After that Vista update of my Satellite L40 won't start

After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.

I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?

Please help me!

For me, there is only one option: disable the automatic update to Vista.

By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?

Tags: Toshiba

Similar Questions

  • Update BIOS crashed Satellite L40 - 17Q

    I just did a bios update on my Satellite L40 - 17Q and after a reboot of the entire system just crashed... now I can't do anything, not even the bios does not start... I have a product recovery cd and the computer reads it but nothing more... someone can help me?

    In your case only the ASP will be able to help you!
    A few reasons your BIOS update failed and the module ROM was not flashed properly

    Ask your ASP for help.

    Good luck

  • Windows 7 Edition Home Premium. After that windows update will in a reboot loop

    Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

    Hi pbmass,

    I want to clarify if you are able to start the computer on the desktop after the system restore.

    Follow the steps mentioned below and then try to install the updates manually

    Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Step 2: Run the fixit available in the link below to reset windows update components.

     

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

     

    Step 3: Disable the security software; Follow the steps mentioned in the link below

    Disable antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Important: Activate security software once everything is done.

    Step 4: Download the update manually and then install them

    The .NET Framework 4 Client Profile is available on Windows Update

    http://support.Microsoft.com/kb/982670

    Description of the update for Silverlight:

    http://support.Microsoft.com/kb/982926

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

    My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

    What can I do?

    Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  • After that Windows update restarted as requested, by getting only now white screen

    After that Windows update restarted as requested, by getting only now white screen.

    Unable to set up windows

    I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

  • Cannot connect LiveView after that I updated. :(

    I just installed SUS for reasons other than the update of LiveView. I saw that they had an update for the LiveView, so I tried the update. The update process went smooth and well. However, after that the update and I lit my LiveView, it can no longer connect on my Xperia Active. I've never updated the LiveView since it came with my belt and no I'm regretting that I did.

    Can someone help me?

    The upper left on the LiveView LED continues to flash red and green while the screen looks like this:

    I use the LiveView daily as my wrist watch and I'm pretty mad at myself for even thinking to update.

    OK so I would check.

    1.) on your bluetooth settings click on detectable peripheral make and start pairing again.

    (2.) your liveview and liveware applications are up to date? try to clear the application data. Settings > apps > manage apps > Search tap apps on clear data.

    3.) you already odd devices? try to clear the data of Bluetooth even above procedure.

    4.) try to re update your camera liveview.

  • After downloading Vista updates

    After downloading Vista updates and install them, I get the new updates icon in the taskbar. While they inspected the history update, I see where the update was installed. What should I do to get rid of him. It comes even when I restart my computer. I have administrative rights for this computer.

    Hello

    Updates are you referring?

    Try the steps and then check.

    Step 1:

    Run the fix of the article.

    Reset Windows update components.

    http://support.Microsoft.com/kb/971058

    Step 2:

    Follow the steps in the article.

    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    See also:

    Updates: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  • After that 16 updates have been installed (most important) now my computer is running slowly and stalls, takes to always load anything... What is going on?

    I had 16 updats that microsoft said was important... OK update all now my computer runs very slow and short freezes... was working fine until it updates?

    Hi Valerie Krueger,

    Welcome to the Microsoft community. Looks like that after that the updates have been installed, the computer is running slowly. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    Method 1.

    Difficulty of Windows system performance slow computer problems: http://support.microsoft.com/mats/slow_windows_performance/en-us

    Method 2.

    How to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx#fbid=ke2GRxcvRz-

    Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx#fbid=p871fE9bGeH

    Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

    Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    I hope this helps.

  • Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

    Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

    jilll

    What version of Premiere Elements you use, what computer operating system?

    What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

    Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

    What is your planned export?

    Please explain, give more details.

    I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

    RTA

  • Satellite L500D won't start

    Hello

    My Toshiba Satellite L500D won't start.

    When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

    I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

    I hope someone can point me in the right direction

    Buddy

    Hello

    Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
    It will be interesting to know what you did with your computer laptop last days.
    Have you installed some day or anything that may be responsible for the issue described?

    Update the BIOS maybe?

  • My Satellite will not start after installing Vista updates

    My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

    I didn't have any rescue CD or save a Vista CD with my computer

    Can someone help me. Do you have ideas how to run again.

    Thank you very much
    Christine

    Hello Christine

    Can you please tell us which laptop model you have?
    Did you start your laptop with F8?
    What happens when you click Repair option?

    Please give us more information.

  • Satellite L25 - after that Windows update is unable to use the Wi - Fi button

    I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

    What I have to do is disable the adapter, turn it on, then re-boot.
    If I turned off the computer, I di everything again.

    This will make the button work? Or is there a setting that is always on?

    Hello

    > after a windows update, cannot use wi - fi on the front button
    Do you mean the button that launches Internet Explorer?

    According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
    Is this right?

    I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

    Welcome them

  • Do not start satellite A300-1AK after Win Vista update

    Hello all, hope someone can help me

    I have a toshiba laptop with a view, I got the brilliant idea to make a update for a long time that no was not updated at the end I restarted the update as necessary nb. and then nothing!

    The practice turn on the toshiba nb outside screen and then the screen remains black, the hard drive does not read, I tried to put the recovery disk and start the disk but nothing to put the dvd, but no operating system, does not read anything...

    That's happened? Possible that an update is this damage? The problem and as I have already said that I can't act somehow...!

    -I can't access the computer Safe Mode
    -always black screen and does not load the hard disk
    -J' updated because I just reset the laptop with the recovery DVD, so the drive worked, once the update is complete, restart Windows that I came out of this black screen, I noticed that does not read the hard drive. ..

    Thanks for all the support and suggestions.
    Please send me more ' procedure to run

    Francesco

    Hmm, do you mean you don't see anything? Neither the Red Toshiba start screen?
    What to say it doesn't sound good.

    But try this short workaround:
    Disconnect the power adapter, remove the battery. Leave the laptop for a while disconnected from both parties I would wait a few hours
    Then bring the two parties together and try power upward

    Good luck

  • Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

    Here's the problem:

    I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
    I spent more then five days trying to archive this, but without success and I am disappointed, much.

    I put aside all types of teaching and I did a lot of things, but none of them helped me.
    So the problem is like this:
    I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
    I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
    Press any key to boot from CD...
    When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
    Checking your configuration...
    After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

    It's driving crazy me and I can't install XP.
    It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

    Can someone help, please, because I'm going crazy?

    If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

  • Problems of updating BIOS on Satellite L40 - 15G

    Good afternoon.

    I have Toshiba Satellite L40 - 15G and I want to put 4 GB of ram (2 x 2).
    It works with 3 GB but with 4 GB it just does not start - gives me a blue screen.

    I read on the internet and discovered that I have to update my BIOS (my version curent is 1.60).
    I have vista 32 bit. I also tried to do the update via the site of toshiba, but without success.
    I am running the .exe file, but when I restart the computer I have the same version.

    What should I do?

    In the hope of a response.
    Pedro

    Hello

    I think you are using an incorrect BIOS.
    Satellite L40 - 15 G seems to belong to the series of PSL48E

    Check again!

    Toshiba Europe page provides a BIOS 2, 00-VICTORY for Vista and WIN-5, 50 for Win XP

    Regarding the upgrade of memory:
    I don't know if your laptop would be m supports 4 GB of RAM. Is that there are different models of L40 and some models supports only 2 GB of RAM!

    Your L40 - 15 G seems to use the Mobile Intel GL960 Express Chipset...
    Check out the details on the Intel page which RAM max can be managed by the Intel GL960 Express Chipset.

Maybe you are looking for

  • Symbols of cloud in iCloud drive?

    What is the difference between one without the arrow and the one with the arrow? I can access the files without the arrow on the computer I downloaded from, but it does not appear on my phone, iPad or other computers. Files with the clouds and arrows

  • Best way to install?

    Asked me to look at an Airport Express which I have no experience on. It is connected to a router ADSL from Sky and they want to use the Airport Express to extend their wireless. I guess you make an ethernet to the router at the most convenient airpo

  • Hidden not displayed in the window 2008 R2

    In the window Server R2 I have 40 GB partition this partition usage is up to 25 GB now the point is while I select all the files hidden and consulted and indicated his total record size 17 GB. I unchecked all option hidden the folder option but I cou

  • Security Center fraud

    Windows XP - I had 'The Shield Deluxe 2010' running. Windows Windows server 2003 audited. This security center appears again and again who want me to buy their security.   It's not pop up now, but I can't in any application that can fix.I can't downl

  • Quick question PopupScreen VerticalFieldManager:

    I'm building a contextual menu screen custom that displays two text fields, an OK and CANCEL button.  I use the VerticalFieldManager as the Manager.  I used the styles Field.FIELD_RIGHT and Field.FIELD_LEFT for the OK and CANCEL buttons to the OK but