After that put 36.0.1 to date, does not connect to internet

Similar Questions

• After that upgrade to 36 my Windows 7 does not connect to internet - IE works fine

  My laptop 7 set to level windows works fine.

  it412g Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• After that recommended BIOS upgraded satellite a series does not start

  During the recommended BIOS Flash upgrade of the system came in suspended state.
  I waited 1 h before trying to restart the laptop, I had to do with force by removing the battery.
  Now the system does not even show the bios screen. Is there a way to fix this problem?

  Hi Tom

  Obviously something went wrong with the BIOS update and now BIOS is damaged.
  I'm afraid there is nothing you can do except to authorized more close contact and ask for help.

  I'm sorry. :(

• I changed the ink in my printer, it worked twice after that, but now the ink lights. Does not print.

  The printer is an EPSON multy 3 in 1 NX100series Stylu.

  Contact Epson or check their support website to see what could be the problem.  This indicates a hardware problem with your printer, not a Windows problem.

• KB976325 update does not connections to internet sites after installation

  Update cumulative security for IE 7 for XP, KB976325, is always my IE guarantee so I can't access any websites.  My only solution is to uninstall the update.  I had to change my update settings, so I can choose which updates to install so that it stops the installation.  Can someone tell me why this update won't allow me to access the internet after the installation?  Also, I can't use Firefox because of an update but I can't understand that one.

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated!  If you use a free ZA firewall, you may need to uninstall instead of disable.

  NOTE: If KB976325 is NOT installed, go to step 4.

  2 uninstall 'Security for Windows Internet Explorer 7 (KB976325)' via Add/Remove Programs (make sure the box show updates at the top right) and restart.

  3 d - c #1 above.

  4. go to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g. KB976325).  If an update of root certificates is listed in the category of the optional software updates on the left, install it to enjoy greater security of IE7.

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to restore the backup on iPhone 5 s after 9.3.2,and if my phone does not connect to anything?

  Yesterday, I received 'update available', and so without thinking I just did.  Today my phone will load a web page not (Wifi or cellular), I can't turn off find my iPhone because my password can not be verified, my mailbox is not updated and my messages are all coming through an hour after they are sent.

  To do this, I'd go straight to reset network settings.

• How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

  Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

  I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

  Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

  Thanks in advance for your help.

  Hello

  Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

  

  And the USB cable is similar to the following:

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

  The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

  Kind regards.

• My Blu - Ray player does not connect to internet at all after the firmware update

  before the update, I use to be able to connect to the internet, but now, it says there was a problem one can not connect. Help, please!

  RESET the unit to FACTORY settings?

  Perhaps this is an option, which will get you to where you were before the update.

• D7000 will not connect to internet after reinstalling

  Hello

  We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP did the same thing, without effect. The phone line has been tested, it's ok. I swapped the cables to make sure that they are not defective. I moved the modem to return to the old location, but now it does not work there either.

  WiFi seems to be ok and all our devices (phones, tablets, computer) recognize the wireless network and modem, but there is simply no internet connection. It is bizzarre! Nothing has changed, there is no new hardware, no updates or upgrades, the ISP is always the same, the only thing that differs is the location, in the same House.

  The lights on the router modem are as follows:

  Food - white

  Internet - amber

  DSL - off

  WiFi - white

  Any ideas what I could try to make it work again? Should I do a factory reset on it? This could be the cause? Move a modem do not stop working. We only had since November so it isn't old yet, and it has been working fine so far.

  Any help at all would be greatly appreciated!

  Päivi

  Hello

  It has been a while now, but I thought I would update this for anyone interested or affected by the same problem we did.

  After weeks of back and forth with the ISP and try and test anything and everything we could think, including the replacement of the D7000 in store warranty (not just once but), and nothing is helping, the ISP finally filed a foul for us and sent a CET. And what do we know? There was a flaw in the riding of Telstra which he had found, and which caused our internet connection fails. After that which has been set, we are online again. The line still falls here and there and the phone line is cute, but at least we are connected.

  And now I'm fighting with the ISP for refund during all these weeks we were disconnected while they refused to be a mistake for us and have someone out. Time for a new ISP, I think!

  Hope this helps someone else with the same problem there.

  Thank you

  Päivi

• Ethernet DHCP fails after that put 10.11.3 updated

  Hello

  After that the updated 10.11.3 updated my ethernet connection fails to connect to the internet.

  The general link is fine; router OK, other computers will work properly; DHCP works for iPhones, iPads and WiFi on this computer are great

  • I have tried several things from other threads.
  • the cable is connected
    • but I realized during disconnection of the cable as the IP address and the subnet mask disappear (as must I guess) to reconnect the cable, it takes a few seconds and I have again the values for both:

  IP 169.254.159.37

  subnet 255.255.0.0

  The connection says it is a self assigned IP address, but there is no connection to the internet.

  Any ideas?

  (Is there a way to reset/restart the DHCP client service for individual cards?)

  hardware problem identified with switch that solved the problem

• BlackBerry 10 Z10 is connected to the car via a Bluetooth Handsfree link do not provide information on the song after that put 10.2.1 update.

  I use a Z10 for about 6 months and I connect the phone to my car (a Honda Civic 2012) via the link to the Bluetooth hands-free kit to receive phone calls and play songs that are stored on the SD card in my phone. When I play a song, the song title, artist and album information are displayed on the LCD screen of my car. However, after the update to 10.2.1 this morning, information about the song does not seem be sent to the car. Any song that I play, the car screen says 'none' for the title, album and artist. I can still "scroll" even though my songs from stereo console of the car using the buttons back and forth, but alas, no song information is displayed. I restarted my phone several times, remove the Bluetooth connections on my phone and the car and then reconnected, but no dice. I must admit that I am really annoyed on this subject. It's pretty basic things. Does anyone else have a similar experience?

  Hello and welcome to the community!

  I can tell you that on my Civic 2013, this problem does not exist. Other current issues from time to another avec.1925, but not the problem you are reporting. Thus, I would suggest you clear your pairing Civic, reload your BONES of BB10, then try again.

  Good luck!

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader.

  I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you

  Run Windows Update - it may install drivers that does not get installed on Windows 7 home.

  If this does not help, look for Windows 7 drivers for this device on the Sony web site.

• A date does not

  I'm working on an application that performs work once per day.

  As part of the testing process for applications that use this feature, I usually go to settings-> Date & time

  and auto power off. Then press on set Date and jump to the front, the day by one or two, so that I can simulate a day pass and see that my application is properly.

  On this device (Motorola Admiral) when I press on set Date I get the dialog box date picker, just as expected. However when I select a date and press the set button this date does not appear to be stored correctly.

  Sometimes, the line below "value date" which shows what is scheduled to be updated correctly and indicate the date that I have just entered. But other times it will just display the current date. And in each case if I back the settings even this system that is the current date instead of the date to which I have just entered.

  Anyone can do the light on what I need to do to be able to properly set the date manually on this unit?

  It's a strange thing, I'll have to check this on my Admiral later when I get home.

  What happens if you put the phone in airplane first mode, then go into the settings and turn off the automatic time & date?

  What you enter him will they stay?

  Thank you

  J

• Error: "C:\Program Files\FileName\filename\unis000.dat" does not exist and cannot uninstall the program

  Original title: How can I removed the programs installed that I tried to uninstall, I get a message file does not exist can not uninstall what I do next

  Hello, well this is not the only program file I have in my list of programs in the programs and features. I get the same message when I try to run uninstall them. I get a red alert response in a separate box. This warning;  File "C:\Program Files\FileNmae\filename\unis000.dat" does not exist can not uninstall.

  Hi LuckySafeHaven,
   
  -What version of the operating system are you using?
  -With what program to this problem?
  -What is the name of the file that is mentioned in the error message?
   
  unins000.dat is a library of dynamic links associated with malicious software (dll). Legitimate dll files contain a set of executable functions that can be used by Windows applications. The dll associated with the malware containing malicious code that causes damage to your PC.
   
  Try to remove the folder/filename mentioned the location C:/Program Files.
  Scan your computer to remove malicious software.

  Do a full scan of the system with the Windows malicious software removal tool and search for malicious software present on your PC.

  Microsoft Windows Malicious Software Removal Tool to help remove specific prevalent malicious software from computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000. After you download the Microsoft Malicious Software Removal Tool, the tool runs one time to check your computer infections per prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove infections it finds. Microsoft releases a new version of the tool each month.

  See this link for more details:

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000