After KitKat updated for HP Slate6 SD card is no longer detected by my programms

Hello

I was also forced to update my tab HP Slate 6 voice yesterday.

After the complete procedure and restarting, my program is no longer detect the SD card!

HP file manager said: "If von Lavaggio im Android OS kann der HP File Manager nicht mehr auf external applied schreiben" ("due to changes in the Android operating system, HP file Manager can no longer write to devices external storae").

Please help solve the problem, my programs need to use external storage.

I tried the following: I uninstalled one of my programs and reinstalled again, but the program still does not detect the SD card.

I can't play music or listen to audiobooks more (via MortPlayer), cannot navigate with local stored map (via CoPilot - poor gps also).

plS helP!

Hey Slate6user,

Here are the downloads of image for your Tablet: HP Slate 6 6000en VoiceTab drivers.

As you can see there are a few different downloads. They vary by region in order to ensure that you select the correct version depending on the location, in that the tablet was bought.

Restoration of good luck!

Tags: HP Tablets

Similar Questions

  • After the update for 13.7.1, R3D files no longer - work HELP!

    Our workflow requires working directly with .r3d files in Premiere and After Effects.  Since the update to the latest version of After Effects, we cannot import these files or even use them in projects that were imported.  Previously imported files appear to be missing content (AE infamous color bars).  Help!

    After Effects 13.7.1

    Mac OS X 10.11.3

    iMac (retina 5 k, 27 inches, end of 2014) and other Mac as well from MacBook Pro MacPro 2013 2014

    All the best,

    David Henson

    Director of Post Production

    Invodo, Inc..

    [personal information by moderator - please do not post your e-mail address on a public forum]

    This bug is fixed in the update after effects CC 2015 (13.7.2): http://adobe.ly/1WaV0pP

    This only bug fixes Update corrections occurred after effects CC 2015 (13.7.1) on Mac OS x files: RED (.r3d) can still be imported and are not reported as missing in existing projects.

    This update is only for Mac OS X and is not available for Windows, because the bug with the RED files does not occur under Windows. The most recent update for After Effects on Windows is after effects CC 2015 (13.7.1).

  • Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

    Drivers Vista MSN

    Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

    Hello

    Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

    One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

    If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

    Here's how to uninstall specific updates;

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

    See you soon.

    p.s. Always get the latest updates of the driver from the hardware manufacturer.

    Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

    http://www.brother-USA.com/downloads/default.aspx

  • Horrible framerate after Windows Update for NVIDIA GeForce 7150 M

    I started getting a horrible frame rate in games after receiving an update for my NVIDIA GeForce 7150 M / nForce 630M graphics card from Windows Update. For example, in World of Warcraft before the update, the pace has been a constant 25 fps, and now he fell up to 2 fps. I tried to do a restore of the system several times, but it keeps saying there is a problem that prevented the restoration of complete successfully. Is there a way to fix this?
    My information system is the following:

    HP Pavilion Entertainment PC
    model: dv6812nr
    OS: Microsoft Windows Vista Home Premium
    Version: 6.0.6001 SP1 build 6001
    Manufacturer: Hewlett-Packard
    Processor: AMD Turion 64 x 2 TL-60, 2 hearts
    Total RAM: 2.87 GB

    On a side note, I did a check of the hard drive through the BIOS and it came with an error code (#18000) saying to replace the hard drive. Not sure if it could be linked to the hard drive read/write speeds, but thought I would mention it.

    Thanks in advance for the help,

    Tyler

    NVIDIA provides drivers for laptop graphics cards.  They leave this task up to the OEM.  If you want to try the new Nvidia drivers, laptopvideo2go.com has a few guides and how to install the most recent drivers on laptops such as yours.  I suggest trying some news to see if those to improve your display rate, that HP may have updated Nvidia drivers listed on their website.

    See you soon,.
    --
    Kelex
  • Sony xperia L hangs after software update for 15.3.A.0.26

    I've updated my Sony Xperia L C2104 yesterday to 15.3.A.0.26. Now, since today in the evening after an update through Google game store, Google + and chrome keep crashing and force the phone to reboot. The phone is not actually restart completely, but the screen shuts down for a few seconds, then it shows the loading screen, as when we turn on the phone, and then the screen lights up again in lock screen mode.

    I tried to restart the phone in safe mode, but that doesn't happen too. I also removed the battery, sim card and memory card and put it back again but the phone is facing the same problem.

    Update Service (SUS)

    PC Companion (CCP)

    Bridge (for Mac)

    Alternatives on how to backup Xperias

    http://talk.sonymobile.com/thread/36355

  • unusual warm-up and drainage of battery fast after the update for sierra

    everyone knows unusual warm up their MacBook pro and the draining of battery faster after the update to Mac OS sierra?

    my MacBook 2015 mid pro gets hot when I close the screen and put it to sleep, as well as drainage of battery faster than usual. everyone knows the same?

    Try to use the activity monitor to see where will your battery life.

    1. go to the docking station
    2. Click on finder
    3. Click the menu go
    4. Choose utility
    5. Double-click activity monitor
    6. Click the stack tab

    See you using your battery?

  • System hangs after installing UPDATE for Windows XP (KB955759)

    Update for Windows XP (KB955759) installed on my system without problems. Once the system reboots and the Office rises, the system hangs.

    Are there any known issues or fixes for this?

    The system is XP Pro SP3

    Thank you!

    Run the 'unsubscribe' Fix It (left hand) on this page and you do not need KB955759: http://support.microsoft.com/kb/954157

  • After having updated for Windows 10, if I try Sava a file in TIFF format, it will not save and Photoshop freezes. Is this a known problem and is at - it a cure please?

    After having updated to Windows 10. If I try to save a file in TIFF format, it will not save and Photoshop CS6 freezes. This is a known fault and is at - it a cure please?

    • Please would the ' Save in the background ' option and check if this helps you in any way. "
    • To activate this option, choose Preferences > file management and save in the background check
    • If this does not help, try to reset the Photoshop preferences after the bottom of the article:

    Using Photoshop | Preferences

    PS: Restart Photoshop when you make changes in the preferences.

    ~ Sarika

  • Last updated for IOS 9.2, iCould Backup no longer works. Help, please!

    Recently updated for IOS 9.2, now my iCould plu backup works. Help, please! I desperately need free up space on my phone.  I click 'NTI Backup Now' and after 10 minutes of inactivity, I get a message enter my login iCould on my phone, (is the correct/PW username I use every time), but the following message appears: "verification failure: there was a connection to the Apple ID server error.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

    Trying to backup using iTunes, take a look at this Apple Support article:

    https://support.Apple.com/en-us/HT203977

  • HP LaserJet 4250: Brick HP LaserJet 4250 after firmware update failed. Compact Flash card recovery options?

    While performing an update of firmware via FTP using cURL, the HP LaserJet 4250 I worked has frozen. I had no choice but to cycle the power and hope for the best, but unfortunately it was bricked. The screen no longer lights upward when turned on (although I can hear the internal working mechanisms which is a good sign).

    While doing some research, I read it is possible to buy a 32 MB CompactFlash card with preloaded firmware (http://bit.ly/1BTZGCh), put the jumper pin on the logic board to boot from it and then re-flashing the firmware on the card. Looks like a foolproof solution, but I would like to save my company some money if possible.

    I was wondering if it is possible to use a Type I, 128 MB Compact Flash card I have handy and load the firmware above myself using a USB Compact Flash card reader/writer. Judging by what I read on another post on the forum (http://bit.ly/1GR6nM7), it seems possible to use a Unix/Linux utility such as JJ to clone another job Compact Flash card with preloaded firmware. However, I don't have such a card to clone. What I have is another HP LaserJet 4250 in working condition.

    So that raises the question, is it possible to insert my own blank Compact Flash card in a HP LaserJet 4250 work and copy the firmware the logic board to the map image by using the printer control panel? I guess it would be the only way, if necessary, to get the firmware on the card.

    However, if she is not the only way, is there an easier way to get the firmware on the card? For example, can I just format the card in FAT32 and copy the file to the RFU firmware to it and start the printer from him? Or the use of HP does it's own file system that is not readable on a PC? Also, would it be possible to use dd and simply copy the RFU directly on the card device believed himself (no file system) and boot from that?

    Sorry for the barrage of questions. I tried to find the answers to all these myself, but HP doesn't seem to provide a lot of detailed documentation on works of the firmware via Compact Flash process. I'd be very happy if someone with experience could provide the answers well! Thank you.

    Looks like I'll be solving my own number here haha. So after bit peicing together information from different positions and some experiences, I managed to save my LaserJet bricks!

    To fix a HP LaserJet 4250 bricks, two things are necessary: an of Type I CompactFlash card and other HP LaserJet 4250 work. It's a common printer, chances are you'll find another around the office.

    Here are the steps to fix the printer:

    1. The card CompactFlash Slot 1 (bottom slot) on board the logical work printer. Instructions on how to do so are provided by HP here: http://bit.ly/1NNyIol
    2. (May be optional) Initialize (format) the CompactFlash card by following the instructions on page 327 of the repair of HP LaserJet 4250 (http://bit.ly/1D22T7R)

      (a) turn off the power to the printer.
      (b) turn on the power to the printer and then press and hold the MENU button when begins the memory count.
      (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
      (d) press the BACK ARROW button. The display should INITIALIZE the DISK.
      (e) press Select (mark). The printer initializes the hard drive and continues its power on sequence.

    3. Now that the CompactFlash card is formatted, it is time to copy the NAND of the printer to work on the CompactFlash card.

      (a) turn off the power to the printer.
      (b) turn on the power to the printer and then press and hold CANCEL when begins the memory count.


    (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
    (d) press the SELECT button (check mark).
    (e) press the MENU button.
    (f) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
    (g) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to NAND.
    (e) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to SLOT1.
    (f) press SELECT. The copy process must begin, and the status will appear on the screen.
    (g) once the process is complete, turn the printer off and remove the CompactFlash card.
  • Now that we have a working NAND on the CompactFlash card, it's time to restore to our printer masoned. Perform the following steps on the printer of bricks.

    (a) turn off the power to the printer.
    (b) Insert the CompactFlash card into Slot 1.
    (c) set the jumper on the System Board on the arrow to start from the CompactFlash card.
    (d) turn on the power to the printer and then press and hold CANCEL when begins the memory count.
    (e) continue now the button until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
    (f) press SELECT (checkmark).
    (g) press the MENU button.
    (h) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
    (i) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to SLOT1.
    (j) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to NAND.
    (k) press SELECT. The copy process must begin, and the status will appear on the screen.
    (l) once the process is complete, turn off the printer, remove the CompactFlash card and reposition the jumper to the default position.
    (m) turn on the power to the printer. That's all! Everything should work normally again. No brick no more!

  • UPDATE (07/04/15): IF YOU DO NOT HAVE ANOTHER HP LASERJET 4250

    It turns out that you can just download the firmware on HP website and create an image of it bootable on a CompactFlash card. However, it is not as simple as just copying the firmware image. You should ignore the 633 first bytes of the file of the firmware (at least with the 08.260.1 version), then copy the rest on a CompactFlash card. You can accomplish this by running the following command on Mac OS X or Linux. Download and boot from a live CD of Linux like Ubuntu if necessary.

    DD if = lj4240_4250_4350fw_08.260.1.rfu ibs = 1 skip = 633 of = / dev/disk2

    Replace "lj4240_4250_4350fw_08.260.1.rfu" with the name of the appropriate firmware file and ' / dev/disk2 ' with the appropriate device if necessary.

    If you prefer, a bootable copy of the revision of the 08.260.1 firmware can be downloaded here: http://bit.ly/1FeF3YP

    As you can see in the image below, when opened with a hex editor, image downloaded from HP firmware starts with 1 b 25 31 2d bytes... However, the printer does not include the first part of the file when you start, because there are instructions of PJL and not binary. Bootable image begins at 631 byte (277 hex) highlighted. It may be possible that this address may change in future versions of firmware or for different printers, so here's how to know where to start the startup code. The first occurrence of 00 00 04 24 bytes, is where that starts. In ASCII, it looks to "... $". In this sequence, the 00 first is the beginning of the startup code. Here's another picture, of what should look like a bootable firmware image.

    Non-bootable firmware image, downloaded directly from HP

    Bootable firmware image, extracted of HP download

    For fun, I unpacked it some of the files included in the firmware image, and it turns out that tracks on the printer to LynxOS. Who would have thought?

  • Do not get kitkat update for place 7

    Bought a place 7. When I connected to the internet, sign up with google, Dell and all, I don't get always updated Kitkat. Am I missing measures? Or it will take time (perhaps days) to get it?

    Consider yourself lucky, got the update, he has destroyed the stability and ease of use of my compressed Dell, will not remain for more then 30-60 minutes.   Suggested this after several factory resets.

    Stay with 4.3 makes usable, wish I could go back

    Gary

  • ACR stop working after software update for Radeon

    I have a card Radeon R9 270 and CC Phoshop/Lightroom.  Everything worked very well. Then, I received a software update from ATI and accepted the installation to version 015.041.000.000. When I opened PhotoshopCC, a pop-up said that I had to enable GPU for ACR. I checked the box and opened a RAW file. ACR window open and I clicked the Open button. He locks up Photoshop. I had to stop the PS with the Task Manager. When I opened LightroomCC, the GPU box has been checked if I tried to use it. the first image open, but when I tried to click on another image, it froze and I had to close it with the Task Manager. I then disabled GPU in PS and it works fine. Given that Lightroom is just a front end for the cab, the develop module will not work and lightroom just freezes.

    I asked s ATI of instructions on how to revert to the prior software, but have not heard of them. I can not so much through the Device Manager because the revert button is grayed out.

    A quick search returns: Lightroom CC crashes after updating the Radeon driver

  • Pavilion G6 1304SM: not updated for Win10, AMD graphics card causes serious productivity issues

    Hello.

    I bought my laptop around August 2012. A week ago I updated my computer laptop Windows 10 x 64 to Windows 7 x 64 operating system. Then I did a clean install of Windows.

    I got almost all the driver through Windows Update software. However, the driver for my graphics (Intel HD 3000 + AMD Radeon HD M 7450), I received is defective.

    In Device Manager, the AMD graphics card is referred to as "AMD Radeon HD 7000 series" instead of "AMD Radeon HD M 7450" (the way he recalled on Windows 7).

    On the site Web of the product on hp.com, where I used to see a large list of all downloadable drivers, specially designed for this computer, HP only pasted a label reading "Windows 10 drivers can be downloaded via Windows Update."

    Running in graphical mode fixed, AMD is shown with a yellow exclamation point in Device Manager (I tried to update, but it says I have the latest version). I can't disable the Intel card, otherwise I'm stuck with a resolution of 800 x 600.

    In dynamic mode (the one I'm used to working on), I used to set which application uses what GPU via the Catalyst Control Center. However, now when I do that, if an application is set to run under AMD GPU, it never starts. (It will allocate about 30 MB in RAM - visible via the Task Manager - but will not open the main window). If I change the GPU to Intel, the slopes of the app, but under limited return capabilities.

    I use extensively chart AMD. Not being is not able to use it causes problems of great productivity for me. Are there possible solutions for me, not to mention that roll back to Windows 7?

    Hello @tbc3434,

    Welcome to the Forums of HP Support!

    I read your post on the switchable graphics and wanted to help you!

    You can try to download graphics drivers for Windows 7/8.  If you're still having problems, then you can opt to go back to a previous generation option, in your system settings:

    HP Notebook PC - upgrade to Windows 10

    Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on upgrading Windows 10 until the drivers can be updated.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • ReadyCloud App Destop - device is in offline mode after the update for today

    Hello

    Today (2016-10-19) the app told me to update. After updating the application, it is always connect to my NAS at home (NAS ID is shown), but tells me that the SIN is in offline mode.

    When it is remote to connect to my PC at home I can confirm ist NAS, running and shown in the local network. But even the local installed desktop app told me, that the SIN is on, but offline!

    NAS is already rebbotet; App has been transformed into market. No change.

    Did I already mention Netgears updates are made to the nightmare? :-/

    Thank you

    Christian

    Hi tkernaghan,

    Sorry for the inconvenience.

    But it is not necessary to re - establish additional folders to synchronize on your box and the PC. Please follow the steps below:

    1. uninstall the incorrect version of the ReadyCloud desktop application;

    2 download the right version on readycloud.netgear.com;

    3. install the version that is appropriate;

    4 remove this file from your computer:
    On MAC: Deleting the file / users / [logged in user] / Library/Application Support/ReadyCLOUD/ReadyCLOUD.pkg.version
    On windows: delete this file C:\Users\[logged in]\AppData\Local\Temp\ReadyCloudSetup.exe

    All folders that you have previously synchronized would still be there after you install the correct version. No need to configure the synchronization again.

    Thank you

  • After the update for tvOS 9.1, it cannot play Live Video Streams from the start, Breaking NHL Gamecenter Live

    Since tvOS 9.1, update when I try to play an ongoing game from the beginning, using the NHL Gamecenter Live application, it will start playing for a second and then jump to live.  Basically, it breaks the app for the way I use it.  You can save 10 seconds each time, and he will play where leave you, but if interrupt you or try to fast forward / rewind it leap backward to live again.

    Jumping to living like that can easily spoil a game showing you the advance score.  In addition, it allows me to watch a game that has already started overnight since I don't want to miss the beginning of the game and can not start from the beginning to the end of the stream.

    I contacted NHL Gamecenter Live about this and they made it the Apple TV update:

    "At this time, the new Apple TV update does not support advance fast/quick return characteristic of live broadcasts."

    Does anyone know of a way around this, or if this is a bug or design?  If it's normal then Apple has actually ruined my Apple TV after only a few weeks of use.  I really hope that's not the case.

    Has anyone else noticed this problem?  I can't find any discussion about this but it seems like a pretty major flaw for me.

    Thank you!

    Scott

    I accidentally tag this message with iOS 9.1, it had to be tvOS 9.1.  Sorry about that!

Maybe you are looking for