After that charge USB ELPH 100 HS does not illuminate

Canon Powershot ELPH HS 100 maybe peuvent wall loaded via USB (USB A/Mini B) cable, as some phones? He told me to charge the battery. It doesn't seem to be attached to the PC load. I used a Motorola Droid USB charger and connected to the camera with cable USB A/Mini B I briefly turned on and seen the icon of battery charge on the screen and off. A few hours later, it won't turn. I did the unthinkable and fried it?

You probably empty the battery. Remove it from the camera and use the charger supplied with the camera. The USB port is not a charge connector.

Tags: Canon Camera

Similar Questions

  • After that my virus clean my printer does not work I have windows xp and my printer Deskjet F 300 said

    After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help

    "they have installed?  You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?

    The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed.  Download and run the MGADiag tool.  If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP.  While they are at it, tell them to install a driver for your HP Deskjet F300.

    If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
    You have several choices to this page.

    • The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet.  As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
    • The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers.  HP has said, "not all product features are supported with this installation package."  I don't know what "features" are not supported if you choose this option.
    • It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included.  After things are installed, you can download and install the most recent of the 3 "Updates".

    When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all.  Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it.  (Note: remember "Step 4".)  "Step 6" refers to the directions outlined in the upper part of this post.)

  • After that effects and tests first CC does not start

    I downloaded the trial CC version to see if the products are good. Im trying to buy a sony vegas or adobe. This error message keeps popping up on both applications. It seems that the two are the same error.

    screenshot 2.png

    screenshot.png

    The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

    Details: http://adobe.ly/1QqMMc6

    Let us know how things work after installing the update.

  • After that Windows Update Setup, preinstalled Vista does not show genuine

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Validation status: invalid license
    Validation code: 50
    Code of Validation caching online: 0xc004c4a8
    Windows product key: *-* - F4GJK - KG77H-B9HD2
    The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =
    Windows product ID: 89578-OEM-7332157-00204
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.0.6002.2.00010300.2.0.003
    ID: {3024531D-D96C-49B7-8561-CA7E85C97887} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: Registered, 1.9.42.0
    Signed by: Microsoft
    Product name: Windows Vista (TM) Home Premium
    Architecture: 0x00000000
    Build lab: 6002.vistasp2_gdr.100608 - 0458
    TTS Error: M:20091102155059573-
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: 6.0.6001.18000

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {3024531D-D96C-49B7-8561-CA7E85C97887}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-B9HD289578-OEM-7332157-002042S-1-5-21-2396656831-1446850170-3657342363Dell Inc.. Inspiron 1520 Dell Inc.. A07 20080203000000.000000 + 00056313507018400EA10090409Time(GMT-05:00) Standard is03DELL M08 109

    Content Spsys.log: 0 x 80070002

    License data-->
    C:\Windows\system32\slmgr.vbs(1000, 9) (null): 0xC004E017

    Windows Activation Technologies-->
    N/A

    --> HWID data
    Current HWID hash: PAAAAAEABgABAAIAAQABAAAAAwABAAEAnJ8gzNrxki8kK2ZzXgqQc0aDujZSg7j78vS4qUYO3HWsViqF

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20000
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    REFERENCE DELL M08 APIC
    FACP DELL M08
    HPET DELL M08
    STARTING DELL M08
    MCFG DELL M08
    M08 DELL SLIC
    SSDT PmRef CpuPm

    Can someone tell me what I can do to fix this... I can't even download updates important either.

    * original title - bought my laptop with Windows vista already installed... I downloaded the updates and since I now get a warning telling me that the copy I have is not authentic. *

    "Walter the traveler" wrote in message News: b0ed436c-65f2-b-876 416 bis-2c40f9af74c5...

    Hey lindatrigiani7016

    advice given here by microsoft support are to republish these reports in authentic windows vista forum, where they can help you

    Questions relating to the Windows Vista Software Protection Platform - Non-genuine dialog boxes, problems of validation or software licensing services messages.

    http://social.Microsoft.com/forums/en-us/genuinevista/threads

    Walter, the time zone traveller

    In this case - certainly!
    It seems it could be a fairly complex problem, because at least there is a problem since 2009!

    --

    Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

  • Battery fully charged, but by Satellite U500 does not illuminate

    Hi all

    A year ago I bought a real replacement for my U500 battery. A few months ago the battery seems to go wrong (no charge), and as I was traveling I had no time to take it back to the dealer for yet another replacement. Last week, however, he started to work normally, all of a sudden - or so I thought.

    It turns out that the battery actually collected (he recharged from 0 to 95% in any one hour, and now the icon says "95%, no charging current"), but it won't feed the machine. If I pull the plug, the machine will die immediately.
    I tried to take the dough out and clean the contacts, but this doesn't seem to help.

    Any input on this is greatly appreciated. Thanks in advance.

    Shady

    I think that the battery is defective.
    You probably bought some sort of imitation product even if the part number would be the same.

    Many 3rd party online resellers provide China cheap batteries that are compatible (the dimensions of the battery are the same), but the performance isn't the best

    I think you need to replace the battery once more

  • Color Laserjet 3500 does not illuminate

    Hello, I have a HP Color Laserjet 3500, that does not illuminate. I replaced the power supply and the DC controller, but still nothing. When I hit the power button blinks the led on the Board of trainer, but that's all. The fan does not illuminate. Any suggestions?

    Hi oodletoodle,

    Welcome to the HP Forums!

    I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

    I hope this helps!

  • After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

    After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

    And this is not recognitze by any device, computer or iPhone 6plus.

    If you or the original owner did not have the password no one here or at Apple can help you.

  • Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

    I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

    If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

    Lightroom Journal | Tips and advice straight from the Lightroom team.

  • 30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?

    30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?

    Try reinstalling AAM.

    https://www.Adobe.com/support/downloads/detail.jsp?ftpID=4773

  • When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

    When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

    Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata

  • After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

    I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

    Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

    TT2

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft. Please notify.

    Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft.

    My Toshiba Laptop Windows XP Media Center OS is currently being updated with the exception of a point to update MS Office 2003 #KB949074

    has no size to him.

    Please notify.

    Kind regards

    Adolph Moret

    A call back to Epson says my Windows Firewall blocks printing Epson Status Monitor and by disabling the firewall every thing returns to normal.  Turning on the firewall without exception is still no difference and I should contact Microsoft for that matter.

    If the application works when the firewall is disabled, but not when the firewall is turned on, so you must create an exception for the application.

    I don't know what you mean by "turning on the firewall without exceptions still makes no difference" - no difference of what?

    You must determine the name of print Epson Status Monitor, then go to control panel > Windows Firewall (if your control panel is using "Category view", you will find Windows Firewall in the Security Center).

    Once in the Firewall dialog box, click the Exceptions tab, click the button "Add a program" and find printing Epson Status Monitor.  If it is not in the list that appears, click on the button "Browse".  After selecting the program and click OK, make sure that on the general tab of the Firewall properties dialog box that the "do not allow the box exceptions" is NOT checked.

  • After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

    After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

    New Aspire E11, Windows 8.1

    Help, please.

    Here is how I fixed it:

    Go to control panel > network and Internet > network sharing Center

    Click on "Change adapter settings" in the left pane.

    Right click on your map. Select "Properties".

    There will be a box titled "this connection uses the following items."

    Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

    KEEP THESE CHECKED:

    Client for Microsoft networks
    QoS Packet Scheduler
    File and Printer Sharing
    IP v6
    Internet Protocol v4
    Driver Link-Layer Topology Discovery map IO
    Link-Layer Topology Discovery recall

    Uncheck everything else.

    Go to network and sharing, disable and re-enable the adapter.

  • BIOS updated after uninstalling the printer software, now Win7 does not! Help!

    I just uninstall software ago 2 nights for my Officejet HP8500 and after reboot, I was invited to the update of the BIOS (?). After that it ran its course, I can not get Windows to load. it freezes at the home screen after entering my password.

    Help, please. I have nothing but uninstall the HP software and reboot (which she asked me to do).

    Hello

    (1) once the unit is on keep tapping F8 key control if unit loads in safe mode try to do a system restore.

    (2) if the unit will not charge at F8, you can try to load to F11 option also and try to restore the system here as well.

    (3) if unit is not loasd to two option please try F10 or F2 option run the hard drive & memory test and let me know the results.

Maybe you are looking for

  • Libretto w100 impossible to install kaspersky

    Install kaspersky, happens to the license page and freezes.I uninstalled mackafee and windows defender but still of accidents.Any suggestions?

  • Read value request chart

    I've searched for this idea for a long time. Right now I use a manufacturing build .exe created in labview. I downloaded the .llb file to change the program to my goal, but I can't find a way to do as I want. Basically, this program measures and upda

  • Re using Vista

    former dead installed vista laptop in 2nd hand laptop

  • Camera API to crash after update to build 671

    Hello My app made use of the camera and then a few days ago I updated my device alpha Dev to build 671 (from 543) and my app out erros and accidents with the following result. Initially, I received my example in the sample PhotoBomber. I tried to run

  • BlackBerry 9000 "BOLD" Smartphones software crash

    Our company has some Blackberry 9000 "BOLD" (with the top of the page mail and mail easy) Each phone has suffered some crashes (fortunately rare) during normal operations: the led turns red, the black of the screen and is necessary to remove the batt