After pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me?

Similar Questions

• When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  Reset preferences, reset the default workspace, and purge the cache.

  Damaged preferences or workspaces can cause unexpected behavior in Adobe Bridge. Purge the cache can solve problems of the thumbnail display.

  • Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  • Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

• When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers. What they mean/stand for?

  When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers.  What they mean/stand for?

  Network 01 for a network printer port.

• When you choose a webcam for use with host character, should what features I look for?

  When you choose a webcam for use with host character, should what features I look for in the webcam? For example, choose the one that captures full HD (1080 p)? Or any webcam will work? I just want to be able to make the motion capture process as easy as possible, so I think I must look over the webcam plug before you buy.

  Any webcam should work, but a higher resolution can improve the accuracy of tracking. Adequate/same lighting on your face is too important.

• Enter the BIOS with the F2 key at startup impossible

  I have the new Inspiron 7000 notebook PC series, the model number is 7737. I can't get into the bios Setup menu.
  I shut down the computer and then hit the power button and keep tapping the "F2" key, I see the text "setup F2" on the bottom right display and highlighted when I press the f2 key, but it continues to boot from the hard drive. I tried the F12 key and have the same problem.

  Now, I removed the hard drive and it will not even enter the bios menu.
  Am I missing something?

  I flashed the bios to version A04 and I still have the same problem when starting.

  I found this online and I am able to get into the bios with Windows 8.  Are there settings in the bios that can activate the startup shortcut key?

  To enter the configuration utility:

  1. Open the charm bar by pressing Windows-C
  2. Click settings
  3. Click change PC settings
  4. Click general
  5. Scroll down and click on Advanced Startup-> restart now
  6. Click problems
  7. Click on Advanced Options
  8. Click the UEFI firmware settings
  9. Click restart

• After capturing the BIOS with srsetupwin64.exe a supervisor password is set

  After I capture the bios with srsetupwin64.exe settings, so a supervisor password to restart the computer. I have only to capture settings in the bios with the command "srsetupwin64.exe/c /kpap d:\" The command was not successful (no file exists), I get the message:

  ERR - passwords do not match

  Err (8) - secure information could not be written

  Model: T540p (20BFS05l00)

  SRSetup version: 2.11

  BIOS version: 2.19

  It's not understanding why now a supervisor password. Now, the device is not usable. Please help, respectively according to me a replacement is necessary, but I think it's a bug.

  Concerning

  OK, the books have been ordered from a pool. And lenovo has set a password for the supervisor for the books of the pool. Now, information has arrived to the technician :-)

  Sorry for the false alarm.

  Concerning

• I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPEN IT AND PUT AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL ERRACER OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  I JUST DOWNLOADED AND INSTALLED ADOBE PHOTOSHOP ELEMENTS 13. WHEN I OPENED IT AND PUT IN AN IMAGE TO CHANGE. THERE ARE ONLY 8 TOOLS SHOWING ON THE SIDE LEFT. THERE IS NO TOOL GUM OR OTHERS. WHAT SHOULD I DO TO SOLVE THIS PROBLEM. «"«DINO»»»

  Hello

  You are probably using the Quick - switch to Expert mode at the top. All the tools are only available in Expert mode.

  Brian

• Cannot, enter the BIOS with the F1 key.

  Hello

  I tried to install Mac OS X recently (10.7 Lion on Chameleon 2.1 RC1 16xx with iCloud patch), and the installer crashed. Now when I boot my ThinkPad I press ENTER to display the boot options. When I click on F1 or F12 ThinkPad not responding when I press enter or ESC, it will do what it must do.

  I've got "CMOS reset" error after restarting after the failure of the attempt to install Mac OS X. I know that sometimes, Mac is reset CMOS (I have a PC with Mac and it works well).

  I can boot Windows 7, but I can't the configuration of the BIOS.

  I had the supervisor password (I remember ), maybe that's the problem.

  djmati11,

  Sorry for my English.

  EDIT: I've got:

  ThinkPad Edge 13 (0217-2QG)
  Operating System: Windows 7 Home Premium
  i3-380UM(1.33GHz), 4 GB RAM, 320 GB 5400 RPM, LCD 13.3 in 1366 x 768 HD, graphics card Intel HD, Intel 802.11bgn wireless, Bluetooth, camera, 6 c Li-ion, Win7 Home Premium 64 1 Gb Ethernet, UltraNav

  @djmati11,.

  Try to hold the Fn then just press F1 and see if you can boot into the BIOS.

  JMT

• Portege R500: Enter the BIOS with supervisor known password

  Hello

  I have just taken delivery of a R500 with installed Xubuntu.

  I need to get into the BIOS to change some settings. I know the supervisor password and I know that normall pressed ESC, then press F1 to enter BIOS. Unfortunately, I don't get the opportunity to enter the supervisor password - it just directly puts me in the "User" settings

  I also have problems to get the F12 boot device settings to work.

  The manual suggests that I use the utility Configuration of Windows to address some of the bIOS settings, however - I am not Windows...

  Any thoughts?

  Weird is... as far as I know you have had installed to access some bios options longer windows.

  The problem is that there is no other software then this utility in windows and the common module that can access the hardwarelayer.

  So, if you want to change something, you need to use windows... :/

  Welcome them

  Tip: you can use another HARD disk where you install Windows. Perhaps a good way to keep ubuntu on HDD

• I can't uninstall all of the programs on my computer. Also the windows updates do not install. Windows Vista Service Pack 2 for x 64-based systems (KB948465)

  I think I have problems arising from the Windows updates do not install it.

  I can't uninstall all the programs already on the computer - I get the message "Please wait while the current program is finshed uninstall or changed" on every single program.

  Also, anything with an authorisation button freezes as son as I click on it without the authorization window popping up. for example. the clock or the managed task advanced details.

  This has led to problems trying to install other software for example. I tried to install a game that failed, because the .NET framework 4 would not install.

  Help!

  Hello

  You can follow below link that can help you to solve your problem:

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  I suggest you follow the steps in the Microsoft KB article for your problem of update.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

• Can I update the bios with software for windows vista?

  I have a HP Pavilion a1747c desktop computer and I need to update BIOS for virtualization technology. However the update the BIOS only supports Windows Vista, and I have Windows 7. Can I still updated it somehow?

  Yes, you may be able to extract the actual BIOS file of the installation package compressed and use a flash routine appropriate for flashing BIOS under another operating system, but you do so at your own risk. Any damage to your computer by using this process is at your own risk and you take responsibility for it.

  Please send Bravo

• OS5 stops Javascript when the backlight is off or time > 10 seconds - is this a problem for the WebWorks applications?

  I read that the OS5 browser stops all scripts once the backlight turns off, or if the script takes longer than 10 seconds to run. The problem is that the scripts will automatically restart (!). I really hope this isn't the case for the WebWorks applications, I can't have the app stop working if the backlight turns off. If the general development of BB moves towards HTML5 and JS and expects to have success, this kind of problem cannot exist.

  WebWorks for OS5 doing?

  No, this time-out does not occur for applications WebWorks... only for pages running in the browser.

• When the design view in Dreamweaver CC is magnified, what method is used for the panorama of the image to see more of the top left corner?

  I can't figure out how to move the image enlarged in Design view of Dreamweaver CC.

  What strikes me as being virtually useless, when it seems to view all point design is so I can click on an item and move it without entering the mode Code.

  You don't clearly understand how to work with Dreamweaver.  DW is not a click & drag, the WYSIWYG application.  The Design view is, at best, an approximation of what can expect to see in some older browsers.   Ideally, you should be working with Code view or split with Live View and editing in the code pane.

  APDivs or layers have been deprecated in DW CC because they aren't a good way to layout of web pages.  If you are still using this approach, it would certainly explain well many of the problems you encounter.   Best advice, start with a setting shaped pre-built CSS.   File > new > Blank Page > HTML.  Select a CSS formatting in the Panel 3rd & hit CREATE.

  Go further, not to use positioning.  Learn to use CSS margins, padding and floats to align items if you wish.

  HTML, CSS & Web Design theory tutorials-

  • http://www.html.NET/
  • http://w3schools.com/
  • http://www.csstutorial.NET/
  • http://phrogz.NET/CSS/HowToDevelopWithCSS.html
  • http://webdesign.tutsplus.com/sessions/Web-design-theory/

  Nancy O.

• Virtual Drive do not show in the BIOS after you connect Virtual Media to the iDRAC

  Hello

  I had a problem with iDRAC to install from an ISO OS image to a M600 server.

  I have measurements are:

  1. connect to the iDRAC, System-> Console-> launch Viewer

  2. in iDRACView, Media-> CD Media-> ISO Image-> [select .iso image and OS]-> Connect-> closed

  After restarting the server, "boot sequence" in the shown BIOS

  CD-ROM USB device (not installed)
  USB Floppy device (not installed)
  Hard drive C:
  Embedded NIc 1 MBA v4.4.4 Slot 0400

  Manaul Dell boot sequence should show Virtual CD etc but I have everything installed not.

  Cannot start server from the image but the "current status" in Virtual Media to iDRAC is 'connected.

  My server is a Dell M600 and iDRAC IPMI version is 2.0 and the firmware version is 1.60 (Build 3).  Help, please.  Thank you

  RDG,

  Certainly an unusual problem.  A few questions to better understand the issue.

  1st. A it worked correctly at any time, or is - this first enter this part of the functionality of the iDRAC?

  2 have you tried different media in order to ensure that the issue is not isolated just for this disc?

  What is particularly unusual as connected virtual media lists, it's clearly is not resolve as expected.

• I can copy a URL, but may not be able to paste into the body of an e-mail message. Also the hypelink doen't it. I don't have this problem with Internet Explorer...

  When I copy a URL and go to paste it into an email, it will not stick. Another box opens. I can paste the URL in the subject line, but doesn't hyperlink it. (blue) When you use Internet Explorer, I don't have this problem. I'm new to FF with a new computer.

  Paste a link in the subject line does not a link so that the part is normal. But being not not able to paste into the body of the e-mail is not. I can't think of a reason that would happen. What email program are you using?