After the installation of lightroom 5 uninstall my older versions of lightroom?

After the installation of lightroom 5 uninstall my older versions of lightroom?

You can either you can leave. It is up to you.

Tags: Photoshop Lightroom

Similar Questions

  • After the installation of foxzilla and then uninstall my lap top is in mode without failure-cannot get the screen to normal size

    my screen is running in any tense safe mode - how can I return to a normal size occurred after the installation of foxzilla and even after I uninstalled it, it is still in safe mode-i tried to go to restore but it did not help.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    Kindly forward your question in Forum Vista programs at the above address.

    See you soon. Mick Murphy - Microsoft partner

  • After the installation of 6 of Lightroom, it fails to start due to the fault of libcef.dll

    Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll.  Three event log entries are created, as indicated under my signature.  Can someone help me please?

    Thank you

    Jeff

    Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c

    The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68

    Exception code: 0xc000001d

    Offset: 0x00000000020f5fa3

    ID of the process failed: 0 x 1280

    Start time of application vulnerabilities: 0x01d0cb85de3cf6e8

    The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe

    Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll

    Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

    --------------------

    Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.

    Program: Adobe Photoshop Lightroom

    File:

    The error value is listed in the additional data section.

    User action

    1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

    2. If the file is still not accessible and

    -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

    -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

    3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

    4. If the problem persists, restore the file from a backup copy.

    5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

    Additional data

    Error value: 00000000

    Disc type: 0

    --------------

    Fault of type 166477209, bucket 20

    Event name: APPCRASH

    Answer: No available

    Cabin ID: 0

    Signature of the problem:

    P1: lightroom.exe

    P2: 6.0.0.10

    P3: 5523190c

    P4: libcef.dll

    P5: 3.1750.1805.0

    P6: 53eb9d68

    P7: c000001d

    P8: 00000000020f5fa3

    P9:

    P10:

    Attached files:

    C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML

    These files are available here:

    C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46

    Symbol of the analysis:

    Recheck for solution: 0

    Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

    State: 0

    Hi Jeffrey,.

    Please refer: " Lightroom 6 crashes when I try and open it."  Signing off CC does not help :-(

    I hope this helps.

    Concerning

    Megha Rawat

  • Patches of Toshiba Service Station closes after starting after the installation of 3

    Hello

    We recently have a "patch day" Toshiba Service station. I think from my memory that the patches are released earlier, but I installed them on April 23, 2010. There are three patches, and so that I can restore from the system recovery, it was:

    -Flashing of BIOS
    -Patch HDD/SSD Alert
    -HDD Recovery patch.

    So, not to mention that I had problems to make the flashing patch BIOS to run, finally extracting installation files to another location and run it with administrator rights.

    My problem is that after this session of patch, my Toshiba Service Station no longer starts. When I start my system, after recording on it seems to start upward but always farm then again with windows say error report 'stopped working' and that's it. I'm not sure patch who this could be. I also believe that one of these Islands said in the description that it will update station itself? I downloaded Service Station on the Toshiba site but it will not prove at best, does not matter if I uninstall it, before you start the installation with administrator rights or not.

    My system is Satellite A500, Windows 7 64 bit.

    I hope you can help. Unless I can't access the updates anymore!

    Note: A few days before I installed a graphic driver for my Nvidia GT 230 m SINCE THE SITE WEB of NVIDIA. Why am I? I've lived literally all HOURS a unwanted system reboot and I see in the problem report it was always because of the graphic driver. Subsequently, I installed the two patches from the site of Toshiba, the elders and the most recent, but the problem persisted. Fortunately, a few days I have recheched the Nvidia site and there was a new driver.

    Although he said BEFORE (not now anymore) that this graphics card should be based on a driver manufacturer, I installed it but because he Coulnd't ' t get worse. The positive thing is that I didn't have a single far system crash even if I leave the phone turned on for hours.

    I'm not sure if the problem with the gas station started right after the installation of the graphics driver, but it can't be because I installed the three patches mentioned above, through gas station, a few days later.

    But he seemed to have affected the software after these patches? I'm not sure.

    Hello

    Simply said; Toshiba Service Station breaks down and new installation of this tool didn't help.
    Right?

    Well, because you are not sure what s wrong and depending on the assignment, you have other problems with the software, I recommend to recover the laptop using the recovery of HARD drive option!
    This will outline the laptop to factory settings.

    Of course, you must back up the data if you have important files.

    Run recovery disc HARD and after that check how the laptop would serve!

  • HP Director launch even after the installation of the updated software. HP Officejet 5510.

    Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

    Any ideas?

    [Personal information]

    Hello drudgedread

    Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

    First step: clear temp directory
    Type %temp% term or search programs and files of field
    Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    Proceed to step 2 below
    Second step: downloaded and extracted to your system:
    1 download the drivers and full software features
    Complete features Officejet 5510 software
    2. once the download is complete, double-click the file to extract the software.
    3. when the installation window opens, press the Cancel button to stop the installation
    4. tap folder in the race or search programs and files of field
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. right click on the folder and select copy
    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
    8 open the 7z, that you just copied on your desktop
    9 open the Util folder
    10 open the CCC folder
    11 start the uninstall_L4
    12. once the uninstall is complete, restart the computer
    13. run disk cleanup from the tools Accessories\ system under all programs folder
    14. download and install the latest version of Adobe flash player
    Adobe Flash Player
    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

  • XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

    Original title: xp does not start after the installation of avira

    I have a HP Slimline s7410
    XP Home Edition SP3
    I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
    I have a cd/dvd drive of work.
    I don't have an XP bootable installation CD

    My system worked well until: I installed the free version of Avira

    Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
    I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

    Here's what my BSOD looks like:

    Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:
    STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

    Any help is greatly appreciated! :)

    My first suggestion is to do a system restore at this time point.

    second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

    third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

    Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

    so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

    fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

  • After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

    Original title: screen saver does not start because MSVCR100.dll was not found

    After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

    ScreenSaver: Photo screensaver.scr - unable to locate component.

    This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

    The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

    Help, please. Thank you.

    Hello

    It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

    But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

  • Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

    Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

    Thank you!

    Hello

    Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ========

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Error 1068 when you try to start the WIA service after the installation of the W7 SP1

    Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

    SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

    Hello

    Method 1: Try to uninstall and reinstall Epson drivers and related software.

    Visit our articles to do the same below:
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
    http://Windows.Microsoft.com/en-us/Windows7/install-a-program

    Method 2: Also scan SFC (System File Checker) on the computer.
     http://support.Microsoft.com/kb/929833

    Hope this information helps.

  • After the installation of the OC windows 7 audio driver cannot be installed

    My computer is Toshiba satellite A40-s270 is designed for Windows XP after the installation of the co win 7 the sound is not coming on the icon of speakes I see X in red. What can I do to get the sound

    [Moved from comments]

    Hi Dr.Kamuzora,

    There is no Windows 7 drivers for your model. You can see the following link for more details:

    http://support.Toshiba.com/support/modelHome?FREETEXT=556028

    Windows 7 drivers are not available, first of all, let's try to uninstall their current card drivers and restart the computer so that Windows will try to install the base for your sound card drivers.

    Refer to the procedure below:

    a. press Windows key + R, type devmgmt.msc, press on ENTRY.

    b. in Manager devices, go to the audio, video controller and game, expand it.

    c. right-click on its index map, click on uninstall and click Ok.

    d. restart the computer.

    If the sound does not work, we will try to install the XP drivers (from the link above) in compatibility mode.

    Refer to this link: make sure to run older programs in this version of Windows
    http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

    If the problem persists, I suggest you contact Toshiba support:

    http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

    Hope the above information is helpful.

  • LIP does not work after the installation of a local language, writing in my windows software 8

    LIP does not work after the installation of a local language, writing in my windows software 8

    This icon is hidden... and there is no preview in the installed LIP.
    I hv uninstall the software, but for the LIPS does not work

    Hello

    You use the Microsoft Account or Local user account?

    Create a new user account and check the status of the question in the new user account.

    Create a user account

    http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

    You can also refer to:

    User accounts: frequently asked questions.

    http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

    Thank you.

  • HP 8600 prints only once after the installation of new

    I installed the new drivers on HP 8600 printer all-in-one. After the installation of the printer print very well. A few hours later not printing and print I uninstall and install again.

    Any ideas? TIA.

    chubuk7

    Hi chubuk7,

    When the printer stops printing, instead of uninstalling/reinstalling, I recommend to run printing HP and doctor Scan. It's a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity. Click on the link below for more details:

    http://goo.GL/PXeko

  • I can't update the Cloud Desktop App error 1001 designer after the installation of 5%. What can I do?

    3 times I chatted with Adobe support. At least, I had a link to 8 steps to solve the problem.

    Steps to follow:

    1. Open the activity monitor and close Adobe all related applications
    2. Navigate to: / Library/Application support/Adobe
    3. In this directory, you will see a folder named OOBE - rename this folder in OOBEold
    4. Navigate to: MAC HD/Applications/Utilities directory
    5. There, you will see a folder named "Adobe Application Manager" - remove
    6. Download Adobe here cleaning tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
    7. Open the cleaning tool and choose to clean 'Creative cloud' only.
    8. Download and install Creative new Cloud - https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg

    I tried all 8 steps. Step 5 "delete Adobe Application Manager" also. I got after the installation of new CCDapp - error 43 and new error messages.
    Example: Acrobat messaged it is damaged, because it has not been found the IMSLib.

    My idea was to reinstall all Adobe files and files of my Time machine backup. I am now back to error 1001.  I can't update my Adobe CC OBA programs.

    Who has an idea how to get the update of CCDapp work again?

    It is not recommended to restore backup Adobe applications or time machine, as the files need to be installed and not copied. If you have already tried to uninstall the creative application of Cloud Desktop, running the vacuum, then reinstalling and failed, then I recommend that you contact support for assistance.

    Please contact our staff of support directly by following this link: contact Adobe customer service.

    For more information, please visit: FAQ: how to contact Adobe for support?

  • Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

    We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32.  Most are on 6 45 update.  We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.

    For the last two weeks, we had trouble with our driver prior to installation.  What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51.  The Java Control Panel works.  We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.

    We tried the following things, which none worked:

    • Empty the Internet Explorer browser cache and cookies.
    • Clear the local Java cache.
    • Restart the computer.
    • Reset Internet Explorer settings, including personal settings.

    Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer.  It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.

    What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?

    We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account.  First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass.  This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.

    javaclean.ps1:

    #Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

    write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

    [table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

    If ($javas.count - gt 0)

    {

    write-host "Java is already installed" - ForegroundColor yellow

    #Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

    [table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

    $processes += get-Process - name "iexplore" #-erroraction silentlycontinue

    $processes += get-Process - name "firefox" #-erroraction silentlycontinue

    $processes += get-Process - name 'chrome' #-erroraction silentlycontinue

    $processes += get-Process - name "jqs" #-erroraction silentlycontinue

    $processes += get-Process - Name "jusched" #-erroraction silentlycontinue

    $processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

    If ($processes. Count - gt 0)

    {

    foreach ($myprocess to $processes)

    {

    $myprocess.kill)

    }

    }

    #Loop through the Java products installed.

    {foreach ($java to $javas)

    write-host "Uninstall" $java.name - ForegroundColor yellow.

    $java. Uninstall()

    }

    }

    Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.

    install.vbs

    '* ********************************

    '*

    ' * Script: install JRE 7 routine

    '*

    ' * Date: 14/03/14

    ' * Author: [REDACTED]

    ' * Rev: 1.0

    ' * Notes:

    '*

    '* ********************************

    '--------------------------------

    ' / / / Common

    '--------------------------------

    Set objFSO = CreateObject ("Scripting.FileSystemObject")

    Set objWshShell = CreateObject ("WScript.Shell")

    «Get the system architecture»

    Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

    Dim objSys

    For each objSys in colSys

    If objSys.AddressWidth = 64 then bolIs64Bit = True

    Next

    'Get the operating system

    Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

    Dim objOS

    For each COS in colOS

    If left (objOS.caption, 20) = 'Microsoft Windows 8' then

    bolIsWin8 = True

    WScript.Echo "win8.

    End If

    If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

    bolIsWin81 = True

    WScript.Echo "win81."

    End If

    Next

    ' Set 32-bit directory program files

    If bolIs64Bit = True Then

    strPFILES = "Program Files (x 86)".

    strSYSDIR = "SysWOW64".

    Else strPFILES = "Program Files."

    strSYSDIR = "System32".

    End If

    ' Set repertoire_windows

    strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

    'Set the current directory ".

    strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

    ' Set computer name

    strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

    '--------------------------------

    ' / / / Main script

    '--------------------------------

    '--------------------------------

    ' / / / Installation using .msi & capture exit code

    '--------------------------------

    ' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

    ""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

    ' wscript.quit (intExitCode)

    ' * COMMANDS RUN HERE *.

    "Create the folder structure if it does not already exist

    strFullPath = 'c:\Windows\Sun\Java\Deployment' "

    "How many levels are there in the path?

    nLevel = 0

    strParentPath = strFullPath

    Do until strParentPath = «»

    strParentPath = objFSO.GetParentFolderName (strParentPath)

    nLevel = nLevel + 1

    Loop

    ILevel = 1 to nLevel

    "Path of directory to the iLevel level to understand

    strParentPath = strFullPath

    For j = 1 To nLevel - iLevel

    strParentPath = objFSO.GetParentFolderName (strParentPath)

    Next

    ' Is it exist directory? If not, create it.

    If objFSO.FolderExists (strParentPath) = False Then

    Set newFolder = objFSO.CreateFolder (strParentPath)

    End If

    Next

    "Kill process

    objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

    objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

    objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

    objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

    objWshShell.Run "taskkill /F /IM java.exe", 8, True

    objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

    objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

    "Copy deployment files

    objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

    objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

    "Disable UAC".

    ' If bolIsWin8 or bolIsWin81 = True Then

    "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

    "objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

    "objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

    "End If

    "Install application".

    intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

    "Enable UAC".

    ' If bolIsWin8 or bolIsWin81 = True Then

    "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

    "objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

    "objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

    "End If

    WScript.Quit (intExitCode)

    '--------------------------------

    ' / / / Installation via .exe on network

    '--------------------------------

    "objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

    "" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

    "Need to turn off the security warning opening the file first.

    Set objEnv = objWshShell.Environment ("PROCESS")

    objEnv ("SEE_MASK_NOZONECHECKS") = 1

    ' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

    ("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

    ' WScript.Quit (intExitCode)

    ' * COMMANDS RUN HERE *.

    "Then turn it back on.

    objEnv.Remove ("SEE_MASK_NOZONECHECKS")

    '--------------------------------

    ' / / / Features

    '--------------------------------

    Help on this issue would be much appreciated!

    It turns out that it is actually a problem with Kronos Workforce Central.  We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6.  After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

    We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

    Detective Conan!

  • After the installation of Wacom Intuos Pro on OSX 10.11.2 launch Photoshop CS6

    Hello-

    Before installing Tablet PS worked very well; the stand-alone or launched from Lightroom.  After the installation of the driver of the tablet of software (WacomTablet_6.3.15 - 3.dmg) PS will now hang on launching regardless of LR or autonomous.  Desinstallion software Wacom and even rebooted but the problem persists.  The PS is updated.  Impossible to get an exact version because of the inability to launch.

    Tablet works as expected.

    Any help is appreciated.

    Jim

    Screen Shot 2016-01-06 at 5.26.39 PM.png

    Hi Jim,.

    Could you please press the SHIFT key and then launch Photoshop and see if it starts or not.

    Kind regards

    Tanuj

Maybe you are looking for

  • No taskbar of Youtube (play, pause, volume control / sound, etc.)

    Get no bar of tasks of YouTube, or control bar (play pause, noise level, etc.). . just a black screen, no his and no bar to order at the bottom of the black screen. All comments and replies to the messages displayed, but no way to click or start the

  • Re: How to install the backup software?

    I have Toshiba Recovery DVD for Windows XP of origin. But after the installation in backup softare avialble in system tools.I tried to install it from adding a program into the Panel control or extarct from the DVD. Also, I tried to download it from

  • Journe air 1000 lost internet radios

    HelloStations radio lost without reason. What should I do to get back them?

  • Clear print queue

    I can't delete print jobs in the queue of the printer by highlighting the work and remove.  What's the next thing that I can try? CB

  • I forgot to save a Word doc

    Like Datura, I just closed a document and notes lost a number of meetings. Is it possible to recover the text that I forgot to save? He lives in all tmp files or anywhere at all? No hope for me on this?