you.

    Dimension 9200 E6600 2.4 GHz 4 GB DDR2 sdram @ 533 MHZ 4x1Go
    250 GB SATA II Samsung spinpoint drive HARD 8 MB cache 7200 RPM
    Win XP Pro 32 bit OEM Dell

    jgarcia

    After installing the new drive hard SATA and windows installation, etc. and when it works to your satisfaction, put the 'old' drive as the secondary, transfer all the files and folders you need in the new C: / volume, using the option "send to."  Providing the old hard drive has no problems, then the format and partition the drive for additional storage.

    Note. Only files and folders can be transferred, all programs and applications must be reinstalled from their records, or downloaded from the site of the publishers.

    Bev.

  • How to install a new hard drive and create recovery disks before installing the new drive?

    HP Pavilion Dv5 - 2077 cl/entertainment laptop
    Product #: WQ799UA #ABA
    Windows 7 64 bit

    Hello-

    So for a while now, I get a blue screen randomly, popping up all the time and some time, who is going to "clear my physical memory" or something and then restart after like 30 seconds. I posted in the forums, once it all started and support told me to run tests and finally told me that my hard drive has been the reason for these constant errors. Then I backed up everything, in anticipation of a real accident.

    I'm about to order a new hard drive from Newegg.com, and I would like to know if it is difficult to replace a hard drive in a laptop, or if I should have Geek Squad do it for $50. In addition, I don't think I have the disk for the operating system that came with my computer, how do I order that HP and how much is it?

    And, last but not least, is there a message or a video with instructions on how to install a hard drive and operating system?

    Here is the hard drive Im currently looking, if could let me also know if this would be my laptop and if it's a good idea that would be great:

    Thank you very much.

    Hello

    Yes, that's exactly what you do

    Kind regards

    DP - K

  • replacement hard drive and using recovery discs made by myself.

    HPdv6 mobile 2119tx. After replacing hard drive and loading the recovery discs (which I did) successfully, now it reboot something messages cannot locate the disc or load bootable disc (sorry, don't remember the exact wording, but back to the beginning). Could this be because I replaced a 650 GB drive with a 500 GB drive.

    Hello:

    Normally you cannot use recovery on a smaller hard disks.

    But you should be able to boot from the first disc of recovery at least and see what happens.

    To do this, you must have the first disc in your dvd player.

    Restart the PC and at the beginning of your homescreen HP, tap key ESC then choose one time start in the menu.  Since then, select the DVD drive and continue.

    If the ESC key method does not work, press the F9 key instead.

    It depends on the type of BIOS in your PC (normally according to his age) which key you need to type.

  • Install windows 7 on a new hard drive by using recovery discs. (Pavilion all-in-One MS215UK)

    Hard drive crashed and HP sent a new with recovery discs that say they will reinstall windows 7. Discs and installed hard drive run for 'restore factory settings' by following the instructions. Takes about an hour and all 4 disks are asking but then becomes at the end and left with white screen saying "no operating system installed."  Left on for a period simply show this message in case something happening in the background, but nothing happens.

    2 extra drives came with set, but they simply refer to the instructions that make no mention of them.

    Please help I am a novice total things withthese

    Hello

    Download and create the bootable CD as described at the link below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-80183-1&cc=us&LC=en&DLC=en

    When you created this CD, insert it into the system that fails to start, restart, and wait until you see a window with a green check mark.  Next, remove the CD and insert your first recovery DVDs.  Reboot the PC and go through the process of installing the operating system again.  If all goes well, it should install properly this time.

    Best wishes

    DP - K

  • This application could not start because the configuration - side by side - is incorrect

    After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

    Any help would be appreciated.

    Hi ChickC  

     

    Welcome to Microsoft Windows 7 answers Forum!

    a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER:

    sfc/scannow

    The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    ·         Infoermation more on SFC scan found in this document:

    http://support.Microsoft.com/kb/929833

    b. perform a disk check:

    Use the following steps:

    1. Open computer by clicking the Start button, click computer.
    2. Click the drive you want to check, and then click Properties.
    3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

    To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

    To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

    1. Click Start.

    Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

    The .NET framework update

    Download and install the most recent of the .NET Framework

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

    If the error still persists please provide us with the error log:

    Type eventvwr.msc/s in the address bar.

     The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

    It will be useful.

    Thank you, and in what concerns:

    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum

    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

  • How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

    How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

    Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

    Designate a library in pictures - Apple Support System

  • Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

    Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

    Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

    Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

  • I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking

    I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?

    Yes

  • I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACKUP MY DATA

    I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACK TO THE TOP OF MY DATA IF I DON'T REMEMBER MY CODE TO SECURITY/PASSWORD OF THE WIRELESS ROUTER

    You need to reset your wireless router if you do not have access to it to retrieve your security code.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/189126

    "Microsoft's strategy concerning lost or forgotten passwords"

    Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

    See you soon.

    Mick Murphy - Microsoft partner

  • I bought acrobat pro 11, and it will not download.  I get this message: could not open Acrobatpro11_dim as the sponsor's identity cannot be confirmed.  Help!

    I bought acrobat pro 11, and it will not download.  I get this message: could not open Acrobatpro11_dim as the sponsor's identity cannot be confirmed.  Help!

    Gabbimai please try to download using another web browser.  If you continue to experience difficulties with the download process then I would recommend review to find a download link on Adobe.com.

  • Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

    Hello

    Any help step by step to address this issue would be welcome

    On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

    Thank you in anticipation

    Hi BackrowSteve,

    1. did you of recent changes on the computer?

    Method 1:

    If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

    http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

    Method 2:

    If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

    Step 1: To uninstall the package:

    a. open programs and features.

    b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

    c. click on uninstall at the top of the list.

    Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

    Package redistributable Microsoft Visual C++ 2010 (x 86)

    Package redistributable Microsoft Visual C++ 2010 (x 64)

    Hope this information is useful.

  • After installing a new HARD drive, I get a screen "control i to access the configuration utility.

    Help?

    I installed a new HARD drive on my xps 15 because the old drive crashed. Everything works fine and the system boots perfectly. Before entering the Dell splash screen, the screen "control i to access the configuration utility" appears for 5 seconds. After that, the normal boot sequence resumes. Can someone please explain to me why this is happening and what I can do about it?

    Here is a link to the screen I get started: http://s102.photobucket.com/user/alexcinie/media/photo_zpsb75f0a7f.jpg.html

    The mSATA drive is used as a cache for the hard drive dynamic - these are essentially implemented in a RAID 0 array.  See the link below (it is for Alienware, but applies to your system as well).

    If you want to keep the disk cache, you need to configure the array as shown.

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=564442

  • I need to re - download lightroom and photoshop after installing a new hard drive.  Can someone tell me how to do what you please?

    I pay every month for the use of Lightroom and Photoshop.  I recently installed a new hard drive on my laptop, so I have to re - download and re - install LR and Psalm someone can help me with this please?

    Hello

    You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

    You can download the installer for Creative Cloud from here:
    Creative cloud help | Creative cloud desktop.

    After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

Maybe you are looking for

  • Site Web with graphics in a table bad text in the adjacent cell

    Part of my web page code is <table width="95%" border="1" cellspacing="0" cellpadding="4"> <tr> <td> More text in the left <br> And more <br> And even more </td> <td > <IMG src="Kitchener.jpg" style="width:8em; height:10em"> </td> </tr> </table> and

  • appointment from one to the other

    How to make an appointment for a session? I paid for a year and he was only 6 months, so I'm still good. I can't find anywhere how to register for it. Thanks for your help.

  • Microsoft Flight Simulator 2004 vs Windows 7 compatibility

    I installed MS Flight Simulator in Windows 7. The installation went well.And I could start MS Flight Simulator until the home page appeared.BUT: during the opening of "videoparts' (i.e. the statement at the beginning, the parts of MS FS with moving i

  • Installation problem 5610 - file not found

    My 5610 on Windows 7 64 bit don't scan, so uninstalled the Solution Center and printer and tried to reinstall the driver and software.  It fails by giving a file not found error for the following file: C:\Useres\Sam\Appdata\Local\Temp\7zS18AD\Setup\S

  • BBM CSV Files in BBM Android

    Hello In my gemini 3G, I could access CSV files belong to BBM. I then opened the file in the text editor. It would make my job easier if I want to search for particular message when I forgot the sender. How do android BBM? I tried to plug the Android