After replacing the PSU and GPU in my HP Pavilion desktop computer, the wifi stopped working.

I'm upgrading my pc, I plug a new PSU and video card.

After successfully, I replaced and installed, I booted up my PC, but it showed that none of the networks or wifi connections are available.

I read that maybe it's something to do with the antenni?, I noticed something that looked like antenni tangeled upward in the power supply cables, I did not use them. but I have no idea what could be the problem.

Thank you for the information, @henry321.

Yes, I suggest to leave the side panel on the computer and then move the led in the case and look at the signal.  You may need to route through an opening in the case is outside of the case.  I think I read that it is the best way to get a good signal.

Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

Tags: HP Desktops

Similar Questions

  • Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

    Operaring system: Windows 7 64-bit

    CPU: Core i5-2500, 3.3 GHz

    Memory: 10 GB

    Video graphics card: GeForce GT 420 - OEM

    Hard drive: 1 TB

    Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

    Power supply: power supply 300W

    Several features of the product: HP Pavilion Elite HPE-510 t

    due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

    GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

    GPU size: 9 "x 4.4"

    Power supply: Antec High Current Gamer HCG-750 750W Series

    "Power supply Dimensions: 7.1"x 5.9"x 3.4"

    I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

    Thank you

    The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

    Frank

  • 0x8E5E0247 of error after installing a SSD Crucial of 512G on my HP Pavilion desktop computer

    I get this error even after installing a 512G SSD-Crucial in my HP Pavilion desktop computer.  I cloned it from my previous hard drive using Acronis 2014 edition.  I don't know that they are connected.  I called Crucial and asked if there were drivers more recent etc and the answer was not.  Any thoughts?

    Original title: error 0x8E5E0247

    Hey, Cliff,

    Thank you for visiting Microsoft Community.

    I understand that you get an error code with your SSD.

    Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

    One of our community member had the same type of program where Glenn24 responded on 25 January 2011.
    Please refer to this and check if it helps:

    Additional information:

    If you have an Intel based, visit the Web site below and it will automatically scan your computer and give you updated information on the pilots.

    http://www.Intel.com/p/en_US/support/detect/

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • How can I reinstall the CS6 extended 64-bit after replacing the hard drive and the OS?

    How can I reinstall the CS6 extended 64-bit after replacing the drive hard and Windows 7 64 - bit OS?

    You can download the installer from the trial directly. Find the appropriate link below.

    You must be on a page of trial download to use the links, otherwise, you get an error message.

    For example, to load the next page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

    before you paste the link into the address bar.

    http://trials2.Adobe.com/AdobeProducts/PHSP/13/Win32/Photoshop_13_LS16.7z

    http://trials2.adobe.com/AdobeProducts/PHSP/13/Win32/Photoshop_13_LS16.exe

    You need, to kepp the two files downloaded to the same folder and after downloading, click on the .exe file to extract .7z

  • HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

    Recently, I messed up my CPU and bought a replacement (exact same kind). I am running windows 7 ultimate and for about 6 months prerequisites with no problems. After replacing the CPU I get intermittent lock ups, sometimes with a small portion of the screen flashes. I say intermittent but at least every 15-20 minutes. Different programs, different habits, but still the screen freezes.

    I went in and deleted the driver under graphics cards, pick a 'completely remove the option' - it after restarting the system on its own charged for a Standard VGA Graphics Adapter and since there is then no more accidents. Of course the functionality is not as complete, large icons and such, but it works.

    If it certainly seems to point to a driver conflict I think. But for this machine, is there ever any single Vista Windows 7 driver. My skills are not so, but I'm moving.

    Any guidance?

    Hello

    Yes, your PC has integrated graphics controller: ATI Radeon XPress 200, we don't find drivers compatible Windows 7 ATI.

    The BEST OPTION: Buy a video card, then insert it into slot PCI Express 16 on the motherboard to better display and multimedia performance with Windows 7 to a value using else, it looks just like Windows XP

  • HP ENVY 17-3290NR: wrong information after replacing the motherboard

    Hello
    I have a problem after replacing my motherboard because the old stop working
    I had a new HP spare parts for my HP ENVY 17-3290NR after installation I realized that in hp say assistance:
    HP pavilion dm3 instead of hp envy, series and product number say 123456789
    so I can't use my drive recovery or the app by default because I've read that I must retatoo the motherboard, but hp do not provide me with dmifit or something similar, then what can do? I call the tech support of hp and they just told me to go back to that motherboard despite the part is correct, he's simply wrong information

    so, how can I change the information on the bios?

    I retattooed my motherboard using dmifit and now everything works fine

  • High temperature after replacing the CPU T2500-> T7200 at T60

    After replacing the T2500 CPU temperature CPU T7200 varies from 70 to 85. It seems high, I think about the replacement of the thermal grease or thermal paste application. What could be better? To finish with the original grey Ribbon and fix a new radiator or better coat of toothpaste?

    orion9727 wrote:
    There was a test done and toothpaste is out near dough more themal.
    Artic 5 should never be used in a laptop.
    He money and this is a no no on mobile cpu.
    Use a no driver or a thermal buffer.

    the gray Ribbon is a preferable themal pad use this WHICH CAME into IT.
    Because maybe a wedge and to finish with this and without contact.

    you upgraded from a 31 to 34 watt TDP watt not much, but he's going to run hot.
    75-80 c is hot Yes, but you have class 65nm cpu will run hot because it is old and a lot of work.
    If you all know toothpaste can served in the tests but I have not use because it can dry out and not sure what exacly.
    heat wise, I do belive in toothpaste is wise very good heat but stick with the gray Ribbon.

    Please do not take into account the (re) post above.

    I used AS5 on thousands of ThinkPads with no ill effects, in fact the opposite. Research experiences minimal posted by other owners on Bill Morrow ThinkPad Forum will confirm this statement as well. Arctic Silver is as good as it gets unless you want to spend $50 for a tube of thermal paste.

    To OP, your machine is running too hot for the processor in question. My 15 "T60p with T7600 is inactive at least 50 degrees C and does no more than 62 in normal use. And Yes, it was AS5 inside.

  • My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

    I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

    Thank you!

    Hi @Beaglemom49779,.

    I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

    Have you had the same problem with the printer before replacing the toner?

    It could be a hardware or with the printer fuser problem.

    If the problem started just after replacing the toner then most likely, the toner.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

    Number one cause of problems with toner.

    Check if the drum unit for damage:

    1. remove the cartridge of toner product and check that the tape has been removed.
    2. check the memory chip for damage.
    3 examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

    His fingerprints on the imaging drum can cause print quality problems.
    4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

    Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

    Good day!
    Thank you.

  • System Restore to factory settings after replacing the hard drive?

    I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

    Thank you

    After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

    You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

    Lenovo - call to order recovery disks:
    http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

  • Windows will not start after replacing the motherboard

    To begin, I must say that I am pretty clueless when it comes to computer skills.

    To summarize, I sent my CPU to a repair shop when my computer has stopped working. I removed my hard drive before starting the repairs because it contains confidential data.  They have narrowed the cause to a faulty motherboard and replaced by a new dissimilar.
    At the store, the guy had a vista 64 bit recovery disc so I have it home and tried to fix it. He said it will be a breeze and relatively bug free. As part of the Startup Repair, I tried to drive the Startup Repair, and tests were all successful except one. An error of diagnosis readings
    "Unspecified system configuration changes may have caused the problem.
    Repair action: repair and checking the integrity of system files
    Result: failed. Error code 0 x 490
    time taken = 720023 ms
    Everything I've done has led to a brief blue screen to the Windows loading screen and then it restarts itself.
    I also tried to restore to the previous two points, but it has also led to the square - a brief blue screen after the loading screen and restarts on its own windows. I'm not ready to reinstall vista and I can't afford to do it too, because I don't have enough disk space to perform another installation. Nor am I willing to reformat one of my two disks.
    If you need additional information on the specifications of the material that must be provided, ask me.
    IM at my end intelligence now, and I really hope to solve this problem.
    Thank you.
    Bryan M

    Hello

    I'm sorry, but you have to completely reinstall the operating system after replacing the motherboard with a different motherboard.

    "Startup Repair" is exactly that: a start NOT a repair system repairs

    What has happened, it is the operating system on your hard disk contains the drivers for the old motherboard and does not and you can't change drivers in doing what you do.

    The only way to solve this problem is to reinstall Vista.

    You wipe the hard drive and restart and make sure that the repair shop gave you the disc to install the new drivers of motherboard after you reinstall vista or download on the website of the manufacturer of the motherboard.

    And here a question for you to consider, too.

    If you bought a copy of Vista retail yourself, you can use the method above to a new installation and then install the new disk motherboard drivers.

    But, if your computer is a trademark of purchased manufacturer, HP, Toshiba, etc., you can not change the motherboard that the license of Vista OEM is stuck at motherboard the origin of the manufacturer that it has been installed on and now you canceled your Vista license.

    See you soon.

  • HP Pavilion G6 - 2148TX Power Up after replacing the fan problem

    Hello

    After replacing the fan, I have a power issue with the laptop. Basically, the laptop will only fuel on the power cable disconnected to the motherboard. It is by mistake only after the fan has been replaced and everything got back together, I noticed that the battery was not charging.

    I then opened the machine and reconnected the power cable to the motherboard and nothing - no power.

    When connecting to the source of power with the battery in place, adjacent to the power supply lights in WHITE then remains ORANGE and will not. Seeing no other, no fan noise, nothing.

    If I remove the battery, the adjacent to the power supply led in WHITE and white rest however not feed either. Same agin, no LED, no fan noise, nothing.

    Now, I opened the machine upward and disconnected the power from the motherboard. Put it all back together and that the laptop starts as usual with the battery and it works very well. (Well until the battery runs in any case)

    I'm looking for some advice on what the issue could be given my conclusions.

    Thanks in advance.

    Well, I've now solved the problem. I bought the DC power cable that connects the motherboard to the socket on the laptop. $15 on eBay.

    Connecting the supply cable to the Jack of the laptop, the 'white' and is LED stayed on. The battery was not installed at the time. With a deep breath, I pressed the power button expecting anything to happen, but when he lit a big smile appeared on my face.

    The laptop booted up normally.

    I then install the battery and the battery indicator showed it to load. Everything is good and a son of 18 very happy. The fault was as expected according to my previous email. I hope this helps someone in the future, shame on HP response was off the mark in light of the original explanation and clarification post. But appreciated nonetheless.

  • This PSU and GPU will work with my dell inspiron 660?

    Hello

    I got my dell inspiron 660 earlier (2 years ago) and was thinking of upgrading the PSU and GPU (I'm not a big PC gamer so cheap products, I chose will be much used) anyone of you could tell me if it would be compatible with my inspiron and between them. And if not could you tell me some compatible CPU and GPU, my spending limit is £90.

    GPU - Asus GeForce GT 610

    PSU - power supply 600W Sumvision power X 3

    Thanks in advance,

    I think that the 660 has a 300W power supply.  What is the Min requirements for the GT 610?  I think you could slamming in there without having to upgrade the power supply at all.

  • How can I reinstall windows 7 after replacing the hard drive?

    How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

    Well, that certainly puts a different point of view on this subject.

    There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

    If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

    http://support.Microsoft.com/kb/326246

    Tom Ferguson

  • After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

    Original title: dvd player

    recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

    Duplicate the content of the thread:

    After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

    My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

    Hello

    You can check these links and try...

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    http://support.Microsoft.com/kb/982116

  • Install the operating system after replacing the corrupted hard drive Asus q500a

    The hard drive on my Asus Q500a is bad (he had checked the repairman). They told me that I could replace it (it will just keep failing until at last it dies just) but I have to re - install the operating system. The laptop comes with Windows 7 and I upgraded to 8 when it came out (I think). I don't have a recovery disk.

    How can I replace the corrupted hard drive and re-install the operating system?

    If I need to buy Windows 8, where can I find?

    Would it not easier that I left the repair shop handle it?

    Thank you in advance.

    Hi Kristi,

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    According to the description, I understand that the problem with you want to reinstall the operating system after replacing the hard drive corrupted on the system.

    Certainly, I understand your concern and will try my best to help you.

    I suggest you check the suggestions contained in the Microsoft link below and check if this is useful.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/replacing-hard-drive-and-re-installing-Windows-8/e8dbfc81-5294-4c94-9276-0f36e0a66e59

    In addition, you can see the suggestions in the link given below.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/reinstall-Windows-8-after-the-operating-sytem-has/30d47e63-296b-4466-ae9d-4628084541dc

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

    Jayant

Maybe you are looking for

  • MacBook pro 13 inch mid-2012 with the help of el capitan

    is there anyone with a macbook pro 13 inch mid 2012 that the use of el capitan? I want to improve my macbook to mavericks in el capitan, but my friend told me not to do. Because she just update its macbook (same model with mine) and it becomes slower

  • CAL replacement certificate?

    Hi people, We had mailed a CAL to a site of ours, but typically his party missing. We have the code (sound in active use on the server it) but would like a replacement certificate, how can I do to get that? Thank you!

  • Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

    OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy Portable Hi down tried restore none tried to install the new copy off vista prem with no jo

  • WRT160N & IE problems

    I've had my WRT160N router installed for over a month now and you have a recurring problem for Internet Explore to connect to the internet.  I was not able to determine a consistent cause; Sometimes a ping query will show internet connectivity, other

  • MICROSOFT ISATAP

    This message appears after I replied to a message from this new software found, taking the market to follow recommended for the loading. "Windows encountered a problem installing the driver for your device. Windows found driver software for your devi