After the deployment of a Windows 7 image, pc does not start after Windows logo

Similar Questions

• After the new installation Mobo and CPU, HDD IDE does not start in XP.

  I have improved my Athlon XP a new motherboard with an Athlon XII after 5 years. XP does not start and gives the following error:

  0x0000007B (0xF789E528, 0xC0000034, 0x00000000)

  I guess that's due to the used on the boards of different drivers. I can't boot mode safe. How can I fix?

  Help, please. Thank you!

  Hello Riggs614

  After Exchange of this type of major equipment, you will have to make at least a "repair" of XP.

  A repair will not lose any data, other that the Service Pack (if not on CD), no matter what Windows updates and unsigned, drivers that will need to be re-installed later.

  Stay offline for repairs and not go online again without a firewall is activated. After the repair of XP, install the Service Pack (if necessary), firewall, then you must install to the all the critical updates then.

  How to fix XP.

  1. start the computer from your Windows XP CD.

  2. When you see the "Welcome" screen press [Enter] to start the configuration of Windows.

  Note: Do not choose "to repair a Windows XP installation using Recovery Console, press R", not wanting to load the Recovery Console.

  3. accept the license agreement and Windows will search for existing installations of Windows.

  4. Select the XP installation that you want to repair in the list, and then press [R] to start the repair. Setup copies the necessary files to the hard drive, and then restart.

  5. do not press a key to boot from CD when the message appears. Setup then continues as if she were doing a clean install, but your applications and settings are preserved.

  http://www.theeldergeek.com/repairing_windows_xp.htm

  Way to scroll to the bottom of page for

  Windows installation CD - repair current Installation

   

  http://michaelstevenstech.com/XPrepairinstall.htm

  .

• Problem with the HP Media Center M7670. UK - a - does not start after you install an update to Apple Quicktime

  I just installed the latest update to Apple Quicktime (once an update message appears on the screen). When asked if I wanted to re - start the PC now, I clicked on Yes.

  Now the computer does not start. The power led lights up, then the hard drive light blinks for a while, then nothing happens and the PC begins to beep. The beeps are repeated, with 2 short beeps and one long beep. What do the beeps mean?

  Then a CMOS clear would be the next logical step in troubleshooting.

  Here is a link to your motherboard page.

  Clearing CMOS information at the bottom of the document.

  It is usually the last step before giving up on a motherboard.

  The problem you are experiencing is hardware motherboard related firmware.

• I have the Free AdAware from Lavasoft and suddenly it does not start and I can't remove it or re-insatll it; all solutions?

  All of a sudden my free AdAware spyware program does not start. I can't delete AdAware from the control panel or reinstall from the Web of Lavasoft site... There are some missing component installer. WHAT HAS HAPPENED, HOW CAN I REMOVE IT?

  Hi BobRullo,

  If you have installed the AdAware software recently, try to do a system restore that will repair return the computer to the point while it was working fine. Then, try to install the software.

  How to restore Windows XP to a previous state

  You can also ask your question in the Lavasoft forum for assistance.

  
  Reference: http://www.lavasoft.com/mylavasoft/support/faqs

  Hope the helps of information.

  Please post back and we do know.

• HP PSC 1315 Officejet series: the officejet HP PSC 1315 software installation disc does not start

  I'm trying to install the software for a HP PSC 1315 all-in-one officejet on an XP pc. When I put the disc in the CD/DVD drive, that it will not start. When I click on SETUP. EXE it does not start. Tried the drive in another laptop (Win10) and office (Win10) and the drive would go. I put the diskettes for installation of two other programs in the XP and two ran. I downloaded the Setup file of the Support of HP and he wouldn't either. Anyone know what is happening here?

  Hi @jonessbl,

  That will be better answered by the @Dellpeople.

  Thank you.

• After the updates installed for xp edition family, computer does not start even in safe mode (or in any other mode)

  computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)

  HiRonKlip,

  If you have the Windows XP installation disk, you can perform a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XW4400 does not start. Occurred after the power to the system off for 2 weeks. Now, does not start. Help!

  As noted above in the subject... exploded with power for about 2 weeks supply.  On his return the

  system won't start.  It keeps going in a circle.

  Here's what happens;
  

  (1) it goes to the window HP

  2) immediately goes to a window stating "windows did not start properly. A recent hardware or software change might be the cause. "Then on and other causes.  Well, none of them took place.

  To the bottom of the window there's several options to try.  Safe mode, Safe Mode Networking, last known successful... and start normally.  All the options have been tried several times.  To 30 sec timer waiting for your choice.  NONE OF THE OPTIONS WORK.  Cannot start in any mode.  After all of the selections it shows;

  (3) a flash of the microsoft windows screen and then we go back to number 1.

  Info on the system;

  XW4400

  • Manufacturer part number: ET115AV-CTO
  • Manufacturer: HP
  • Product description: ET115AV-CTO HP xw4400 Workstation computer desk
  • Product type: desktop
  • Form factor: mountable Convertible minitower on rack
  • Operating system: Windows XP Professional 64-bit
  • Processor: Core 2 Duo processor E6700 (2.66 GHz)
  • Front side bus: 1066 MHz front Bus up to
  • Chipset: Intel¿975 X Express
  • Memory: DDR - 2 667 MHz ECC unbuffered
  • Installed memory: 2 GB
  • Maximum memory: up to 8 GB
  • Installed hard drive: 160 GB
  • Hard drives: up to 4 SATA hard drives 2 to maximum
  • Expansion bays: 3 external bays of 5.25 inch and 1 external 3.5 inch bay 2-Bay internal 3.5-inch
  • CD DVD: 16 X DVD + - RW DL
  • Speed variators: controller 4 channels SATA 3 GB s integrated with RAID 0, RAID 1, RAID 0 + 1 capacity
  • Graphics card: NVIDIA Quadro FX1400
  • Expansion slots: graphics PCI Express (x 16) 1 slot 1 PCI Express (x 16 mechanically x 4 electrically) slots 1 PCI Express (x 1) and 3 long legacy PCI
  • Audio: Integrated high definition Audio with Jack Retasking capability,
  • Networking - communication: integrated Broadcom 5755 Netxtreme Gigabit PCIe LAN
  • I/o ports and connectors: front: headphone, microphone, 2 USB 2.0 and 1 optional IEEE 1394 a rear: 5 USB 2.0 1 USB 2.0 (internal) 1 serial port standard 1 keyboard PS-2 port 2 in parallel and mouse audio Gigabit LAN RJ-45 1 built-in audio microphone
  • I have no recovery disks!

  Hello:

  I can't help with your problem, because in this case, my recommendation would be to reinstall the operating system.

  What I can do, is give you information to get a set of recovery discs for your xw4400 for only $10 USD.

  Here's how:

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a Compaq HP xw4400, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (xw4400).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Paul

• Iso image VDR does not start

  Hello

  VSphere 4.1.0

  I'm currently building a VDR from scratch, I had some problems with a previous installation.  I can't get the VMwareDataRecovery - 1.2.1.1616 - 369570-i386

  . ISO to boot at all.

  I checked that another ISO image would be start, no problem.  But the VDR just... does not work.  I get kicked in the network boot agent / PXE after that.  I tried to start the ISO from a store of data with the customer's computer via the option "connect the CD/DVD.

  I just downloaded a new copy of the VDR to make sure I didn't have a corrupt ISO.

  Any thoughts?

  Thank you.

  The ISO installation file is not bootable. It contains for example the OVF files for the device...

  Extract the files from the ISO image or mount it to the virtual CD-ROM drive of a Windows VM to access the files.

  André

• Why is the reduction of noise on my image exporting does not correctly?

  Use Lightroom 4.4:

  When in the develop module, the image looks nice and not grainy at all almost heavenly and wispy.  Then, when I export it as a JPG file without sharpening or re-sizing, it seems awfully grainy as an exported file.  Help, please!

  Could you please create a new Test catalog, import images in there and then try to export the images from the most recent catalog.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• Apache does not start after the installation of ColdFusion11

  I am doing an upgrade to CF8 to CF11, but should keep CF8 on the server until CF11 runs correctly on my production server.

  Apache 2.2.26, Tomcat 7.0.64

  Windows Server 2008_R2 (virtual)

  I have the original CF 11.0.0 file directly from Adobe. I chose a standard installation (no JEE) with Apache web server and all subcomponents, no servlets. The installation proceeds without problems.

  In httpd.conf of Apache, I see the code section that had been added by my previous installation of CF8:

  LoadModule jrun_module "C:/ColdFusion8/runtime/lib/wsconfig/1/mod_jrun22.so".
  < IfModule mod_jrun22.c >
  .. .more code...
  < / IfModule >

  I also see the line of code that the installer was added for CF11:

  Include "C:\Apache2\conf\mod_jk.conf".

  I can also find the file mod_jk.conf in the place that it references and all CF11 files and folders that it references exist.

  I put in the comment section above for CF8 and try to restart Apache, but it will not start. There are no entries in the Apache logs to explain what happened. If I remove the comments for CF8 and comment out this line for CF11, Apache starts fine.

  Since the installation, I have three questions:

  1. Apache does not start successfully with mod_jk.conf CF11
  2. I noticed that the ODBC services do not run in Windows for CF11 (they are for CF8)
  3. I can not navigate to the admin of CF11. CF8 admin works fine (probably on the same port, huh?)

  Ideas about why Apache does not start correctly? Thank you.

  I finally found a useful entry in the Windows system event log:

  The named Apache service reported the following error:
  > httpd.exe: 526 C:/Apache2/conf/httpd.conf online syntax error: syntax on line 2 of C:/Apache2/conf/mod_jk.conf error: cannot load C:/ColdFusion11/config/wsconfig/1/mod_jk.so into server: Apache the named service is not a valid Win32 application.

  Looking at my previous installation for CF8 notes, I found a similar problem.

  Solution:

  Extract mod_jk22.so Apache 64 - bit C:\ColdFusion11\runtime\lib\wsconfig.jar (zip) to C:\ColdFusion11\config\wsconfig\1 like mod_jk.so (in lieu of essentially the mod_jk.so CF11 Installer put in place)

  Now, commenting on the CF8 to my Apache httpd.conf section and allowing the line CF11 allowed Apache to start properly. The file mod_jk.conf applies an alias to the CFIDE CF11 so that my web address can reach the CF11 Admin!

  Completion of the process of configuration/installation in CF11 then allowed me to download and install the update 7. On Self restart, ODBC connectors are also running!

  Situation with my questions:

  1. Solved
  2. Solved
  3. Solved

• Windows xp does not start in safe mode how to

  Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

  When you choose to start safe mode, which is the last thing you see on the screen?

  When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

  You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• 6 Lightroom does not start after installation

  Hello

  After that installation LR6 on imac 2013 10.9.5 os does not start correct LR. When you start LR you can see the image of start of LR for a very short time. That the image of the disspear and nothing more happens. LR does not start. Is anyone who has the same problem? Solution?

  Sincerely, hoping to help

  Bodo

  Try to connect on the desktop by these instructions application: connect, disconnect | Creative desktop application Cloud