After that v1.90 updated by Satellite Pro A300-1EA BIOS won't boot to the top

Similar Questions

• Satellite Pro C850 - 14 d won't boot to the top

  My laptop won't turn. I had the toolbar Sweet Packs to come and I'm never round down to remove. Then last week, it was not plugged and ran out of battery. When I plugged it would not start. I'm completely at a loss.

  I pressed F8 and tried to turn it on in safe mode, restore, back to the last good configuration, repair, etc., and none of them work. It still just goes back to trying to start and default. It requires the Windows 7 boot disk, but we do not have.

  I'm not particularly computer literate and I am now panicking a bit. Has anyone advice please.

  Thanks in advance...

  Please be so kind and tell us first what model of laptop you have.

• Memory and disk, update on Satellite Pro A300-1EA?

  So, now, I got the laptop on my desk and a new HARD drive and 2 GB memory module arrived by mail a few ago... open the hatch for the memory at the bottom of the laptop and got a clue how to install the thing.

  Don't I have just the courage to press hard enough for his slot? He began sliding in many, but then at some point it stops just go in... I have not yet opened the hatch of the HARD drive again. Somebody has experiences on these tasks who might want to talk to me about... ?

  Thank you fellow ' puterists!

  You can use a HARD SATA 2.5 ". 7200 RPM should be also compatible...

  Looks like everything is clear now ;)

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Re: Satellite Pro A300-1EA - difficulties in upgrading the BIOS

  Hello

  I tried to update BIOS on my new Satellite Pro A300-1EA (PSAG9E-001001EN), requested by Tempro, since version 1.50 to 1.90. The system has completely frozen during the BIOS flash, after waiting for an hour, I decided to turn the power off and pray for the best. Thank God, everything works still, but the BIOS is always v1.50, not been updated. I now read so many posts on the forum about the update of the BIOS of marbled and am now very cautious about subject to any BIOS updates at all.

  My questions are: is there about this particular update and/or with the installation of InsydeFlash problems? The BIOS updates are usually all so difficult that they have better be avoided? What are alternative means for updating BIOS, hopefully less dangerous? Also, could there be potential damage to my laptop that is associated with this is BIOS flash a miscarriage I should know about?

  Thank you very much indeed!

  Monsteress

  You can feel happy, my friend! :)
  I m surprised that your ROM module is damaged or something. In most cases, this occurs if the computer hangs during the update.

  Let me give you some advice. You should only update the BIOS if it of needed or if you have questions-problems with the laptop. You can ignore the messages of TEMPRO if your system is working properly. For example I have never updated the BIOS if my phone goes perfect never touch a running system ;)

  If not, follow the advice posted by Akuma before update you the BIOS to close all running programs, disable the AntiVirus and firewall and connect the AC adapter.
  On my Satellite U400, I've updated the BIOS without problems.

• Re: Satellite Pro A300-1EA: can I use faster and bigger HARD drive?

  So this may seem like a stupid question, but if I intend to spend of the installed 160 GB 5400 RPM HDD of the Satellite Pro A300 1EA to a 7200 RPM drive HARD (do not know the ability yet) and I was wondering how to make recovery disks (downgrade from Vista professional and XP Professional) coming with the work of the laptop with the HARD disk that does not part of factory as drives for my understanding restore the system...

  The size of the drive HARD replacement has something to do with the thing?
  If the replacement HARD drive is also 160 GB system see the difference? And even if it was smaller or larger the system see the difference?

  I have not even bought the laptop but will soon and it is a little urgent.

  Computer thanks Fellows ahead! :)

  * Oh... It seems that this question has already been answered... a little research has ever killed forum person huh... but if someone has vital information about the issue... Please let me know! :)*

  Post edited by: Carpathia

  Hello

  I think that he should t be a problem with an upgrade to a faster and bigger HARD drive.
  But before you switch the HARD disk, you must create the Toshiba Recovery DVD using the Toshiba Recovery Disk Creator.
  After the recovery disk has been created, you can move the hard drives.

  Best regards

• The upgrade memory and HDD on Satellite Pro A300-1EA

  So, I'm new to this forum so first of all Hello to all!

  I plan to buy the Satellite Pro A300 1EA and I came to the conclusion that I need to buy more memory that the thing has already installed (2 048 MB).
  I tried to search for information through Kingston and OCZ, but have not found something solid on what memory modules are supported by the A300-1EA.

  The A300-1EA uses DDR2 800 Mhz type of memory (max 8192MB) instead of just dealing with one module 2084 installed, I had intended to get two of them.

  What I have to buy two identical modules, or can I increase memory by simply adding a module to match installed?
  So if anyone has an idea where I could find on the modules of memory supported, that would be swell! :)

  The other thing is quite the same, but only with hard disks. I found many potential readers than fullfill my needs for a faster drive (upgrade of 5400 RPM / min-> 7200 RPM), but I don't know which ones work with this laptop.

  After all, I'm in the impression that laptops are not so easy on these pieces as desktop computers.

  Thanks in advance!

  Satellite Pro A300-1EA belongs to the series of PSAG9E, and it seems that it was fitted on the Chipset Mobile Intel GM45 Express.
  As far as I know, that you can improve this laptop 4 GB RAM max so I wonder which tells you something about 8 GB support.
  You can upgrade the memory to 4 GB, and you can use the 200-PIN SODIMM 800 MHz modules.

  But to be honest I don t understand why you want to upgrade if the 32-bit Windows operating system will see only 3.2 GB due to the limitation of the 32-bit operating system.

  With regard to the drive HARD;
  You need a HARD drive 2.5 SATA.

  Concerning

• My Satellite C660-155 won't boot to the top

  My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

  It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
  Any advice would be greatly appreciated.

  For better understanding, you must offer more specific information.
  You can enter boot options using F8 at startup?
  Figure option fix my computer in the list?
  You can boot OS in safe mode?

  Did you create the recovery disk?

• Satellite C50 won't boot to the top

  Hello

  My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

  Thanks in advance.

  You write about Windows or BIOS password?

  In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
  Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

  What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

  Is the cooling fan may be strong at the start of the machine?

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• Satellite Pro A300 / PSAJ1E - 01000XEN won't turn on

  I have a new laptop, Toshiba Satellite Pro A300 / PSAJ1E - 01000XEN.

  After I opened the box and put it on my desk, I connect to the AC adapter and after that I tried to turn on the laptop but there is no response.

  I removed the battery and pressed the button (to remove the static). I then plugged in the power adapter and properly turned on the laptop (with no battery).
  If I stop the machine, the laptop won't turn on with the battery and the AC adapter. I have to remove the battery so that the laptop turn on.

  I think the problem is the battery or maybe the BIOS... I await your comments on this topic...

  Concerning

  Hello

  What seems to be something wrong with your laptop.
  But please don t ask me what exactly wrong s or what part malfunctions.
  Without any control it s simply not possible to provide the final diagnosis.

  As you say, the machine is new.
  Why you n t contact your dealer and ask for replacement?
  Maybe you could get a new one?

  However, you can contact the ASP in your country for a detailed notebook check.

  PS; Your warranty is valid if you have no fees

• Satellite Pro A300-1PW - BIOS flash not successfully

  Hello

  I've updated the BIOS most recent on the Web from Toshiba site and my laptop froze now give a bad BIOS flash.
  All I get now is a white screen and the hard drive light flashes is anyway out of a bad flash

  I have a Toshiba Satellite Pro A300-1PW system
  Model number psag9e

  Thank you
  ADE

  I'm afraid there is not much you can do about it. The BIOS chip is ruined.
  Contact the nearest Toshiba service as soon as possible. They can help you with this.

• Satellite Pro A300-28R - how to enable virtualization in the BIOS?

  I tried to enable the setting of virtualization in the BIOS and the setting is disabled and I was unable to change the setting to activate. I have flashed the BIOS to the new version, and now how to enable virtualization has completely disappeared.
  The laptop model is Satellite Pro A300-28R with Windows 7 Professional and BIOS version 2.10.

  How do I enable virtualization setting so I can run Windows Virtual PC mode to run compatible programs XP?

  Hello

  Did you check the specifications of your laptop first?

  The fact is that the processor must support this virtualization and according to the Web of Toshiba site, your laptop is equipped with processor Core 2 Duo T5870.
  I checked this on the page of Intel CPU and virtualization isn't supported. That means t, you can use this feature!

  Here you can see this:
  http://Ark.Intel.com/product.aspx?ID=37034

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite Pro A300 - 1 GR - R08985EF.tag file in the partition of E:\

  Hello!

  I have Tosshiba Satellite Pro A300 - GR 1 and recently noticed a file named R08985EF.tag in E:\.
  The content of the file is "R08985EF" and he dated 12.7.2008 - the same date as the HDD Recovery folder and all its contents and has very similar modified-time.

  The file is not read-only and has no protection.
  What is it and can I remove it without negative consequences?

  Any suggestion will be highly appreciated!

  I do not recommend to delete this file because this file could belong to the HDD recovery procedure and if you remove then you'd be unable to UN the HDD recovery procedure