After locking Portege Z930-E7S loses connection Wi - Fi

Similar Questions

• Portege Z930 - 14L + Dynadock U3 crashes after a few minutes of use

  Dynadock freeze, after a few minutes using or when I play the movie on youtube in a few seconds.
  Laptop works fine now, but the display through dynadock solidifies (freezes and the picture will become.) Its stil game.

  Toshiba Portege Z930 - 14L, Toshiba Dynadock U3
  Both aged two weeks. Coercive power disconnect on dynadock and display of the restoration.

  I have test the driver cd, driver of site Web of Toshiba and last pilot displaylink official sites.

  Hello

  What USB port to connect the Dynadock U3 device did you use?
  Have you tested the Dynadock U3 as part of different USB ports?

  AFAIK the Z930 Portege - 14L supports a USB 3.0 port on the right side and two USB 2.0 ports on the back.

• Portege Z930: Loss of Fn keys after upgrade to win 8 - can't turn WiFi switch

  After several months waiting for my hour I just began my Portege Z930 - 11G for Windows 8 Pro upgrade.

  To a large extent, it went to the plan except that, after execution to display the Assistant Toshiba Upgrade I lost the Fn key and about half of the keys no longer seem to work at all.

  The only key I've ever used on a routine basis is the Fn + F8 option to activate the power switch WiFi.

  So now, I can not turn on WiFi on the computer.

  It must, surely, that there be a way to do it, but I'm not. Does anyone have a suggestion? I'm OK for now because I have a local cable system in the House, but once I get out on the road I will fight without WiFi.

  Before running the wizard upgrade of the Fn key grew up the key appear in the upper part of the screen and I want to surely I had turned on WiFi right here.

  The Fn key utility offers very little control of the Fn keys. It does not offer the possibility to do anything else than to disable five notifications screen for keyboard backlighting, power plan, touch pad and cursor overlay digital overlay.

  Any help gratefully received.

  Andrew

  > So now I can not turn on WiFi on the computer.
  First of all, you can enable and disable the WiFi using the function key, but you can also activate the WLan settings of Windows 8
  Key Win + C-> settings-> change PC settings-> wireless

  Now, you can use the cursor to wireless devices to enable or disable the WiFi network.

  But to get the FN button work you need to install the + Toshiba function key + Utility for win 8 and + Toshiba system driver + to win 8

• Portege Z930 - 14q need much time to connect to D-link DIR-3000 via the LAN

  on the computer Portege Z930 - 14q with the router mentioned above, it takes a long time for the laptop recognize the network and connect (sometimes not completely).

  No idea why this is so?

  Do you use the preinstalled original Win7 PROFESSIONAL 64 bit and factory settings?
  Have you noticed the same behavior when you try to connect your laptop to another router?

  Is there a difference when using the outlet to power supply or battery?

• Portege Z930: How to create GPRS / Wifi / LAN connection profiles?

  Hello!

  I can't find any software (Toshiba or Intel) on my Portege Z930 that allows to manage
  profiles of connections to be automatically connected GPRS or Wifi or LAN regardless of connections available (office, home, public area...)

  Toshiba Wirelss manager works with GPRS only and no wifi or lan

  Thanks for your help!

  Best regards

  Hello

  Such universal utility does not for me.

  Toshiba Wireless manager manages the profiles of 3G.

  Management profile and Wlan connectivity, you can use the TOSHIBA Configfree
  Here are some details:
  http://forums.Toshiba.com/T5/general-features-knowledge-base/Toshiba-ConfigFree-utilities/Ta-p/347098

  Well and LAN would work until the network cable is connected :)

• Audio choppy and distorted on Portege Z930 after update of Win7 for Win8 64

  I just wanted to share a tip with you that cost me some time to work, about the sound reproduction of a Portege Z930.

  When I got my new Z930 - 14L, he was running Win7.
  I tried everything like you do when you get a new machine and it worked fine - including the audio playback.

  When I updated for Win8-64 since the CD that came with the computer, everything still seemed to work very well and I had not changed any driver or Setup.

  However, after a few minutes, the linenn of audio playback. It choppy, distorted, interrupted, stuttering and I was shocked.

  Oddly enough, as soon as I turned my attention to the computer again, reading was OK again - but no screen saver came and no power saving mode has come in so little time. I knew that this was no hardware problem (because it worked in Win7), it was not a driver problem (because the first 5 minutes, the sound was pristine), he was not a ground loop, (as many have suggested) because it sounds differently.

  Thanks to another forum, I discovered that it is actually the combination of Windows Defender, Win8-64 Pro and the audio driver that causes this. If the device is idle for a few minutes, the Defender thinks it's a good idea to use idle time to scan the SSD - causing interference with audio playback. Of course, you cannot simply disable or stop the central antivirus process, that would ruin some the whole point. :-)

  _So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! _ it's probably the only time where the installation of an antivirus suite SOLVES a problem. :-)

  BTW, this is not probably limited to this antivirus product, simply play a bit with the Defender.

  Best, Yuppie

  > Then I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! It's probably the only time where the installation of an antivirus suite SOLVES a problem.

  Thank you much for sharing this details here in the community.
  I guess that the information could be useful for others who have these problems of his fellow men.

• Portege Z930-118 does not start after the BIOS update

  My PORTEGE Z930-118 failover and wont start after I upgrade in the middle of the upgrade I remove power, then press stop down after I see the power and wireless but the screen stays black?

  Any help please

  In this case the EPROM has to be reflashed once more using crisis disk BIOS.
  Usually this must be done by authorized maker Toshiba. But of course this will be possible only if the EPROM module has not been too bad.

  What to say: try procedure (link above) posted by Bob. In which case it will not work, ASP is your next contact point.

  Good luck

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• VM loses connectivity after a reboot... help!

  I'm lost on this one, I've NEVER seen this problem before.

  The server is an HP DL380 G5 with two 1 GB network adapters. Running ESXi 5.0 (with all updates) one comes from ISP and we're going on the local network (server is mail, NAT and much more).

  After a reboot, the NETWORK card that comes from the ISP, loses connectivity, more often. It will be the Web sites (I guess that's the port open on the firewall) but nothing else. No internet, no. DNS, I can't even ping an external site by its IP. The only thing that works is the Web sites that are currently running. We use this connection for Web sites and Internet for the site so using NAT gives him around our PC, it is important that it works.

  The ONLY way to recover is to remove TWO cards from the network card in Windows and let Windows find their new (drivers). I got this server and copied down to older hardware, and never, it has a problem after a reboot and works with a number. On ESXi 5, even after fixation by the removal of the NETWORK adapter cards, once it gets restarted, I have to start all over again.

  I need to pass to the virtual machine, but so far it has been nothing but a nightmare.

  It is material or ESX that causes this problem, I don't know it's not on Windows server 2003 that they run...

  Any ideas? Please help if you can.

  The problem seems to be what I was suspecting, a routing problem internal VM. I thought you lost the 0.0.0.0 route to the internet, but instead, you actually get an another 0.0.0.0 route that points to the local interface. The route print output:

  Work:

  0.0.0.0          0.0.0.0       < isp="" gateway="">      <   isp ="" ip="">     10

  Does not:

  0.0.0.0          0.0.0.0       < isp="" gateway="">      <   isp ="" ip="">     10

  0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.1 10

  192.168.0.1 is the local IP address of the internal NETWORK adapter in your virtual machine. This means that for some reason, sees itself as the default gateway and also not trying to access the internet through your ISP router.

  If you look at the text notworking ipconfig/all command, you will see that the 'card Ethernet Local Area Connection 4' with the 192.168.0.1 IP itself now has as a default gateway.

  The LAN4 configuration is static, so it's quite strange where the new default gateway information comes. A quick fix after a reboot is likely to open the TCP/IP settings and remove the new default gateway of the interal NIC

  You could also enter a new route persistent to the ISP router with the metric is lower, but I think that we should first try to find out why your Windows 2003 establishes a default gateway on the internal interface.

• Portege Z930: How to install Win 7 after the installation of Win 8

  Hallo!

  There are a few weeks upgraded Toshiba Portege Z930 to Windows 8. Before the upgrade made the backup of Windows 7 on USB flash and it worked. Now recovering Win8 to Win7... Recovery starts fine - choose 'out of box' recovery and get ERROR 05-0172-0001.

  How to return to Windows 7?

  Hello

  I guess that your BIOS contains the option to switch between the UEFI and BIOS of the CSM.
  It must therefore return to the CSM BIOS and must disable secure boot if it has been previously activated.

  Then you can reinstall Win 7

• Portege Z930: How to keep the battery alive as long as possible?

  Hello

  Got a Portege Z930 recently, I do not know how to manage the recharge of the battery in order to maintain 'live' as long as possible.

  I'm mainly using computer at home, to leave the battery and then recharge, but I'm not sure it's a good idea. I had an A-200 before satellite, also use it at home and keep connected all the time; After a few years, the battery capacity decreases

  Thanks in advance.

  Hello

  > after a few years, the battery capacity decreases

  It's nothing unusual after a few years of any battery would start to lose performance.
  Generally speaking after 500 times charge cycles the battery begins to lose clean performance.

  Of course you can remove the battery and could use the laptop only connected to the power adapter, but in this case, the laptop would shut down when making connection interrupted.

  To extend the battery work, you will need to calibrate the battery from time to time.
  To calibrate the battery, you must discharge the battery until it is completely empty. Then connect the power adapter and charge the battery up to full charge. Repeat this procedure two or three times in the line.

  Greetings.

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• the magic mouse 2 loses connection

  My magic mouse 2 is loaded (88%) and connected via bluetooth to my macbook pro (late 2011, OS X El Capitan 10.11.4).) Sometimes it loses connection and after a short time reconnects, what should I do for him have always connected, I mean without capricious disconnections?

  Hello heide1,

  Thank you for using communities Support from Apple!

  I understand that your Magic Mouse 2 going through temporary disconnects and stops responding intermittently. We know that situations of this kind can be frustrating, but we are here to help.

  To begin troubleshooting, I suggest to read and work through the steps in the following article.

  Your mouse or your keyboard intermittently not responding

  Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

  Click or press a key

  • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

  Search for interference of signals

  • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
  • Keep devices wireless to 10 meters (30 feet) of your Mac.
  • Avoid putting metal objects between your wireless device and your Mac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  See you soon!

• Portege Z930 - 12 H - update of the BIOS and McAfee Endpoint Encryption?

  The update to the latest BIOS (Ver.6.70) for my laptop Portege Z930 12 H comes with the warning:

  «If you use the BitLocker Windows Drive encryption, please temporarily suspend (or turn off) before BitLocker Drive Encryption updated BIOS.»

  The same caveat applies to McAfee Endpoint Encryption, which is used on my laptop and I can * not * pause or stop? Or can I apply the upgrade of the BIOS safely?

  Thank you.

  As much I know Bitlocker isn't related to Antivirus from McAfee software and two security tools are not connected to each other. BitLocker is a tool for Microsoft Windows and McAfee is a 3rd party software preinstallation on the device.

  I found a nice how doc on the update of the BIOS.

  [How to upgrade the BIOS on Toshiba laptops | http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm]