After intall Windows 8, pilots will be deleted. ??

Similar Questions

• After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

  Original title: start windows vista to the top of the page. (URGENT)

  My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

  Hi Antonio,.

  You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
  update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358/en-us

  Also see the KB article and check:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• Windows Update KB3841109 will not install

  After running windows update, update will download but not install.

  KB3841109 WINDOWS UPDATE IS NOT INSTALLED

  Hi Landerwr,

  ·         You receive an error message or error code?

  Follow the steps listed in the following article to resolve the problem:

  You cannot install some programs or updates

   http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.

  Original title: Win32/Small.CA

  I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.  I ran the security scan and the answer was "no viruses or malware found."  Could someone tell me how to deal with a Win32/Small.CA and how to determine if I really get it.  Thank you.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• After installation of Vista business, I have the folder Windows and Windows.0. Can I delete one of them?

  Dear Sir or Madam,
  After installation of Vista business, I have the folder Windows and Windows.0. Can I delete one of them? How can I check that I can delete to free up space. Windows folder takes GB 10.00 and file Windows.0 contains 26.3 GB. Thank you much in advance.

  Noppamas.k

  Mat9

  You can simply DELETE THE WINDOWS. O file if your computer is running norml:http://support.microsoft.com/kb/933212
  This will give you more space.

  If your computer does not correctly him follow these steps:

  The single was is to back up all you produce, programs, data, but does not back up the WINDOWS. O file. You can delete the folder before making the back-up. Back to the top of your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files

  On start-up MODE MINIMAL step #7 you want to make sure that DELETE you PARTITIONS
  It will give you an option and a list for delete you old partitions

  CLEAN BOOT

  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Officejet OfficeJet Pro 8600 Plus: Pro 8600 more will not scan from touchpad after updating Windows 10

  After a Windows 10 update, my printer will not touchpad analyze. It will scan the troubleshooting utility. I unplugged and reset without success. I have updated to the latest version of the HP software for the printer. What else can I try?

  Hello

  You can try to install from the link here:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/model/4323647

  Before installing the HP software above, please uninstall your previous version first.

  During installation, select the type of standard or recommended installation when you are prompted by the installation software. If you choose a minimum installation, read the description of each component software with caution to avoid the unintentional loss of functionality of the printer.

  You can check via "Control Panel" > "Hardware and sound"-> "Devices and printers"-> under "printers and faxes". There will be a green check mark is marked to your printer if it connected successfully.

  Hope this helps you.

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 1000 printer, model: J110a printer will not print after loading Windows 10

  After loading Windows 10 would not print my printer. I deleted the printer and HP all downloads for it and turn the computer off. Start the computer up, re-load the printer driver, plugged and tried a test page. I get a message in the lower right of the screen that says "file saved in the documents folder" and no page is printed.  I tried troubleshooting, but without success.

  Hey @Bandit64,

  Issue seems to be with the spooler, try the steps below and mark the port selected in the printer driver settings.

  If you use USB - selected port must be USB001 or DOT4

  If you use a network cable - selected port must be HP TCP/IP Standard.

  1. stop the spooler
  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right-click on print spooler and stop it.

  2 remove the files of spooling.
  a. click on my computer.
  b. go to C:\WINDOWS\system32\spool\PRINTERS\.
  c. remove all files in this folder.

  NOTE: If the spooler does not work properly, this folder must be empty when the machine is not printing. Normally, it removes these files in this folder after that they were sent to the printer. Delete blocked files can free the spooler and allow it to continue normal operation.

  3. restart the spooler.

  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right click on print and start spooler.

• Windows media center picture library is corrupted with thousands of photos? They will not delete

  Windows media center picture library is corrupted with thousands of photos? They will not delete what I can do?

  Windows media center picture library is corrupted with thousands of photos? They will not delete what I can do?

  WMC uses the same library of WMP. If you need to restore library WMP to solve the problem.

  Can not delete the songs from Windows Media Player

  Very same thing applies for photos too. Just follow the step by step procedures.

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Windows Mail will not delete e-mails unless I leave the foder and return

  Windows Mail will not delete e-mails unless I leave the foder and return. never had this happen before. I have another email

  accounts and they work fine.

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

• Windows Media Player will not play the .mp4 files after installation IE10 - BEX error message

  Hello! Recently, when I tried to read a file .mp4 on Windows Media Player, the player would immediately stop working and tell me that he could not play this type of file, even if the day before he could do so without any problem. I had an option to close the program or click to more information, so when I clicked for more information, he gave me this:
  Signature of the problem:
  Problem event name: BEX
  Application name: wmplayer.exe
  Application version: 12.0.7601.17514
  Application timestamp: 4ce7a485
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 00000000
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789
  Back to a system restore point previous fixed the problem and I could again play the files in Media Player, but during the night that Windows updates installed and the morning I could not play these .mp4 files once more. So I restored to a point earlier, changed my updates so that they are is more automatic and by installing each day at a time, I finally isolated the problem in Internet Explorer 10. If I install that, just Windows Media Player will not play these files.
  I tried a manual update of Internet Explorer 10, turn off all the options of toolbars shit and everything, thinking that when it automatically installs those who may be included, but that has not helped. Had to go back to my previous IE10 restore point. So no matter what, Internet Explorer 10 kills my ability to play .mp4 on Windows Media Player files.
  I don't have toolbars running on IE9 at all.
  I know that's obvious answer is 'do not install Internet Explorer 10' or if I do, download another player for .mp4 files. But the fact is, it shouldn't happen, it is indicative of something being wrong, and I would like TO be able to install Internet Explorer 10 AND use Windows Media Player to play these files. If someone else has had this problem, or know a way to fix it?
  Here are my system specs:
  Windows 7 Ultimate 64 bit
  Intel Core i5 - 3350P @ 3.10 GHz CPU
  ASRock H77M LGA 1155 motherboard
  8 GB DDR3 240 - Pin SD RAM
  Diamond Radeon HD 7870PE52GV 7870 GHz video card
  And all my programs are installed on this:
  SAMSUNG series Pro 840 MZ-7PD256BW 2.5 "256GB SATA III MLC internal Solid State Drive
  I'd appreciate any help you can provide! Thank you!!

  See http://support.microsoft.com/kb/2670838

   

  It sounds like your question. I think you should uninstall this update and

  hide and see if that solves your problem. Please report.

   

   

  Barb

   

  MVP - Windows/entertainment and connected home

   

  http://digitalmediaphile.com/

   

  Please mark as answer if that answers your question

   

   

   

   

  I tried myself after experiencing the same problem and error code. I uninstalled the KB2670838 update, and then my Windows Media Player finally worked again. I also found that IE 10 must be uninstalled as well. Installation of IE 10 also automatically installs the update of KB2670838 platform. After uninstalling KB2670838, IE 10 automatically uninstall with it, better you hide two updates so that they do not install again. From the link in the previous post, I learned that the platform update is having problems of conflict with the AMD drivers. Good luck to you and hope this helps.

• can $WIN_NT$. ~ BT be deleted safely after installing Windows 7 on Windows XP MCE

  I can't delete a choice of unwanted startup after installing windows 7.  Easy BCD locates the file as a legacy, but I can't edit it or search for the file. I removed XP media center edition but the $WIN_NT$ ~ BT file remains.

  $win_nt$. BT is the location of storage and temporary files, installation files.

  Have a look at http://support.microsoft.com/kb/823598