After that recommended BIOS upgraded satellite a series does not start

During the recommended BIOS Flash upgrade of the system came in suspended state.
I waited 1 h before trying to restart the laptop, I had to do with force by removing the battery.
Now the system does not even show the bios screen. Is there a way to fix this problem?

Hi Tom

Obviously something went wrong with the BIOS update and now BIOS is damaged.
I'm afraid there is nothing you can do except to authorized more close contact and ask for help.

I'm sorry. :(

Tags: Toshiba

Similar Questions

  • After 1 GB memory upgrade Qosmio G10 - 133 does not start

    Try to pass 512 MB with memory Kingston KTT3311 / 1 G 1512 MB

    I put the new Kingston 1 GB in the top slot of spare. When I rebooted the machine, the fan has come and the indicator light on the front came. But it seemed no not no start-up process at all and the screen remains blank. After a while the fan is stopped and the machine went into 'stop' mode I tried once more with the same result.

    I then pulled out the new 1 GB Kingston memory, leaving the memory of old as he was, and the reboot of the machine as usual with no message or error. I thought that the machine would automatically pick up the memory of mew and reconfigure itself.

    Any ideas on what could be wrong.

    Yes, the laptop and the BIOS should automatically pickup the new module of memory installed. Try to enter the BIOS and check if the module has been recognized and safe the BIOS settings.

    But perhaps you are using a bad?

    I think you should try the recommended Toshiba the memory module. In this case, you can be sure that it will work, and you are on the safe side to 100%.

    I found these PC2700 DDR - RAM compatible modules;
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

  • How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

    How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

    Install W7 sp1.

    Then go to the support page of Dell for your computer and download the audio drivers W7 from there and install them.

    See you soon,.
    Jerry

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • Satellite C650 - Windows does not start correctly

    I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

    Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

    Hey Buddy,

    You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

    If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite 1800-400 does not start, or crashes after upgrading RAM

    I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

    When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

    I removed the new RAM and it works well again.

    What can be the problem:

    (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

    (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

    (3) is there any other problem that I don't have?

    TKS

    Hi Ricardo

    I agree with feliks.
    The module is not compatible and not taken in charge can be responsible for your problem.
    The best way is to use the Toshiba recommended of the memory modules.

  • Satellite A200 PSAEOE does not start after upgrading memory

    Hi, I am first time here.

    I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

    Can anyone help me, please.

    Post edited by: Marian ovidiu

    Hello

    The A200 series supports different chipsets;
    Intel 945 PM
    Intel 945GM
    Intel 943GML

    As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
    Take a look at your laptop s user manual * Page 18.*

    Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

  • Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB

    I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not.

    When I put in the 1 4 GB module and 1 2 GB module the system starts without a problem and has 6 GB. I checked the two 4 GB modules, they work in any combination, but not when both are installed together.

    I couldn't find any rider or the settings of the bios for the RAM...

    Any idea?

    Thanks in advance for the help

    The last plausible explanation is that both modules are ok, but not compatible with each other.
    The laptop can be upgraded up to 8 GB of RAM. This should not be a problem since the unit is supported by the Chipset Mobile Intel HM55 Express.

    So I think that you need to replace the modules Kingston modules are great and work without problem.

  • Satellite L100 113 does not start after upgrading memory

    Hello.

    Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(

    I read manual - this laptop supports 533 PC4200 memory modules.

    But SO-DIMM 533 MHz will be delivered in one month...

    The memory modules, we can install to Toshiba L100-113?

    Thank you.

    Hello

    I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.

    Please visit this memory 3rd party:

    [Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]

    As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

    Concerning

  • Satellite A210-199 does not start successfully after the BIOS update

    Hello

    I've got Sat A210-199.
    Yesterday I updated the BIOS, and after that problems occurred:

    While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
    I guess all this because the temperature of the CPU:

    When I do nothing it is 77 C. I don't think it's normal: (.)
    Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

    Why this temp is so high?
    There is no any process background or something.
    Is this normal?
    And what about this new BIOS?

    To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

    This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

    Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

    Good luck!

  • Satellite P200D-130 does not start after upgrading RAM

    Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
    I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
    Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

    I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
    I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

    What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

    Thanks in advance,

    Michael

    Hello!

    I think that both modules are not compatible to the laptop.
    Normally you can upgrade your laptop to 4 GB. Look in the user manual.

    The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

    Good bye

  • Satellite 1410-304 does not start after upgrading memory

    I tried to extend the memory of 512 MB to 1 GB by placing two memory modules in my laptop Satellite 1410-304.
    These blocks of memory are each 512 MB and type: DDR400 PC3200 SODIMM.

    Each memory separate block in one of the memory slots A or B works well, no problems.

    However, when the two blocks of memory are installed, the laptop does not start no more.
    I hear the soft beeps indicating that a problem has occurred. The system works under Windows XP.

    Someone who can tell me how to solve this problem. Thanks in advance for your help

    concerning

    Marten

    Memory sticks are made by the same company? If this isn't the case, it will not work.

  • Satellite A60-672 does not start after upgrading memory

    Hello

    I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.

    Peter

    Hello

    I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.

    In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

    Good bye

Maybe you are looking for