After that latest windows update get his code error 1068 not starting - also generator of audio endpoint of Microsoft is giving a code of error 80070003

After that the latest version of Microsoft Plus sound and does not start the Windows Audio service cannot start code error 1068 also fact generator Microsoft audio endpoint is giving an error code 80070003 so did all that was stated and when I did a restore before the update from the update started so is there another way to initialize the sound I have a hp pavilion a6010n my twin sister gave me that I've already tried what was suggested in other messages ty for your time again already tried the other ways is there a service that I have to certify something anything I need the sound back it works too much Ouch ty

Hello

I suggest you follow the steps mentioned below:

Method 1:

Reset Windows Update component and check if the problem persists. Follow the steps in the link:

http://support.Microsoft.com/kb/971058

Method 2:

Download and run the update of the system since the link tool and check if the problem persists:

http://support.Microsoft.com/kb/947821

Tags: Windows

Similar Questions

  • I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

    I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

    Hi Nita,

    Thanks for posting your question in the Microsoft Community forums.

    The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

    I suggest you try the procedure described in the article and see if it helps.

    Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
    http://support.Microsoft.com/kb/956706

    Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Background problem funds after that automatic Windows update download.

    This morning my laptop, running Windows XP, was at the login screen, as if he had revived by himself--he had a message that windows had downloaed and installed an update of important security and need a re-start, which happened automatically. When the office came, instead of the blue background wallpaper Windows I use, the backgropund of the Office was white. All icons were there, but he was white instead of blue. I tried right click to get the display settings > desktop > and all the choices for office appear with a white background instead of the whatever they are supposed to be. Any help is appreciated.

    Hi Marc G J
     
    Welcome to the Microsoft Answers site!
     
    (1) do you mean to say that even after changing the display settings, you get a white background or the ability to change the display settings is grayed out?
    (2) who is the update you have installed?
     
    The first step, I suggest you is to try to go to safe mode and see if you can make the changes in safe mode.
     
    This can be caused due to malware or virus infection. I suggest you
     
    Run a full system virus scan and malware scan to check any virus or malware cause this behavior.
     
    Do a full scan of the system with the Windows malicious software removal tool and search for malicious software present on your PC.
     
    Microsoft Windows Malicious Software Removal Tool to help remove malicious software spread specific computers that are running Windows 7, Windows Vista,
       
    Microsoft Windows Malicious Software Removal Tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000
     
    http://support.Microsoft.com/kb/890830
     
    Also read the article of Vincenzo Di Russo on how to get rid of malware.
     
    This can also be a problem with a corrupted user profile.
     
    You can access the link below and create an new user account and see if the problem is resolved.
     
    http://support.Microsoft.com/kb/279783

    If none of these solves the problem, you can do a System Restore to return Windows XP to a previous state when your computer was functioning correctlyand then hide the particular update manually.

    Access the link below for how to do a system restore.

    http://support.Microsoft.com/kb/306084

    Hope this information was useful.
    Concerning
    Varun j: MICROSOFT SUPPORT
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Restart after that a windows update problem with VirusScan from McAfee (total Protection)

    I'm under 64-bit Windows VISTA Home Premium SP 1 on a Dell Studio 540 desktop.  8.0 GB RAM.  Intel Core 2 Quad Q9400 CPU @ 2 .66GHz.
    Late last night, I started the PC to go online.  Shortly after, I was invited by Windows update to restart.  So I closed off everything and rebooted, except that I kept scheduled analysis of McAfee, which I set up for Fridays.  I have McAfee Total Protection, which includes VirusScan.  That the PC would shut down, there was a message on the screen of McAfee who said, essentially, stop this scan before restarting.  I'm paraphrasing - I didn't write down the exact message.  After reboot, I started again the background anti-virus scanning.  After a few minutes, I received the following message:
    Microsoft Windows
    Order McAfee VirusScan Scan - Are asked to work and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.
    I have not received a solution of Windows.  I completely uninstalled McAfee Total Protection, following the instructions of McAfee, then reinstalled.  Everything went very well with these processes.  I have yet to receive an indication of the McAfee software that something is wrong.  After the reinstallation, I tried a scan, but got the same error message as above after a few minutes.  It does not occur immediately, analysis continues for about 5 minutes, then abandoned.
    Chatted with Dell today.  They suggested a system restore, I will try then.

    What updates have been installed?

    During certain infections that are designed to defeat security software will cause the bomb on analyses with an error.

    I also suggest you contact the McAfee Support since it is their product which blocks.  http://service.McAfee.com/TechSupportHome.aspx?LC=1033&SG=TS

    To view installed updates:

    1. click on start > Control Panel > Classic view > Windows Update.

    2. along the top, click view update history.

    3. click on installed updates

    4. you can sort by name, status, Type, or Date updates. You can also click on each update and select Show details to access the details of this update.

    Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »

  • Is there another difficulty to break the Visio Viewer after that application Windows update KB973525 also uninstall this security patch?

    After the Windows update KB973525 has been applied to the PC with Windows XP SP3, Visio 2003 Viewer, and 2007 will not come upward.  It displays only a white screen with a red X.  If the update is uninstalled, then the Visio Viewer works.  The update is a security fix, and we want to keep this update installed.  Does anyone know another way to solve this problem?

    Hi Tdiphoffman,

    Thank you for visiting Microsoft Answers.

    I suggest you to install the Microsoft Office Visio 2007 Service Pack 2 from the link below:

    List of all the system of Office 2007 Service Pack 2 and Windows SharePoint Services 3.0 Service Pack 2 packages

    http://support.Microsoft.com/kb/968170

    Then install the update of security for the Visio 2007 Viewer from the given link:

    http://support.Microsoft.com/kb/973709

    If this does not help, you can also contact the support for Microsoft Visio Viewer for further assistance.

    http://Office.Microsoft.com/en-us/help/FX100485361033.aspx?pid=CL100605171033

    Link to view:

    Visio 2007 solutions Center

    http://support.Microsoft.com/ph/11389

    Check out this link where the user had a similar problem:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a3a53101-ed31-4b59-9102-df7848143bcd

    Hope the helps of information. Please post back and we do know.

    Kind regards
    Joel S

  • Windows updates installed and now I can not start vista normally

    Hello, I have a problem starting my OS after windows updates to install. I have a laptop Dell Studio 1737 running Windows Vista SP1 x 64

    I installed the windows updates and they are normally installed on the closed part (steps 1 and 2 of 3) but the computer restarted once he ran Microsoft Corporation with the Green loading bar animation. He hung there for quite a long time as usual but I thought it had to do with updates. so after that the animation, the screen off, turned back on and it was completely black. a mouse jumped out for about 10 seconds, then disappeared. I noticed that the hard drive light stopped flashing and there is no other activity after that. CTRL-Alt-Del does nothing. So I had to hold the power button and restart. This time I used Safe Mode to let it boot. He traveled the drivers being loaded and hung up "pilot charge: \SystemRoot\system32\drivers\crcdisk.sys ', but eventually started. After starting, it linked the part "Configuring updates step 3 of 3" 0% to 100% and then just stood there and the mouse began to blink. Yet once, there was very little hard drive being indicated by light activity. After 5 minutes, it was clear, he was not any progress made by letting it continue. Yet once, forced another shut down.

    I repeated the process with the same results from the point to let start normally to force stop and meet at configuring updates step 3 of 3 to 100% but frozen in safe mode. I was perplexed what to do because I could not access the computer at all even in SafeMode! I forced the closing down and grown up recovery tools and tried to startup repair. has nothing. I tried the system restore. It is interesting that told me I had NO restore points and yet I had just installed one small not updated but there is 30 minutes. Also, I can't imagine there is no restore point after having owned this laptop for almost 4 years. I took to my faithful Tablet for some Google-ing in depth on this particular issue in the hope of finding a solution. Well, I came across an article that leaves me at least cancel the thing trying to get up-to-date and freezing. It required that use you recovery command prompt and delete the C:\Windows\winsxs\pending,xml file. After the reboot (in safe mode) Finally I could connect and access my files save them! Finally! only it isn't the end of the problem. I still cannot start normally. to do this, the above-mentioned actions of when I try to boot normally.
    I tried so much google - lies about different things, it might be and who either do not resolve problem or steps they indicate to tell me to change a registry entry to something which in my machine is already what they say before it takes. Also, I can't uninstall updates because the windows update program does not open in safe mode. I have run chkdsk and nothing. I stopped everything to boot at startup, with the exception of microsoft. I uninstalled any program that can run at startup. I ran an anti-virus (Avast & Norton separately) and lift you own. I have a ntbtlog.txt I can post if necessary. honestly, I don't know where to turn at this point, except for here. If no luck here ill get my backup files, take my computer to a local store and have them diagnose or if worse comes to the worst case, a clean format and reinstall that is not presented.
    Thank you for any advise on this issue, as I don't know what to do next.

    What I did I tried to disable the network, modem and audio drivers. It took time, but start normally thereafter, but he made a strange (and continuous) boot process he never has ever done before. Once in normal mode, I started to allow the drivers one by one and it turned out to be one for the audio driver to date. During this audio driver was activated it will disable all entries as the trackpad, keyboard, USB and particularly hard drive! so it would freeze almost instantly after activation there and closes one forced would be necessary. Device Manager Microsoft told me this audio driver was updated, but it wasn't. The company that provided the audio drivers had changed the names through the merger or buyout, or something and the new audio drivers were under the new name. A very strange situation.

    I had to search around and eventually find the latest drivers for my system setup and audio on dell's website, and it said it was a "Recommended" update This update of the driver should be mandatory if you want to continue using your computer! It is one of the most used audio dell service providers! Why he would only recommend?
    In any case, thank you Jeremy for your time and help!
  • Skype no longer after these latest Windows update

    Hi, I just installed the latest update of windows (in windows) and when he finished and my reloaded portable Skype would no more, launch only telling me that he had stopped responding.

    Name of the failing application: Skype.exe, version: 6.14.60.104, time stamp: 0x52f9216a
    Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
    Exception code: 0x8000ffff
    Offset: 0x0000c41f
    ID of the process failed: 0x1a34
    Start time of application vulnerabilities: 0x01cf66eb588c5bc0
    The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
    Report ID: 9b599922-d2de-11e3-93a7-94dbc948f62f

    Here is the log of the event viewer.

    Thank you

    Skype will not work if Internet Explorer is broken.

    Try now to IE11 uninstalling and reinstalling IE9.

    In order to uninstall IE11 you should go to the Windows Control Panel-> program and features-> view installed updates-> Microsoft Windows-> Windows Internet Explorer 11.

    http://techdows.com/2012/11/how-to-downgrade-from-IE10-to-IE9-or-IE8-Windows-7.html

  • After that the Windows update, Mozilla does not work.

    After an update of windows, Mozilla Foxfire does not work. I can type in the address of the site, I would like to see, and absolutely nothing happens after clicking on "search"... It makes me wonder if the update of windows had something in it that blocks for the internet mozilla foxfire 'explorer '...

    Try to start Firefox in safe mode:

    You can also try resetting Firefox to default settings:

  • my pc deleted after that recent windows update (September 8, 2011)

    Im running a pc using windows xp pro (if I'm not wrong) and this is my work pc so I really need your urgent assistance.

    My problem is that yesterday after completing my work I left it open and when I tried to close it later that evening, I saw there is an automatic update waiting to be installed. So as usual, I have chosen to stop after update install & let it do its work. The next day, when I turn on the pc all seems ok, but after the window logo download page I have to wait for about 1/2 hour before the appearance of my newspaper in the console. After entering my password the console disappear and nothing on the screen. The only thing that's on the screen is my wallpaper. There is no taskbar, no start menu, no desktop items, nothing. I can access the Task Manager by pressing ctrl + alt + del, but same thing, it took me like ages before it appears, and I realized that there is no explorer.exe running. When I tried to run explorer.exe this message "Windows cannot access the specified device, path or file. May not be the appropriate permissions for access you to them.

    I tried rto run chkdsk via the cmd prompt and it detected there is a problem with the file system and ask me to run chkdsk /f. But I can only perform after a reboot, as it is said there are program using the volume. Yet once it would take me ages to wait for reboot start (I did it using Task Manager) at startup windows run the chkdsk command it t wen smoothly as there is no problem, but still the same problem happen where I have to wait an hour before the appearance of the console connection and after connection nothing is there.

    I suspect it might occur due to the new update that microsoft will invite me to install. I don't know what update, now I just ask to install before shutting down. I don't know if it's a virus or something, but currently I am using trend micro internet security titanium & ad-aware and on my final analysis there is nothing major execpt for some cookies. Can someone guide me if I could go back to my pc or uninstall the updated windows install for me? If I am not mistaken my pc ever point backup restore & never all together. I can't afford to re - format or reinstall windows because all my file work & work related email (outlook) are in the pc.

    Help, please!

    Hey James,.

    Thanks for the suggestion earlier, but none of these work for me. Ultimately I have back to the top of my old hdd to plunge into another pc, backup all data and reformat the entire hard drive.
    Anyway thanks for the help & appreciate your response.
  • 8 app Windows do not work after that a Windows Update has been applied

    Hi, I installed windows 8 this morning and everything worked. Then it applies updates and now none of the applications really work, instead I just get a white screen and app store just gets stuck while loading. Any suggestions?

    Thanks Scott

    Hi thanks for all that. It seems it was my Kaspersky Internet Security 2013... Uninstalled and reinstalled and now everything works

    Thank you very much
    Scott
  • After that usual windows update 5.7.1 Lightroom 64-bit does not work

    Hello. I turned on my computer and it began with the usual stupid updates. After the update, the first thing I did was open to the top of lightroom. Lightroom came with a window in front of it saying "Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts. "The only thing you can do is to click on 'Ok' when I do both this window and lightroom closes. I open lightroom several times only to have the same problem. I uninstalled and reinstalled, same problem. I restarted my computer, the same problem. I just use lightroom yesterday without any problem. I have 10 windows and that you've had for a while now. I have no idea what updates have been, but I know it's one of those usual often happens when you turn on your computer. Anyone know what's the problem? And how to fix it?

    This is not related to the update of Windows, the error message means that your preview cache is corrupt.

    With Windows Explorer, navigate to the folder containing your Lightroom Catalog, usually inside the photos / Picures my file.

    Delete the folder with the name ending by Previews.lrdata. Do not remove anything else.

    Now, launch Lightroom and previews are rebuilt when you browse the library.

  • Satellite P105-S6197 - after that the Windows XP Home edition installation DVD is not readable

    Hello everyone (sorry for my English) :)

    I buy Satellite P105-S6197 with Vista Home Premium (RUS). Immediately, I formatted the HARD drive and installed WIN XP PRO without any problem. All drivers installed, correct and in Device Manager have no unknown devices.

    But after the operation my Win XP does not read the DVD, CD - no problem. I try to boot from any bootable - no success DVD, disc not reading. In the BIOS I normally see information DVD player.

    What can I do to diagnose my problem?
    Maybe some MS updates, update BIOS...
    Please help me :)

    Hello

    I wonder what site Toshiba driver did download you the drivers?

    Mhhh is s a Toshiba model we designed and delivered by US.
    Thus, you should use the Tosh site to download driver.

    I have check the pilot US page didn t find the XP drivers and it's one reason why I asked.
    I would recommend when even update the Win XP OS on the latest state. This means that you should visit the Microsoft site and should perform a patch test!
    http://update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

    Please note that, sometimes, several start-up procedures are required to install all the patches

  • After Windows update to bluescreen 1033 error on Toshiba

    I have a Toshiba laptop Satellite Pro L740 and under Windows 7 Pro.  After that the Windows update yesterday, I got a blue screen on startup with the following message:

    Signature of the problem: BlueScreen

    OS version: 6.1.7601.2.1.0.256.48

    Locale ID: 1033

    BCCode: a

    BCP1: 0000000000000000

    BCP2: 0000000000000002

    BCP3: 0000000000000000

    BCP4: FFFFF80002EACF74

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 256_1

    Startup Repair to restore my computer by removing updates.

    Why do I receive this error on Windows update?  What should I do to fix the problem, so I can update?

    Thank you.

    Hi Debbie,.

    According to the description, you get the blue screen in Windows 7.

    1A what situation you get BSOD (blue screen of death) errors? That you get when you work on a particular application/operation or it occurs randomly?

    2. did you last changes before the show?

    See the link below for trouble below to resolve blue screen issues:

    Method 1)

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    , Note 1: Back up your data before reinstalling Windows 7.

    Note 2: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

    Method 2) run Microsoft Safety Scanner to check any Virus infection:

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

    Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

  • Error code 2 while installing KB2160841 latest Windows Update

    Repeatedly get an error Code 2 (Windows Update encountered an unknown error) when trying to install a part of this massive update week game - problem is specifically with KB2160841. Have tried several times over and over again after a reboot. Have also downloaded the specific update (NDP40-KB2160841 - x 64 .exe) - and when trying to install this error message "KB2160841 does not apply, or is blocked by another condition on your computer.".

    Any ideas how to solve this problem and get KB2160841 successfully installed?

    Thank you

    See: http://social.answers.microsoft.com/Forums/en/vistawu/thread/ee945c20-a8c1-4b82-9b4c-d6dfae4c5337

    Error code unusual for this particular update.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • While trying to install windows updates, I get an error 57F Code - Windows Update encountered an unknown error.

    For months, that I tried to install windows updates and continually get 57F error Code - Windows Update encountered an unknown error.  I'm now 9 updates important and 2 Optional updates that have failed to be updated.  I am running Windows Vista Home Premium. Help, please!

    Office 2007 are in guess some updates.

    1. ensure that you are logoned on with an administrator account and that the computer can access the Internet properly.

    2 - Insert the Office 2007 CD drive of the computer installation CD, then check if updates Office can be installed.

    Did you use a registry cleaner?

    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for