After scoring off to 'no result', I always get win % not showing

Similar Questions

• VCSE-VCSC-TMSPE-AD, always get 404 not found for connection movi

  Hi, Experts.

  Location:

  VCS-control: X7.2.1

  VCS-Expressway: X7.2.1

  TMSPE: 13.2.1

  RE: Windows 2K 3

  By VPN, movi user can connect to VCS-C(which integrated with AD, so user authentication in AD), but without a VPN, by VCS - E, movi user cannot connect.

  VCS - E a static NAT to a public IP address with all the necessary ports open.

  VCS - E have minimum configuration to factory default as below:

  1. name, IP address, DNS, NTP

  2. create the SIP domain, enable SIP

  3. create VCS - c TraversalZone, and h.323 and SIP connection was estalished, shown as green indicator

  4. create the link bandwidth needed across all areas

  5. create a rule to search for courses, the target value for any alias traversalzone

  6 political authentication of all areas the value "do not check references" defaultZone, defaultsubzone, traversalzone

  See below for logging I capture VCS Expressway, she always get back with 404 not found error message:

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 448" Module ="network.sip" Level = "INFO": Src - ip = "172.16.50.3" Src-port = "25000" detail = "receive the Request OPTIONS = method, Request-URI = sip: 172.16.5.10:7001; "transport = tls, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 448" Module ="network.sip" Level = "DEBUG": ip - Src = "172.16.50.3" Src-port "25000" = "

  SIPMSG:

  | Sip OPTIONS: 172.16.5.10:7001; transport = tls SIP/2.0

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK560062cbd420650fbdcd1423acc049d649; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34143 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  TO:

  Max-Forwards: 0

  User-Agent: TANDBERG/4120 (X7.2.1)

  Support: com.tandberg.vcs.resourceusage

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 448"Module =" network.sip"Level ="INFO": Dst - ip ="172.16.50.3"Dst-port ="25000"detail =" send = 401, method = OPTIONS, To = sip response Code: 172.16.5.10:7001, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 449" Module ="network.sip" Level = "DEBUG": Dst - ip = "172.16.50.3" = "25000" Dst-port "

  SIPMSG:

  | SIP/2.0 401 Unauthorized

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK560062cbd420650fbdcd1423acc049d649; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34143 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  To: ; tag = 7ea25e18118002bd

  Server: TANDBERG/4120 (X7.2.1)

  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b1863670c75e193fed666bb5e0b381b7081bccfd4f029bc392157553d58d", opaque = "AQAAAM/lI9sgrVIOAlyA49AKb1XNNSQG", stale = FALSE, algorithm = MD5, qop = "auth".

  Content-Length: 0

  |

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 452" Module ="network.sip" Level = "INFO": Src - ip = "172.16.50.3" Src-port = "25000" detail = "receive the Request OPTIONS = method, Request-URI = sip: 172.16.5.10:7001; "transport = tls, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 452" Module ="network.sip" Level = "DEBUG": ip - Src = "172.16.50.3" Src-port "25000" = "

  SIPMSG:

  | Sip OPTIONS: 172.16.5.10:7001; transport = tls SIP/2.0

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK0543f31f3f612b0be1752d6785832d1a50; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34144 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  TO:

  Max-Forwards: 0

  User-Agent: TANDBERG/4120 (X7.2.1)

  Authorization: Digest nonce = "b1863670c75e193fed666bb5e0b381b7081bccfd4f029bc392157553d58d", realm = "TraversalZone", opaque = "AQAAAM/lI9sgrVIOAlyA49AKb1XNNSQG", algorithm = MD5, uri = "sip: 172.16.5.10:7001;" transport = tls", name of user ="exampleauth", response ="5424b23056e3408bb7c5057ca8921cba", qop is auth, cnonce ="32d6888de492c717c771f89e4b9931e3a4dd3090380a925b76349acf62b7", nc = 00000001

  Support: com.tandberg.vcs.resourceusage

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 453" Module ="network.http" Level = "DEBUG": Message = "Request" method = "POST", URL ="http://127.0.0.1:9998 / identification/name/exampleauth information" Ref = "0x460b500".

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 456"Module =" network.http"Level ="DEBUG": Message = 'Response' Src - ip ="127.0.0.1"Src-port ="9998"Dst - ip ="127.0.0.1"Dst-port = '45146' response =" 200 OK "ResponseTime ="0.003486"Ref ="0x460b500 ".

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 456"Module =" network.ldap"Level ="INFO": detail =" credentials for authentication in identity directory: exampleauth.

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 458"Module =" network.sip"Level ="INFO": Dst - ip ="172.16.50.3"Dst-port ="25000"detail =" send = 200, method = OPTIONS, To = sip response Code: 172.16.5.10:7001, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 458" Module ="network.sip" Level = "DEBUG": Dst - ip = "172.16.50.3" = "25000" Dst-port "

  SIPMSG:

  | SIP/2.0 200 OK

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK0543f31f3f612b0be1752d6785832d1a50; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34144 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  To: ; tag = 2f5366fe32e2f0ee

  Server: TANDBERG/4120 (X7.2.1)

  Support: com.tandberg.vcs.resourceusage, path, outbound, gruu

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime =" 2012-11-28 09:22:02, 195"Module =" network.tcp "Level ="DEBUG": ip - Src ="101.85.21.125"Src-port ="51161"Dst - ip ="172.16.5.10"Dst-port ="5061"detail ="TCP connection ".

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 196" Module ="network.tcp" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port = "51161" Dst - ip = "172.16.5.10" = "5061" detail = "TCP connection" Dst-port "

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22:02, 277"Module =" network.sip"Level ="INFO": Src - ip ="101.85.21.125"Src-port = detail"51161"=" receive the = SUBSCRIBE Request method, Request-URI = sip:[email protected] / * /, [email protected]/ * / '.

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 277" Module ="network.sip" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port "51161" = "

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TLS 192.168.1.3:51161; branch = z9hG4bKf60920d0f72bbac899bfab5b8e5e30c9.1; received = 101.85.21.125; rport = 51161

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  Contact: <> [email protected]/ * /: 51161; transport = tls >

  From: <> [email protected] / * />; tag = c9331fde9f056be2

  To: <> [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (MCX 4.5.7.16762) - Mac OS X

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.5.7.16762;clientid="7B26CD64-18E7-5443-982A-DD2E496560D2";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  |

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22:02, 282"Module =" network.sip"Level ="INFO": Dst - ip ="101.85.21.125"Dst-port ="51161"detail =" send = 404, method = SUBSCRIBE, To = sip response Code:[email protected] / * /, [email protected]/ * / '.

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 282" Module ="network.sip" Level = "DEBUG": Dst - ip = "101.85.21.125" Dst-port "51161" = "

  SIPMSG:

  | SIP/2.0 404 not found

  Via: SIP/2.0/TLS 192.168.1.3:51161; branch = z9hG4bKf60920d0f72bbac899bfab5b8e5e30c9.1; received = 101.85.21.125; rport = 51161; DefaultZone = ingress-box

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  From: <> [email protected] / * />; tag = c9331fde9f056be2

  To: <> [email protected] / * />; tag = 709c4dfeda5f3666

  Server: TANDBERG/4120 (X7.2.1)

  WARNING: 172.16.5.10:5061 399 'political response '.

  Content-Length: 0

  |

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 295" Module ="network.tcp" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port = "51161" Dst - ip = "172.16.5.10" Dst-port = '5061' = "TCP connection is closed" detail "

  Hello

  you mention that the VCS-E is behind a static NAT. The VCS-E has the option of two Network Interfaces key installed, and if this is the case, do you have properly enabled and configured the static NAT configuration on the VCS itself, on the system > IP page in the web interface of VCS?

  This option key is required when you deploy the VCS E behind a NAT, you can find more information on this in Appendix 4 of the following document:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

• When I try to search with Google or Bing I always get 404 not found

  I can't search my PC

  Hi JulietAslakson,

  1. Did you the latest changes on the computer?
  2. What web browser do you use?

  The article below and try the steps mentioned only if you use the browser Internet Explore web, check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  You will receive the HTTP 404 error when Internet Explorer is able to connect to the website, but the webpage is not found. This error is sometimes caused because the webpage is temporarily unavailable (in this case, you can try again later) or that the Web page has been removed.

• After you import the image files into Lightroom, Lightroom does not show my folder hierarchy.

  Before I started using Lightroom, I got my pictures organized in a hierarchy of folders.

  My_images	A	A1
  		A2
  	B	B1
  		B2

  (The actual structure is deeper than this example a few levels.)

  I imported the A1, A2, B1, B2 files in Lightroom and gave them the keywords that reflect the folder structure.

  Now, when I look in Lightroom under folders, the structure is gone (it is still there on my drive). All I see is a list of A1, A2, B1, B2 files, so it is difficult to navigate to the folder that I want to work with.

  How can I get Lightroom to display the folder structure in that my images are in fact?

  Found a solution. Right click the folder and select "show parent folder.
  Repeat this operation several times until you see the folder structure you want.

• Always get the host process for Windows Services has stopped working

  I read all responses answered messages ago. I did everything in the answers and always without result I always get the suggested message. Can anyone help with this? Here is the error log

  Signature of the problem
  Problem event name: APPCRASH
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c000071b
  Exception offset: 00088d 15
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0e02
  More information 2: b21b56b606e7544720668ce364087082
  3 more information: 0e02
  Additional information 4: b21b56b606e7544720668ce364087082

  Hello

  The SVCHOST. EXE is connected to many different processes and it is not uncommon to be asked to run a number of times.  As long as Svchost.exe is requested in the system32 folder is not the issue.

  Method 1

  In many cases this would happen because of security software installed on the computer.

  I suggest you disable the security software installed on the computer and check.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2

  If the previous step fails, then it may be due to infections of virus or malware on the computer, I would say that you scan and remove all infections from the computer and check.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use databases of Microsoft security to scan your computer

  http://www.Microsoft.com/security_essentials/

   

• iPhone 5 c screen went black with 78% battery. Tried turning off then without result.  The phone felt warm to the touch.  Is - fixable?

  The screen on my IPHONE 5 c became black and does not.  Before that I tried to send a text without response, battery was 78%.  I tried to turn on/off again without result. Any suggestions?

  Hello carolfromlincoln!

  Thank you for joining the communities Support from Apple! You might want to try the steps in this article: If your iPhone, iPad or iPod touch does not illuminate if these steps do not work:

  Contact Apple support to set up the service if you have any of these problems:

  • You always see a black screen after loading, reboot of the force or following the steps described in this article.
  • You see a black screen, but he can hear the alerts, the sounds and vibrations.
  • Your screen is enabled, but it does not respond to the when you tap, slide or try other gestures.
  • You cannot force your device restart because your Home button or the sleep/wake button is broken or blocked.
  • Your device is stuck on the Apple logo, displayed a solid color, or is not recognized in iTunes.

  See you soon!

• USB ports still under voltage after power off

  Hi, I use a sleekbook of 6-1260ez want on Win8 x 86. After I power the system off, the USB ports have always power. The wired mouse LED is still. In addition, the laptop batteries are drained after 2 or 3 days without being plugged in, although the power is off.

  I installed the latest chipset drivers. the option "Scan now" on your support page is not find old drivers. What can I do? Is this a warranty case?

  P.S. This thread has been moved from the Notebook - HP ProBook ZBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE for laptops - pavilions, Presario. -Hp moderator of the Forum

  This computer has a usb 2.0 support. That so you can recharge your cell phone or your mp3 player with the computer turned off. I found and read the manual of the computer.  That is why your mouse is always on.  Then you'll have to unplug the mouse when you're not using it. I hope help you.

• After update my iPad Pro with 9.3 iOS iPad crashes on safari. For example I googled something results appear, but I am not able to enter any page, because the iPod does not respond

  After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page

  It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.

• MG5300 printer only works now iMac after turning off, then turn it on again

  MG5300 printer only works now iMac or Maclaptop after turning off, then return. Has worked well for a long time, when issue print from a device, the printer icon bounces and messages 'no connection' so stop printer, and then turn it on again and prints. For a few minutes. Next print, have to start all over again. Any thoughts? Thanx.

  Support was terrible. Checked to make sure that files and available wireless network. I had downloaded and installed the drivers. Reset the router and it is up and running again.

  Thank you Canon Support, Jason by name. Well done.

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• I have a photosmart C7280 printer. Itself under after turning off power and gets the message error/blink

  Photosmart C7200 puts himself after power off the power.  I get an error message and the lights flash.  To clear, I have to disconnect.

  I get various error messages-

  'B8000080, B858BD82, B03Fcc84' I tried all suggestions from HP and nothing elimates the problem web page.  In my view, that it is a common problem with the HP printer.  I want to live with the problem until that matrices of the printer.  I am very disappointed in the way that HP does not support to fix this and future purchases that I turn not to have bought HP products.

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• USB ports suddenly freeze and stops working for 10 sec after power off or powered speakers

  Original title: Usb Ports stop working for 10secs after power off or powered speakers!

  Hello

  I have no why, but my usb ports suddenly hangs for 10secs when my speakers turned on or off the power in case of operation of pc... And I have a usb mouse usb wireless keyboard and... with this problem that I can not work properly... and some times my mouse work in early upward and then I should use my keyboard to restart the pc... Then it works very well! Help me please. !

  Hi Thierry,.

  This issue does not appear with Windows that even after you perform a clean installation. So for me, it looks like a material damage. I would recommenmd get you in touch with the manufacturer of your computer and to do the repair.

  Do not hesitate to contact if you have problems with Windows in the future.

• How to make a box for error off my screen. Wrong e-mail address does not pass & I always get error days later

  How to make a box for error off my screen.  Wrong e-mail address does not pass & I always get error days later

  Hello

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

  • You use the Windows 8 Mail or any other email client?
  • When was the last time it was working fine?

  If you encounter problems with Windows Mail app, try the following steps.

  Step 1:

  Please go to the link below, download the file and run it.

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  I suggest to go through the link and follow the given procedure. Here is the link for your reference.
  Solving problems with a soft

  Hope this information was useful.

• My first stop runnig suddenly when I try to drag a clip to the timeline or after scoring its entry points and in the Preview Panel, I try to drag it to the timeline.

  Suddenly my first Pro CC 2015-2 arrested runnig when I tried to drag a clip to the timeline, or when, after scoring its entry points and in the Preview Panel, I tried to slide the timeline. Apparently it works because it keeps at the opening, but one cannot do anything but you close with control Q; the keys on the keyboard are one thing that really works.  I can't do anything with the mouse and it seems that a certain way, the software crashed, but with all the panels open and without any warning. I copied the complete proyect to your laptop with the first Minister Pro 2015-1 and it happened the same thing, so I think the question is on the project and it started to happen after the update by 2015-1 about 10 days ago (this is not the first time that's happened but to this day I don't know how every time it turned fixed) old work projects and I finish the proyect (from scratch from another) on the same computer and with the same OS (windos10) without any problem with the Premier Pro CS6. So far I have not had problem with the version of 2015-1 that I bought last November. Could someone tell me what is happening and what is the solution?

  [edited by mod, too long title]

  Fixed with a new version of the same driver 341.92. I hope that it will be forever. Thanks for your advice and also thanks to the chat support team that came to the same conclusion.