After the automatic update, its has stopped working

Similar Questions

• "automatic update service has stopped working" when you try to install the software

  I'm trying to install Canon Imagebrowser provided with my camera.  Close program ends the installation process but cannot complete.  I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem.  This has happened with the software Imagebrowser - other software on the CD installed fine.

  OK... I thought about it.  Go to the link below and follow the instructions to manually install Imagebrowser.  It worked for me!

  http://USA.Canon.com/Cusa/consumer/standard_display/utility_browser
  Good luck...

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner

• Once more my automatic update of Vista stopped working today.

  Once more my automatic update of Vista stopped working today; It looks updates constantly and never ends. Set to automatic update was working yesterday the download and installation of Windows Defender - KB915597 (1.229.1407.0 and 1.229.1054.0 definitions).  This issue happened on August 9, 2016 when Windows Defender - KB915597 (definition 1.225.3489.0) has successfully installed on 8 August.

  Volume Z replied to my request for help the Oct 1 instruct me to download and run KB3185911 by his specific instructions.  This clear up my problem.  I tried to run this file (. Windows6 0-KB3185991-x 86.msu) still today after initial Volume Z instructions and received the notice, it did not apply to my system.

  The issue was revived by the release yesterday of KB3191203.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53972

  Best regards, VZ

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• Adobe lightroom problem: tried to install this program, run it, and he said automatically adobe lightroom has stopped working

  I tried to install this program, run it and it indicates automatically adobe lightroom has stopped working and I have to close the program. I tried to uninstall and reinstall the program and the same error occurs.

  Thus, it seems that the graphics cards drivers must be updated.

  I suggest you to visit the site of graphics card manufacturer and update the drivers for the graphics card.

• Notifier updates AAM has stopped working

  Every morning, I get a notice "AAM updates notifier has stopped working." my OS (Windows 7 64-bit).  I can't find solutions to this problem or even no evidence that someone else has this problem.  This is very weird.  I remember trying to run updates on my CS6 at some point and that he cannot somehow, but I've been very busy and not really pay attention.  I guess I thought: "I'll do it later."  But now I have this every morning instead...  When I search AAM Notifier.exe updates I can't find it on my machine anywhere.  AdobeUpdater also does not seem to exist on my machine.  I certainly didn't uninstall it myself, but I'd get how an error "stop working" on something that does not exist to run in the first place?  In any case, I would like to be able to run again the updates on my CS6 and stop to get this message every morning...

  I posted this in the comments to the Forum because I can't find a relevant forum after that in.  Someone suggests that I have try one product forums even if this issue is really on the notifier updates MAA and not photoshop specifically.
  

  Have Avittone you tried to remove and reinstall the Creative Suite 6?  I'd be concerned only to reinstall Adobe Application Manager as there could be other damage to your installation.

  We invite you to attempt to reinstall Adobe Application Manager to see if it solves your problems.  You can download a new copy of Windows https://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.

  If you continue to experience difficulties however I recommend a standard uninstaller and reinstalling the software as your next step.

• I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

  When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

  I suggest to see if there are updates or new versions available for IncrediMail.

  If still no luck, I suggest to ask the support of IncrediMail

  I hope this helps.

  See you soon,.

  J

  

• patch of active update module has stopped working

  Keep is mocrosoft message this patch of active update module has stopped working. Microsoft said it can be fixed by searching online, but the message keeps returning.

  Hi Westsiddavy,

  A. you are able to install updates?

  B. you get an error with the message code?

  C. recent changes made on your computer?

  Try the following steps.

  Step 1: online antivirus scan

  Perform an online virus scan to check if your computer is infected.

  www.Safety.live.com

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2: safe mode

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 3: reset windows update components

  Try this step if you found the error during the installation of updates. Open the link and click the fix button.

  http://support.Microsoft.com/kb/971058

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Updates Windows has stopped working for months in a row

  For the fourth month in a row updates windows has stopped working. When I use windows update troubleshooting get error 0 x 80070005(2016-07-13-T-02_20_41P).

  Tried to use windows update reset. I get the message, could not reset windows update due to the failure to stop bits service.

  Laptop HP 365

  Windows 7 Home premium

  I hope not. Unlike the last days of patch, KB3161608 is not an inescapable problem in preinstalling. It is a real solution. :)