After the hard stop, when I turned it back he said: preparing your desktop?

Similar Questions

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• I get the following error when I turn on my computer ' C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat.

  Original title: rundll error

  I get the following error when I turn on my computer.  I am running VISTA with service pack 2.

  C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat
  Thanks for the help.

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?

  Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?

  Not all applications are supported both orientations. If you experience of this with an app that should work, you know, you most likely locked up the switch of direction. Drag your finger from the bottom of the screen bezel to display Control Center. Tap on the lock with a circular arrow icon.

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1).

  Using the effect of text "cursor", I am able to view replace "30 ° C" "35.5 ° C". My question is: is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1). I use this code:

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = Math.round(temp*10)/10;

  [sliderValue + ' ° C ' "']

  Here is the solution:

  numDecimals = 1;

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = (Math.round(temp*10)/10).toFixed(numDecimals);

  sliderValue + "° C";

• How can I reinstall Photoshop CS5 after the hard drive on my iMac replaced?

  How to reinstall or download Photoshop CS5 after the hard drive on my iMac replaced?

  Hi hawkejo1,

  Please install Photoshop CS 5 from the following link: Download CS5 products

  And it to authenticate with the serial number.

  Kind regards

  Tanuj

• cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate also not going anywhere - it's a pc - thank you!

  cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!

  message says 'unavailable activation server this time... error code 24:24.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

  After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

  You actually have a renewal LR5 problem or ask yourself what you need to do?

  Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

  Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.

• delay after typing my password with the message: "preparing your desktop" displayed on the login screen

  I use Windows Vista for about 3 years now, it has been hurt on the first day.  However, it is the biggest problem I've ever known.

  My PC is currently the entire installation, which means that all the software, drivers and personal settings are applied to the way I would like it. But lately, I have had opportunities indicate that loggin, there was a long delay, after typing my password with the message: "preparing your desktop" displayed on the login screen (the PC was night shotdown, not having changed anything to the system), then I am connected to a desktop where I lost all my custom settings : wallpapers, plans, location of the updated table on the page icon, were all gone as if I start Windows for the first time, and every program I tried to run from there thought while they started upward for the first time.

  My office, I know, has completely disappeared.   How can I get it back?  Where at - it go?

  I am a school teacher and my student missions, etc. are in the files on the desktop.

  I'd appreciate any help you can give me.

  Please keep in mind that I'm not a techno person and very little familiar with several computer attributes.

  Thank you

  Press Alt + Ctrl + delete

  Start the Task Manager

  Click new task below or click file > new task

  Type explorer.exe

  Click ok

  Bring this back?

• Open windows with the "preparing your desktop" and all the specific parameters of the lost user

  Original title: laptop charge no office

  Please bear with me, this is my first post and I'm not very computer literate. I have a laptop Packard Bell under Windows 7. Everything seemed fine until I turned it on the other day and after the login screen I noticed that the blue screen of windows had a message saying, preparing your desktop... it stayed for a few minutes and then he went to my office, but the screen was black and none of my usual icons were present. He has none of my usual icons in the taskbar either. My usual browser of choice is Chrome, but now there is only IE in the taskbar. I did a scan with Malwarebytes and it came with JS/Redir, I removed this and restarted the computer laptop, but had the same problem. I can't access the internet, but a strange thing is that the default fonts for things like email have been changed. Please help me get my usual workstation and familiar environment of return!

  Hello Maurice Mann

  Thank you for all the time and effort that you put in trying to help me with my laptop PC problem.  I think that all the trouble which resulted from a faulty AVG!

  I finally managed to uninstall this program, I started to make progress.

  I finally got back on the internet by following the tips as follows: -.

  Run the SFC system several times. Click Start, click all programs, and then accessories. Right-click Guest, and then click Run as administrator. Type or copy sfc/scannow then press ENTER. If it finds errors, but cannot fix try a couple of times again. If it still does not work, then restart.

  I tried a few times and nothing happened, so I decided to make one last try and after a reboot, everything was back to normal.  I had the help of Windows and pages of back Support, my office, and all of my favorite settings and I've been on the internet Wi - fi!

  Thank you once again and I hope my information helps in the future.

  King looks

  Sonja