After that I turned on my pc what I see is desktop backround, no icons

Similar Questions

• In Lightroom, after that I turned my RAW files to DNG can I delete the original files?

  In Lightroom 5, after that I turned my RAW files to DNG can I delete the original files? I am fill hard drives at time (or so it seems) and I remember someone once telling me that after I converted my dng files RAW versions, I could delete my original RAW files.

  Is this true?

  Ideas?

  Entry?

  Thank you!

  Yes, you can remove the original RAW files once convert you them to DNG. The only downside is that if you want to use the software from the manufacturer of the camera for a reason, so key information that can be used by the software manufacturer is deleted in the conversion from RAW to DNG.

• Why will my router stops transmitting the internet signal after that I turned off the host computer?

  Hi members of the community.

  first of all, my setup:

  modem - router (wrt320n lynksis, yesterday I uplodaded latest firmware - it does not help)---(par câble), PC (windows 8)
  l
  l
  various devices (cable TV, wireless: laptop computer (windows XP), phones (Iphone, android, phone etc.))
  Second question:
  Until now, I had no problem with router, but as I connected the new PC, with windows 8 is installed, the router, I began to encounter the following problem: I turn the host computer (wired, PC with windows 8) off after a minute or two the router (if not always on) continues to transmit the internet signal with other devices (wired (TV) and other wireless).  What's also interesting is that, when I unplug the PC from the router ethernet cable (when the PC is turned off), the router begins to function normally. Why and how to fix it? It seems that the PC would stop the router in the transmission of the signal.
  I would apreciate any help I could get. Because the router is working otherwise fine (when the computer host is turned on when the PC is disconnected from the it), I guess it has something to do with the windows configuration.
  Thank you all,.
  Sincerelly, Janez

  Hi there... we have a different router, but I had exactly the thing happens to me when my husband bought his new computer. After hours of technical support that gave no results of our router manufacturer, I did some research on the web, a vast and I think I found the solution.

  Go to control panel > system and security > system > Device Manager > network adapters > find your network card (mine says in time real PCIe GBE) open cela, go to power management and uncheck the BOX allow the computer to turn off this device to save power.

  After that I did that my router is no longer turns off/goes to sleep when my computer is. Offshore.

  Give that a try, and if all goes well, it will help you too.

• After that I turned off my computer when I turn on it can not lighting. I have to disconnect for 24 hours and it starts to work aigain

  I cann't turn on my computer after I turn it off. What is the problem? Can you help me?

  Sunday, October 21, 2012 17:14:52 + 0000, katherinebacha wrote:

  I cann't turn on my computer after I turn it off. What is the problem? Can you help me?

  It is a hardware problem, not a a Windows. You must get the
  repaired computer.

  Ken Blake, Microsoft MVP

• Satellite L450D monitor wouldn't turn on after that laptop turned on all night.

  Hi guys,.

  Just a quick query... I just left my laptop computer on all night, the monitor is set to turn off the display after 5 minutes of inactivity. When I tried to go back on this morning the display will not turn back... I had to stop the pc with the power button.

  Is this a common problem? Is there a way I can avoid this in the future?

  Thank you very much.

  Hello

  Maybe you could avoid such symptoms may in the future by upgrading the graphics card and BIOS update driver.
  I read in the forum that some people had this similar problem but they show pilot help

  See you soon

• Photostream photos disappeared after that I turned on iCloud photo. Would appreciate advice here. Thank you

  I turned on iCloud photo, now, all my photostream on my iPad photos have disappeared. These photos come from an old iPhone that has been abandoned since. Is it possible to recover these photos photostream?

  Are they gone completely or only associated in your iCloud library? See the quote below: get help with your iCloud photo library - Apple Support

  What happened to the album of my photo stream?

  When you turn on iCloud photo library, all your photos and original videos are organized in a library. My Photo stream download these latest photos to share with your devices that do not have iCloud library enabled.

• How to get rid of Microsoft Visual C++ Runtime error at startup. Sometimes after that I turned on the computer before you open any program.

  Once I turn on the computer and before I opened a folder/file/program.

  The box says;

  "Runtime error!"

  Program: C... »

  So I have no idea what program it is. As I know there has been no new program loaded, but it's my wifes computer, so I can't be sure.

  Hello

  Try these methods and see if it helps.

  Method 1:

  Step 1: Start in safe mode and check if you get the error.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Clean boot

  Perform a clean boot to verify if a third-party program or service is the cause of the problem.

  Refer to this article for more information:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:

  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Method 2

  I suggest that you try to run the System File Checker and see if it finds all of the corrupted system files.

  (a) click Start

  (b) type: CMD, according to the results, right-click CMD

  (c) click 'run as administrator '.

  (d) at the command prompt, type: sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Dv7t-3000 Black Screen after that the Bios flash (Bios CORRECT) what are my options?

  Hi, I have a dv7t-3000 and recently, I installed windows7 ultimate and so I started to install all my drivers to catch up with my laptop. I flashed my bios and the computer went to reboot and installed 76 updates before you stop. I went to bed and woke up and when I turned my count on the screen is BLACK. Without backlight or nothing. Leads to come, wireless is disabled, I hear the fan and do not know if the hard drive does not work. I don't see why it wouldn't. I tried a HARD reset and taking the ram and put it back in. Neither have worked. I even tried to hold the windows key + B when the computer turns on but no luck. Any ideas? Any help would be greatly appreciated.

  Fixed it by resetting CMOS battery. =)

• How do I resize my screen after that that a program has changed the size of the screen?

  I used a program to connect to a projector, which made the screen smaller. After that I turned it off, it wouldn't return to normal size.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Firfox is always loaded on my computer, but does not open. Would not open after that I did a restore (have XP).

  I did a restore (Windows XP). After that Firefox would not start. You can see the "Hourglass" for a second, but nothing happens. I tried the Mode SAFE Start and it wouldn't work. I went into the program file and tried to open with the .exe of the fie. Nothing, I don't don't want to lose my favorites by installing a new version. I have tried creating a new profile becauae I don't know if I can do it right or even if it would work.

  Would appreciate any help. Thank you. Bearcat78

  Hello Bearcat78.

  I advise that you think... a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. But it's not too difficult.

  Note: You can print these steps or consult them in another browser.

  First, save your profile by saving a copy of the profile file... See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Sound seems to be decreasing after that I have used headphones, or turned down the volume.

  I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
  I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

  Hello

  1. What is the operating system installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article, and check whether the problem is resolved or not.

  No sound in Windows (Windows 7)

  Note: this also applies to Windows Vista and Windows XP

  Hope that helps.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP G62 - b26SL: laptop turning off suddenly. After that, no way to put running, for days.

  Hello. A few days ago, my laptop suddenly off and after that there is no way to do marketing! The button was just clear up for a fraction of a second and then nothing else. I tried to turn it on several times, but not at all, it was all the same. So, I removed the battery and replaced again, but not way: the laptop was dead air! I retried to swich on the next day, but I had exactly the same behavior: a few flashes of the switch, then nothing else. A few days later, to assess, I knew not what, the laptop turned on and it seemed running! Once again, after a few hours of operation, all of a sudden it turned off and no wy to get running. Hystory repeated until yesterday, where at one point he turned on. Now, it seems running, but I don't know until when. What I've done so far, it was just to update the BIOS to the latest available. Then I ran the diagnostic tools, and all was going well run. So I'm a little confused... Does anyone know about a similar behavior? Can anyone help this issue? It may be the last post I write from my laptop. Thanks in advance for your reply and your time. Mario.

  Hi @spream01 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your laptop HP G62-b26SL and stop. Here is a link on the reduction of the heat. There could be something useful in the fan that blocked such document.

  I recommend to restore the default settings of the BIOS with this document by selecting the reload the default BIOS settings. This will have the BIOS check the connected equipment. If an update has changed the BIOS that it will restore and generally solves all problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Have you installed new hardware on the laptop?

  Please let me know how it goes.

  Thank you.