After that an update of Windows can not hear noise and can't read the DVD

Similar Questions

• error on my dvd windows can't read the dvd, and the answer is: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I have an error on my windows dvd cannot read dvd and the answer is: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  can you help me please

  Thank you

  If you are uncomfortable with the use of the registry, try this

• Creation of DVD Windows can't find the dvd burner

  Hey, I have long used Director Windows and published my films through windows dvd creation, and programs have been working perfectly... but now I have a problem... When I get to the part where I want to make the movie, I can get the project ready and make the titles and all, but when I'm choosing to burn the project/dvd, create dvd windows can't find the dvd burner? I checked the bios and Device Manager and used another program cdburnerxp to burn a file... Then, how the creation of windows dvd to save my dvd burner?

  Hi mwinterberg,

  I don't know if you are still struggling with this problem, but looks like it's maybe a codec for your DVD Burner problem. See the following link for help with this:

  Codecs: Frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/3d0c5a49-8F61-45cc-8A7D-38c4695ba9291033.mspx

  I hope this helps. Please report if you still have any questions.

  Dave D

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a HP G56 I can't read the DVD on it more!

  I tried the automatic update and the Microsoft Fix tool but it says it cannot detect a problem!

  Doesn't seem to be able to locate the CD ROM on my laptop, a message appears that device driver software was not successfully installed.
  Thank you in advance of the charges.

  Hi Don,.

  Thanks for choosing Microsoft Community to post your question.

  It seems that you are unable to read the DVD. I'll be happy to help you. This problem may be caused because of DVD device drivers.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. What is the model number of your laptop HP G56?

  3. what fix - it did you run?

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: Try to download and install the drivers for DVD at the following link.
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=321957&prodSeriesId=4247525

  Method 2: Try the following Microsoft Fix it

  Your CD drive or DVD cannot read or write media: http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  

  Method 3: Refer to the suggestions from this link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Lexmark x 73 will work after that I updated to Windows Vista?

  Original title: lexmark x 73\windows vista

  I have windows vista and I want to install my lexmark x 73 prints I will update of windows, but I don't know to update and it'll work

  Hello Betty,.

  According to their website, the X 73 is a laser printer that works on the XP Windows OS only. So if you have this impression under Windows, it must be in compatibility mode. Is this the right printer, or you have a different model?

  If this is the right printer, it will only work on a 32-bit operating system, so you'd be lucky so he can print in Windows 7 Home Premium, 32-Bit operating system. Can you confirm the model number for me please? And your version of Vista is 32-bit or 64-bit?

  If you can answer these questions, I will try to provide you with further assistance.

  Kind regards

  BearPup

• Why lightroom keep freezing up after that I updated to windows 10?

  I recently updated my computer HP Windows 10 and now Lightroom keeps freezing upwards and unresponsive. How can I solve this problem?

  Hi nicholec87543213

  Please disable the use of the GPU in Lightroom

  • Open Lightroom
  • Go in Edition > Preferences > Performance > uncheck "use graphics processor.

  If you are using an AMD video card. Update to the latest version of your card. View Adobe Photoshop Lightroom Help | Problems with graphics cards 6 CC/Lightroom Lightroom and AMD | Win

  If she does not always allow to you uncheck the option, manually disable

  • Lightroom nearby
  • Go to \AppData\Roaming\Adobe\Lightroom\Preferences\LightroomPreferences.agprefs[username]C:\Users\
  • Open it with Notepad
  • Find the line "use AutoBahn" (use the CTRL + F shortcut)
  • Set to "false".
  • Save the file
  • Restart Lightroom

  Let us know if this helps

  Concerning

  ~ Assani

• RAID 5 volume is corrupted, RAW and not NTFS file systems shows now Windows can't read the Volume.

  RAID 5 volume is corrupted, files systems shows RAW and not NTFS now, Windows cannot read Volume, how do I convert to NTFS without losing data on the Volume. Raid 5 has been created by the Raid software

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Continuous freezing, can't read the DVD

  Hello

  I have a Pavilion ze 1230 and constantly have probems freezing. Gel means the cursor won't no matter how much I click or how long wait. I cut the power to solve. But sometimes it's nice for a long time, and it happens sometimes literally every two or three minutes.

  Another problem is that I can not watch videos online, so I tried to watch by inserting a DVD, but I can't do it either. The audio is generally OK, but the video is just a series of still images, and then soon it freezes completely.

  I brought this to a guy tech, a few months ago and he re-installed Windows, and when I got home, all the same problems were there.

  I have XP Professional pack 3 and only use my laptop at home, connected computer with the adapter.

  You can use the cooling if the laptop gets hot or if the fan is noisy.

  http://support.HP.com/us-en/document/c01657439

  Otherwise I would highly recommend you upgrade memory (hard drive seems ok).

• I can't read the dvd or cd in my pc drive

  I don knowt, what happened to my computer, my dvd player & cd do not work in media center or media player, I tried several times, but there is always a view that I don't have a drive in my PC. Help, please.

  Hi rubenespinas,

  1. not the problem only occurs when you use media center or Media Player files?
  2. you have made no changes to the computer before the broadcast took place?
  3. do you get an error message?

  Try the following methods.
  Method 1
  Run the fixit from following link:

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  Note: to do so: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

• I can't read the DVD

  Well I just reformated my computer and now it seems that when I try to watch any dvd it gives me the following message

  Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I tried to do what he says but it still gives me the same message, what I can do, I have already installed my driver graphic section management of device in the Control Panel, do I have to install other drivers and patches

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/Windows-Media-Player-cannot-play-DVD-video-you/a493ed03-4957-4DA4-95D5-474bb983d83f

• Blu Ray player can not read the DVD. It can read CDs and Blu Ray discs, but not DVD.

  Recently, I lost my hard drive.  Dell sent me a new disk with the drivers that came with the computer.

  I just noticed that my Blu Ray player is no longer playing DVDs.  I don't know if the hard drive crash has nothing to do with it, or if it's a coincidence.

  Windows says I have the latest driver.

  The computer is a Dell XPS 8300.   Is the Blu Ray player: bd - re bh30n hl-dt-st.

  The player has not served almost at all.   I read that there are the eyes for the Blu Ray vs DVD, then maybe the DVD part has failed.

  I'm always suspect that miss me a piece of software or a changed value.

  Any ideas?

  For all of you, the poor souls who shared my problem on the internet, I got beyond that.   Even though all said I had the latest driver, I found someone who said that they had downloaded a newer driver form the LG site and it fixed the problem.   Well, BH30N wasn't a model # on the LG site, but I found here: http://www.firmwarehq.com/download_1703-file_BH30N-A103.zip.html Norton said it was OK, I clicked on the EXE file, he said that he had me upgrade from A101 to A103 and suggested that I reload.   Once I did, my Blu Ray player will read the DVD fine.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• After you have installed windows on my notebook 10 notes all drop-down history menu and favorite tools have black background so can't read the text

  After installing windows 10 on my notebook that all drop-down menu history bookmarks tools etc. have black background so can't read the text

  It was much simpler that that I just check if my version of FireFox has been updated today it wasn't downloaded and everything beautiful. Thank you for everything that other gibberish "I also don't know solution but try this" typical in the forums with respect to proposed solution has no address or related to this question please

• can't see the Dvd rom after the Update window window 10 7

  can't see the DVD rom after the Update window 10 window 7.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

   

  Method 1: Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:

  a. type Troubleshooting in the search bar and click on it.
  b. click hardware and sound.
  c. click on Windows Media Player DVD and follow the instructions.

  Method 2: Uninstall, reinstall the drivers CD/DVD.

  a. press the Windows key + X , and then click Device Manager

  b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
  c. When you are prompted to confirm that you want to remove the device, click OK.
  d. restart the computer.
  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

  Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA