After installing the Vista SP2, IE 8 does not work well.

Similar Questions

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• Problems galore after installing the Vista SP2

  Once I installed SP2 on my Acer 6920 g, my sound card no longer works. I followed the "Fix It" solution and update its drivers, which solved the problem and his return. When I stopped the machine, he started rebotting, begin a strange "xp" mode, before launching Acer Arcade Deluxe, a media programme. This problem for about two hours, stop, reboot in this program can close again in a loop on and on. Through to hold the power button on the laptop, I managed finally to get the machine to stay 'off '. The following day, when I turned on the laptop I found that repairing the system has been launched, but could not solve the problem, telling me that the problem was the following;

  Event problem name: StartupRepairV2
  Problem signature 01: AutoFailover
  Problem signature 02: 6.0.6000.16386.6.6001.18000
  Problem signature 03:6
  Problem signature 04:524296
  Problem signature 05: 0xf4
  Problem signature 06: 0xf4
  Problem signature 07:0
  Problem signature 08:2
  Problem signature 09: WrpRepair
  Problem signature 10:16385
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Can anyone help? I have an option for 'Complete restoration of Windows', but want to this only as a last resort because I do not have a backup of my files.

  Thank you

  Try this first before reinstalling.

  If it fails, see below, data recovery before reinstalling.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Will not start after installing the Vista SP2

  Last night my old Vista SP2 computer.  Installation seems to have success, but to restart the computer as part of the installation of automatic update, it failed.  During a part of the boot with a screen similar to BACK sequence, it arrested, printed a msg that appears to be in hexadecimal and would go no further.  Restart with a sequence of hot or cold start to produce the same result.  I tried to correct the problem by using the Startup Repair on the Vista installation disc and received a msg that Windows could not repair the problem itself.  I sent the results to Microsoft using this option in the Startup Repair tool.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your can fall into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  More information shows what the process that it loads.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Installed the Windows updates now sound does not work.

  I used the windows update Center yesterday and installed the updates that were for my computer, now my sound does not work. When I try and open "Dolby-Publisher of stars", I get this message:

  
  Any help tp fix it would be greatly appreciated as im am not very wise computer.

  Will,

  According to the scenario provided it seems that the problem is that you have updated the drivers for the audio device, but you have not updated the application (Dolby Home Theater - perhaps). If you have two choices, update the application to a version more recent or uninstall the installed update which is relevant to the audio driver (through programs and features - updated).

  See you soon.

• Disable the Radio button under condition does not work well

  Hi friends,
  
  I have three radio buttons
  
  < li > cottages
  < li > New rental
  < li > in the name of
  
  
  I'll show this option button conditional according to the user who connects to the application.
  
  Suppose that, assume that if a person 'A' concludes the application means that it will be shown only these radio button options---NH---,---OB---,---Self---
  
  Assume that, if a person 'B' concludes the application means that it will be shown only these radio button options - NH-, - free-
  
  If a person "C" concludes the application means that it will be shown that these radio button options - Self-
  
  
  I limited the boxes according to the users who enter the application using their roles.
  
  But my challenge here is once the user and if it someone at - it means radio button, select
  
  Example if he chooses - NH - means, then - OB - and - holiday - radio button must disable and if he chooses - OB - means then NH - and - to
  Disable (vice versa).
  
  I have also done the same with the DA.
  
  With the real action like: javascript Expression I gave the following encodings (I wrote the below DA for the three cases, if the request_class_code is equal to)
  (NH, O, S)
  

  var enabled=$v('P22_REQUEST_CLASS_CODE');
  if (!$u_SubString(enabled,'S')) $('#P22_REQUEST_CLASS_CODE_2').attr("disabled","disabled");
  if (!$u_SubString(enabled,'NH')) $('#P22_REQUEST_CLASS_CODE_0').attr("disabled","disabled");
  if (!$u_SubString(enabled,'OB')) $('#P22_REQUEST_CLASS_CODE_1').attr("disabled","disabled");

  The DA above works great only for the user who has the possibility to view the three radio buttons in my form (i.e)(NH,OB,S).
  
  For the user who has the ability to view two or one option button, it does not work properly (i.e.)(NH,S) or(OB,S) or (S).
  
  Why it does not work for the user with two options or with a radio button medium, the source of this property of radio button option is changing. Given that I took
  the source of my radio button in my DA only when the three options are present.
  
  How I can solve this problem for the user who is having this option two or radio.
  
  We hope to hear you clearly on the issue.
  
  
  Brgds,
  Mini

  Hello

  If I did not understand what you have that might work

  var lVal = $v('P22_REQUEST_CLASS_CODE');
  $('#P22_REQUEST_CLASS_CODE input:not([value="' + lVal + '"])').attr("disabled","disabled");
  

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home

• HP Compaq Presario CQ61 laptop: no sound after installing the Vista SP2

  After installing SP2 on my new laptop, I found, on my version check, he did not mention SP1 as having been installed/added.

  Then I tried to UNINSTALL SP2, or take the computer to a previous restore point, as the problem of "NO SOUND" (confirmed by a small circle of Red containing a white "x" icon of speakers [IDT High Definition Audio CODEC] located at the bottom right of the laptop screen may have been caused by adding SP2 without previously installing SP1)

  .

  I discovered that there is no previous restore point (it's a new laptop) - so I can't RESTORE to AN EARLIER DATE of TIME and I have not the slightest idea how to UNINSTALL SP2 - on windows xp I could have just do it through the CENTER OF CONTROL and ease "Add or remove programs.

  • According to the Sound Devices device manager both work properly i.e. the IDT High Definition Audio CODEC and the Intel(r) High Definition Audio HDMI - although I did not understand why I have two devices here, (maybe cos I tried default return of windowsn na sound?

  I guess I could use the back to factory State cd to get her back, once again on my laptop, but I hope that I don't need to do.

  Any suggestions please, because I feel a frustrated mite.

  Hi teacher Cheryl

  Thanks for your reply.

  However, I cannot locate the page you are talking about.

  I seem to have lost in these areas (see * below)

  It seems to be all kinds of pages to do with the support of drivers, updates, but do not know which one to use to do a download of the update that I seems to require (assuming that I don't already have).

  I found what seems to be the driver of Audio concerned especially for the particular model, but do not know if it is the version of correct i.e.latest of the driver or how to download.

  The details are:-

  "The software and the following drivers are compatible with your product and the Microsoft Windows Vista operating system

  ' Pilot - AudioDateVersionPreviousSize' IDT High-Definition Audio CODEC Driver 04 - 20096.10.6159.0 A ' Version: 21,02'

  Also, when I click on "Open Volume Mixer at the foot of the screen, it says"no audio device is installed"

  * I am new to both Vista and HP Care advise and indeed on the Forum.

• After installing the Vista SP2 on a Compaq Presario laptop it freezes and runs slow.

  Very slow Windows 'Welcome' after the access code to fully ready. Applications freezes (message "not responding"), and then continue. Do not have this problem before you install KB 971029 (Vista SP2).

  1A the free trial period of NIS already expired by the time where you installed McAfee Security Center?

  2. do you (a) uninstall the NIS free trial AND THEN download/run the Norton Removal Tool (c) b until you have installed McAfee Security Center?

  ============================

  Assuming that your responses to #1 and #2 are the two no....

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Dv6-1125ee no sound after installing the Vista SP2

  As the subject says, I don't hear any noise of any program after the installation of Service Pack 2 for Vista.

  I am IDT, version 6.10.6209.0000

  I tried microsoft fix, but it did not work. I also tried to find an update for my driver, but it seems that it is the recent...

  Thanks for your help in advance.

  Solved, uninstalled the audio drivers, restarted the computer and windows automatically installed the drivers.
  Hope this helps for others.

• Satellite L300 (PSLB9A) - no internet access after installing the Vista SP2

  Just upgraded my Vista with Service Pack 2 and found that I can not connect to internet sites, have proved SP2 by rstoring to before SP2 and everything is OK, also reloaded the OS with my recovery disks and everything works OK... to - what I load SP2 then when I try to access the internet, I can't , get "IE cannot display the webpage".

  Diagnosis don't report any problems found. This happens with IE7 or IE8, the firewall is off and I can reach any network device, including my server but I am unable to load the web server page, same problem...

  Any help would be appreciated.

  Pete

  Hello

  I googled a bit and found a lot of people who reported on the same issue.
  It s certainly related to Vista SP2.
  You said you used Internet Explorer, I think you should test this also using other browsers like Firefox, Opera, etc.

• PC shutdown after installing the Vista SP2

  I could not read the message whenever this happened because my PC stops automatically, this never happened until I installed SP2. I couldn't install it before until I released the space by moving thousands of videos on a 2 TB hard drive. So what is happening with that and SP2

  * Title *.
  Your current settings are not after the installation of service pack 2

  justinrpg7,
  Use the Advanced startup options , and then select the option 'Disable automatic restart in case of system failure'.  Then the next time it fails it must stop on the error screen.  Post back with the error message so that we can discuss this more.  You can clean boot your system to see if there is a program, possibly the origin of the problem.  You should also test in Safe Mode and see if it happens then. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Project created after installing the new update for CP9 does not not on Web server

  We upgraded 2 computers yesterday with the new update for 9 Captivate and that they will not play on our web server.  We have completed the upgrade of projects work very well.

  New projects are working fine locally.  I had to open these on a computer that has not been to level again and then make a new project and copy the slides in the new draft and publish it.  Then it works on our web server.

  Hi Susan,.

  Can you check with your Web server administrator that the list of permitted such MIME type entry for json files?

  It is a necessity with the changes in the recent update to HTML5 runtime. Please let me know if that solves the problem.

  Thank you

  Aditya

• HP envy 6: after installing synaptic touch driver my touchpad does not work

  My hp envy 6 always automatically update software and after upgrading of the synaptic driver, touch pad doesnot work at all. After that, if I uninstall synaptic driver it works again, and problem is every day automatically portable install synaptic driver

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click the link below to learn more the following steps to resolve this problem of troubleshooting

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5229455&calledBy=&docid=emr_na-c03523373-5&docLocale=

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• After updating firefox to 13.0, google does not work well, it means it loads very slow my requests or charge anything. How could I solve this problem?

  It happened after updating firefox to 13.0 to firefox 12.0 happened to me

  Please, reset preferences, cor - el has described - in particular network.http.keep - alive must have the value true.

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941