After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

Similar Questions

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I installed windows vista service pack 1 and now problems

  I installed windows vista service pack 1, and now it will not connect to the printer and I have no sound! I've updated the drivers of the two, and they work both according to their status of device but no sounds or printer connection. Help, please.

  Once solve you the problems with SP1, you can then start of SP2.

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948187

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  and - how to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

  Original title: start windows vista to the top of the page. (URGENT)

  My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

  Hi Antonio,.

  You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
  update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358/en-us

  Also see the KB article and check:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• No sound after installing Windows Vista SP2

  Vista service pack 2 and the loss of its

  Windows vista 32 bit
  I installed vista service pack 2 update and lost sound, I restored my computer to service pack 2 and sound istalling pre was there. I have re-installed now update sevice pack 2 and its missing again. It's the same with service pack 1 and I had to restore my computer to factory settings to retrieve the sound. I really don't want to have to do it again.
  I tried the microsoft fix that says everything is fine. I've done all the things suggested on troubleshooting audio from vista - still no sound. My internet explore keeps reloading when I don't have service pack 2 installed.
  What can I do to fix this?

  Like Nettie63, after SP2 has been installed, my sound on the left and the utility 'fix it' said everything of fine.  I tried the fix above with the research of STacSV64.exe that by pasting into the search bar.  However, he said that there was no file so I couldn't just double-click on it.

  What do you recommend?   Thank you very much.

  =====================================
  Have you tried all the suggestions in the following articles:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  (948491) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  (948465) information about Service Pack 2
  for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Loss of wireless signal after installing Windows Vista

  original title: sinal wireless

  I have an ibm lenovo t61 thinkpad. I just that had a windows vista back on until I did the wireless was working fine. now I got it back on the switch is, but the computer but the light on my computer will not on and I have wireless. It does not show anywere that I have the signal. can u help me

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  External wireless devices usually come with their own software and the driver which you should be able to download from the web site of the manufacture of wirelsss.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Re-installed Windows XP Media Center Edition and now I can't turn it on with my product key.

  I REINSTALL XP MEDIA CENTER EDITION

  AND I GOT A FEW SCRACHES ON DISK. SO I REPAIRED THE INSTALLATION WITH XP PRO. NOW I CAN'T ACTIVATE WINDOWS TO ALL THE... WHAT CAN I DO TO FIX THIS?

  original title: REINSTALLED XP MEDIA CENTER EDITION, HAD A GLITCH AND USED XP PRO FOR INSTALLATION of REPAIR, NOW I can NOT turn ON WINDOWS

  Upgrade installing XP Pro Media Center of in the Windows environment.  Just start the installation of XP Pro computer and then insert your Media Center CD in the CD-ROM drive and upgrade the installation, provide the Media Center product key when you are prompted.  If this fails, you will need to install from a flat folder, post again if the upgrade fails and we can give you the flat installation instructions.

  John

• After installing Windows 7 Service Pack 1, system now hangs or crashes when there is internet activity

  Hello.

  I installed service pack 1 for windows 7, but since I did that he keeps to crush/freezing when it is a lot of internet activity... I have no idea how solve this problem. Help, please!

  * original title - crash/computer freeze windows 7 pack 1 service *.

  You could start by updating your network drivers. See how you go after it.

  MyPcHealth - free tools

• Cannot install windows vista service pack 1 and 2 error: 8007006E

  Original title: Windows Service Pack 1 and 2 will be not updated

  I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

  Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
  How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
  Thank you!!!

  Hello

  1. can you install other windows updates?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 2:

   Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

  Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3