After new udates, all the color going on in black and white!

So I woke up this morning and got on the computer. It was presented that a windows update happened from one day to the next, because I was at the login screen. So I connect, and everything is fine, when all of a sudden while the office, all colors become black and white.

I have tried everything I can think off - play with the monitor and by connecting them connected. I went into the control panel and tinkered with nvidia display stuff. Nothing.

Finally, I downloaded and installed the latest driver for my graphics card. As it has been installed the drivers, the color came back on. When he did the installation of the drivers and tried to restart the computer, everything is black and white again.

So I restarted the computer, and has obtained the connection - color was on. I have connect and see that the Office had the color, and then after like 2 seconds, he returned black and white.

Gaaaahh! Anyone know what hell I have to do?

Hello

It could be a question to reset some settings in the office. We can also make sure that. for some strange reason, your display settings to high contrast were not lit.
Try this: press > left ALT + left SHIFT + PRTSCN
This should start the high contrast display, settings that are in black and white by default.
Manual way that there are keys didn't do.
Click on start and open Control Panel. Under access, click "optimize visual display".
Make sure it is turned off.
Please let me know if it was her.

Mark <> Microsoft Partner

Tags: Windows

Similar Questions

  • Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't my text color is similar to that of the sheet (the color is spotted with black and white noise)

    ABM Verso - Copie test.png

    Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't the color of my text to be the same as in the worksheet (color is spotted with black and white noise) as you can see...

    Add a new layer above your text. Fill it with 50% gray. Add a bit of noise:

    Set the blending mode to lighten:

    Add a Gaussian blur to match the other text:

    Usage levels to set the contrast:

  • Hello! Can someone tell me how to select the two scenes of an existing project and color correct them in black and white exactly please?

    Hello! Can someone help me please? I'm learning just on Final Cut Pro and I have a family movie finished, edited by a professional editor years ago but I need to move from the stage two very bright red (shot on film light of day and used inside) only black and white. Whenever I select the specific images to change black and white selects the entire movie instead. Can someone help me please? Thank you, Tony

    Very fast: select, type command-6 to open the accelerator card and bring the Saturation all the way down.

  • change pdf or text color change photo in black and white

    Can I change a text color change the image or pdf in black and white? It cannot be put into iPhoto.

    You can in GraphicConverter 9. Not sure about other graphics programs.

  • HP officejet pro 8500 a910 does give me the option of printing in black and white

    Hello

    My hp officejet pro 8500 a910 does give me the option of printing in black and white. How choose to print in B & W when the option does not appear under properties?

    Thank you.

    Hello

    Used to print application, click file > print

    Click Properties or preferences to access the Printing Preferences dialog box.

    Click the Advanced Options button at the bottom of the window.

    According to the characteristics of the printer, click on the area of selection of printing in grayscale and as high-quality grayscale or black ink only.

  • My HP photosmart 6510e all-in-one scanning pictures in black and white but the docs are still in color.

    Scan pictures into my a6683w HP Vista in black and white, but the documents still scan in color.

    Hello there ingridt, welcome to the Forums!

    I noticed your post on the scans of your Photosmart 6510, scan to your system from Vista in black and white. I want to offer my suggestions to you to see if they can help you with this.

    First of all, try to launch the HP print and Scan Doctor who is used to fix the printing and scanning problems. You choose the option "Scanning" when the tool is run. It will inform you if the software is completely installed, or if there is a problem, it can not correct. If it detects an error and shows you a red 'X', I suggest then uninstall and reinstall.

    Here are some links to help with uninstalling and reinstalling if you happen to do these steps.

    1. uninstalling the printer software

    2. restart your PC

    3 reinstall: Photosmart HP 6510 e-All-in-One Printer - B211a

    Try a scan now and let me know how make you out!

    Good luck!

  • LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

    I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

    Hi @la1959,

    Welcome to the HP Forums!

    I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

    According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

    Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

  • Replace the empty ink cartride color to print in black and white on C7280

    Photosmart C7280 printer gets the error message O > c18a0306 and cannot print.  Study found more than clear cyan ink is empty (which in itself is incredible that very rarely colorprint). As I only need bo black and white printing is there a way to bypass this error message so I can continue printing in black & white?

    I don't think so.  The C7280 has permanent print heads which are not replaceable.  To avoid irreversible damage to the print heads, the pritner requires in all colors (and black) ink for printing.

    The here document includes information about using ink in HP (and other manufacturers) inkjet printers.  In the language of this document, the C7280 is an IIC printer.

  • All-in-one HP Deskjet 2540: How do I set the default to print in black and white only

    The manual says this, but it applies to a PC and I have a Mac:

    "If you want to print a black and white document using a black ink only, click on the Advanced button. Printing from the drop in grayscale, select black ink only, and then click OK. »

    Someone knows how to set the printer to print only black & white for a Mac?

    As an accompaniment, there are security settings that must be configured to reduce the risk of access remotely for the printing device?

    Thank you

    Hello
    Follow the steps below to print using black ink only:

    1. from the application used to print, click the file menu and select print.  The print window is displayed.
    NOTE: The print window might be minimized: click Show details to display all available parameters.

    2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    3. Select Type/quality paper in the menu dropdown.

    4. click the triangle next to color Options of spending parameters.

    5. set the color to grayscale field.

    6. set the Mode to grayscale in black cartridge only.

    You can save the settings for later use by clicking preset > save current settings as preset... Once you print using the saved preset will remain by default up to what we will choose another preset.

  • HP officejet pro 8500 a910 does give me the option of printing in black and white on a mac.

    I would like to create a new preset using black and white or grayscale for an a910 8500 but it doesn't seem to be a way to specify black and white or grayscale in the dialog box print when printing from an application. Also, when I go to the presets dialog show I can't change all the settings for a custom preset.

    very confusing dialog boxes. It doesn't seem to be a way to access the dialog box presets without being in a print in an application dialog box.

    I'm running OS X 10.7.3

    Argh!

    Hello

    Follow the steps below to print using black ink only:

    1. from the application used to print, click the file menu and select print. The print window is displayed.
    NOTE: The print window might be minimized: click Show details to display all available parameters.

    2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    3. Select Paper Type/quality in the menu dropdown.

    4. click on the triangle next to color Options to the settings.

    5. set the color to Grayscalefield.

    6. adjust the Grayscale in Black cartridge only.

    You can save the settings for later use by clicking preset > save current settings as preset.

    Kind regards

    Shlomi

  • My color scheme changes in black and white, but preferences continue to it's normal color.

    On computer start everything seems fine and in color until the login screen. Often there's color for a few moments, but before I'm even able to enter my password of connection the regime change in black and white and stays that way. Sometimes in re-opening a session, it goes through the same process, but the computer remains very rarely in color.

    Nothing specific seems to have changed this problem started by chance and it worsened slowly more often remain black and white.


    I don't know what I can do to sort this problem, thank you for your time.

    Hello Acantor,

    ·         You have the latest drivers installed for your video card?

    I suggest that you go to your computer manufactuers website and download the latest drivers for your video card.

    See this article which will give you different options to upgrade the drivers:

    http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

    If nothing works, try to uninstall and reinstall the graphics card.

    ========================

    1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
    2. expand "Graphics cards", double-click the entry to the display device.
    3. click on the "Driver" tab, click "Uninstall".
    4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
    5 remove the related entries the display device.

    Reinstall the driver with your driver CD.

    Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

    Thank you

    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Color LaserJet 2605dn printing black and white only

    I have a Color Laserjet 2605dn, and all of the color ink cartridges have run dry. However the black cartridge has more than 2,000 pages of ink in the printer and it won't let me prink only black and white. It seems that the color cartridges must also have ink in them so that the printer to print. Does anyone know a work around so that I can print with the black cartridge and not buy color cartridges?

    Hello

    Thanks for the post.  I have attached a link below that can help.  Good luck!

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 110 & prodSeriesId = 1140727 & prodTypeId = 18972 & prodSeriesId = 1140727 & objectid = c00660239

  • Several printers print color when I choose black and white

    Here's a strange. Using a 5520 and a 7520, two printers will only print in color, black and white. I made sure I select black and white, and I've updated my drivers. Any ideas? Others use these printers without this issue, then it might be on my end, but I have no idea what it would be.

    Hello @Alex-Tutorme, greetings!

    Thank you for joining the HP support forums, I would like to help

    I understand that you are having problems when printing in black and white in two of your printers.

    We will try to change the printing preferences:

    • Go to control panel - devices and printers - give a Photosmart 7520 (also on Photosmart 5520) right-click and select Printing Preferences.
    • Go to the tab "paper / quality" and make sure that 'Black and white' is selected.
    • Now, click on the 'Advanced' button - check to the option "print in grayscale". Make sure it is turned on. Apply and save the settings.

    Please let me know if that solves the problem, or if you need assistance

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • Color photos are considered black and white only

    So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

    So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

    =============================================
    No guarantee... but following Microsoft "don't fix" may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Windows Photo and slideshow problems
    http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How to remove the unwanted parts of drawing black and white line

    I scanned in a flower art simple black and white lines.  I would like to remove some of the petals in Photoshop.  How can I do?

    Thank youFlower003.jpg

    I would like to remove the petals from the background.

    1 method: with the select magic wand the white bg, select-> invert the selection and create a layer mask.

    The layer mask is a monochrome picture, transparent black, white is opaque and anything in between is more or less transparent.

    You can now select the layer mask, use the brush and black paint, where you want to have something white, removed where you want to have something added. It is non-destructive and works very well on your photo.

    You can use shift click to 'draw' the small lines to attach to the top. According to the clarification, it will take more or less time. As I said are non-destructive.

    Second method: you use the pen to draw the lines around your flower vectors. With little exercise, you'll very quickly and you can always adjust the curvature of your curve, by pulling on the handles of the curve. Here you can see how it works: drawing with the pen in Photoshop tools .

    When done with the pen tool, you can add the vector line as a vector mask. You can even refine your mask after finishing. I suggest, since a mask of course work at a refined mask.

    The flower should not be on a layer, a background layer. Basemap layers have no transparency. The two methods are non-destructive, so you can return to the original image or parts of it, whenever you want.

Maybe you are looking for

  • Red question mark on the road to navigation network system process

    Hi allI correctly mapped network drives that I can view, browse and select using the API "GetOpenFileName().Everything works well for all applications running on my XP system. My user has administrator access.I also put in place a print (part of the

  • Try to connect Outlook 2003 to my gmail account

    I am trying to connect Outlook 2003 to my gmail - Vista as an operating system account; However, I keep getting an error message that says that Outlook could not connect to the server of outgoing (SMTP) mail. I checked the configuration of both the P

  • Touchpad disabled on Dell Inspiron 14R

    Somehow, I disabled the touchpad on my Dell Inspiron 14R. I was typing and all of a sudden on the right side of the screen, I got a message saying touchpad has been disabled.  Does anyone have an idea how to turn the touchpad on? Any help would be gr

  • button to fax on the HP Solution Center does not

    OfficeJet Pro 8500 A909g. Windows 7 Ultimate 64 bit. The button of the fax on the HP Solution Center does not work. This happens periodically. How to repair? Is there a solution long term for this bug?

  • Need to fix the touch screen, but cannot give IMEI

    Hello I would like to fix my phone to Sony support, but the site asks an IMEI before anything. Because the phone is broken (screen is more tactile), I can't get this IMEI and so cannot submit my phone to Sony support. What can I do? Thank you