After the installation of my Satellite L500 OS version is installed

Similar Questions

• Joined to a domain and an administrator remote after the installation of SP1, updated to 10 settings (clean install) then

  Wipe the hard disk, reformatted and did a clean install of OS7 home (fossoyées pro hoping group domain policies and etc. would not be a problem).  But they are still there. Reinstalled again.  I can't remove the files manually, give me permission. Loading guard who looks like a fake update file, but I can't delete that either.  I'm at my wits end.  I also have a problem with one of my Outlook email accounts, displaying a string of what looks like a key under my user name.  I have dealt with this for 2 months.  had my machine to two different local mechanics and nothing.  Even exchanged the motherboard and the drive.  How's it relate?  I do not even use the same key.  The only way he could do it is through my network connection. (Disabled Wifi too).

  I read something on the Panther Trojan and I do not have a file of Panther on my machine (which again, I can't delete).  I didn't even think that HOME version had this kind of remote administration and yet it moves it. Its load of 32-bit strange file and run it on a 64 bit system.  I don't know what to do from here.  I can't get a version of Windows installed which does not suck up all my processing power and crazy amounts of data transfer.  I pulled out an old HP Pav and am now loading XP on it.  At least I will be able to view and edit files it contains.  I don't think safe, even check my email on this machine. (I use my ipad for that).

  Here are the results of the queries from the command line, screenshots and event log shears.   Since I was the last reinstall at about 21:00 there are 294 Logon and created special logons.  Not to mention that I had an another windows machine and one android corrupt their hooking up to my Dungeon phone.  The worst is a 10 years ' worth of my design files holding external drive.  Sighhhhhhh...

  IM so sick of looking at this.  Im going to bed and hopefully not dreaming about it.  If someone can tell me how to stop this happening, I would SO appreciate it.  Support for Windows is a joke.

  I have run 3 different programs of Virus Scan on it, reformat the drive twice (wiped to zero once), and used three different install media (three different versions of Windows. 0 s 7 home, pro and pro OS7 OS10 (7 pro is what I was running when this began).)  Again, it is after that I paid two services of different repair to diagnose, pull the wireless network card, replace the motherboard and replace the disk.  After that I freaked out on them they began to throw the installation discs and Home keys. lol seriously, I might as well throw my money down a hole. (the key I've finally pulled the machine isn't that I've never owned?) I guess that's why I'm trying so hard to get pure installed, I already so much money in it.  I should probably just give up and load Linux.

  If I ever get my hands on this bloody trusted installer it is a dead man. Thanks in advance!

  Microsoft (R) Windows (R) operating system group policy result tool v2.0
  Copyright (C) Microsoft Corp., 1981-2001

  Created on 20/07/2016 at 23:03:12

  The RSOP data for OWNER-PC\Administrator on your PC-OWNER: Logging Mode
  ----------------------------------------------------------------

  OS configuration: Standalone Workstation
  OS version: 6.1.7601
  Site name: n/a
  Roaming profile: n/a
  Local profile: C:\Users\Administrator
  Connected over a slow link? : no

  COMPUTER SETTINGS
  ------------------

  The last time group policy was applied: 20/07/2016 to 22:31:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: 37L4247E29-32
  Domain type: Windows NT 4

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The computer belongs to the following security groups
  -------------------------------------------------------
  Required at the system level
  Everyone
  Builtin\Users
  NT AUTHORITY\SERVICE
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  BDESVC
  BITS
  CertPropSvc
  EapHost
  hkmsvc
  IKEEXT
  iphlpsvc
  LanmanServer
  MMCSS
  MSiSCSI
  RasAuto
  RasMan
  RemoteAccess
  Annex
  SCPolicySvc
  SENSE
  SessionEnv
  SharedAccess
  ShellHWDetection
  wercplsupport
  Winmgmt
  wuauserv
  LOCAL
  BUILTIN\Administrators

  USER SETTINGS
  --------------

  The last time group policy was applied: 20/07/2016 to 22:36:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: OWNER-PC
  Domain type:

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The user is part of the following security groups
  ---------------------------------------------------
  None
  Everyone
  BUILTIN\Administrators
  Builtin\Users
  NT NT\INTERACTIF
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  LOCAL
  NTLM authentication
  High mandatory level

  After you activate the hidden administrator account (which already had a defined password btw)

  C:\users\administrator>set
  ALLUSERSPROFILE = C:\programdata
  APPDATA = C:\Users\Administrator\AppData\Roaming
  CommonProgramFiles = c: files
  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
  CommonProgramW6432 = c: files
  COMPUTERNAME = OWNER-PC
  ComSpec=C:\Windows\system32\cmd.exe
  FP_NO_HOST_CHECK = NO
  HOMEDRIVE = C:
  HOMEPATH = \Users\Administrator
  LOCALAPPDATA = C:\Users\Administrator\AppData\Local
  LOGONSERVER = \\WIN-01J5F1J7NAH
  NUMBER_OF_PROCESSORS = 4
  OS = Windows_NT
  Path = c: Windows system32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32
  \WindowsPowerShell\v1.0\
  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
  PROCESSOR_ARCHITECTURE = AMD64
  PROCESSOR_IDENTIFIER = Intel64 family 6 model 23 Stepping 10, GenuineIntel
  PROCESSOR_LEVEL = 6
  PROCESSOR_REVISION = 170 a
  ProgramData = ProgramData
  ProgramFiles = c: Program Files
  ProgramFiles (x 86) = c: Program Files (x 86)
  ProgramW6432 = C:\Program Files
  PROMPT = $P$ G
  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
  PUBLIC = C:\Users\Public
  SESSION = Console
  SystemDrive = C:
  SystemRoot = C:\Windows
  TEMP = C:\Users\ADMINI~1\AppData\Local\Temp
  TMP = C:\Users\ADMINI~1\AppData\Local\Temp
  USERDOMAIN = OWNER-PC
  USERNAME = administrator
  USERPROFILE = C:\Users\Administrator
  windir = C:\Windows
  windows_tracing_flags = 3
  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• After the upgrade of RAM Satellite L500 does not turn

  I need help.
  After trying to upgrade ram, my laptop refuses to turn on.

  I assume you are using incompatible memory modules.
  Can you please post model mobile exact and the RAM you are using?

• Streets of MS & travel will not work after the installation. Message says reg. Error & re - install. Re-install does not correct.

  What happened the installed program 5 or 6 months ago after a vista update. even after uninstall the program and reg cleaning then reinstall error persists. Very strange for a coflict how MS product.

  Hello

  1. What is the exact full error message?
  2. Remember to make changes to the computer before the question?
  3. What version of Microsoft streets & trips do you use?

  I suggest you try the procedure described in the link below:

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590

  You can also check:

  MapPoint / streets & trips / Highway Solution Center

  http://support.Microsoft.com/ph/1058#TAB0

• Loss of FN - key after the installation of the updates from Microsoft on L500 security

  I am using a satellite L500-19U

  After the installation of Microsoft security updates the FN lost their function except the brightness keys + /-function.
  also the function keys that appear on the upper border of monitor by pressing the FN key appear after the security packages have been installed.
  I solved the problem by removing the update through the function of W7 (Wiederherstellungs punkt) back.

  The following security packages are selected to be installed:
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)
  Update security for Windows 7 for x 64-based systems (KB979683)
  Update security for Windows 7 for x 64-based systems (KB980232)
  Update security for Windows 7 for x 64-based systems (KB981332)
  Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool)

  Which of them are unsuspicios, which must be postponed, the updates are necessary after installation, updates?

  Post edited by: JoJo58

  Hello

  If you read about these update on the Microsoft website: (not of them should affect the FN keys)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=998164b7-4B8C-468B-8d39-f242633c8838

  I checked the history of updates on my computer and all of them are installed with the exception of Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool). Everything works correctly, try to remove this update.

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Patches of Toshiba Service Station closes after starting after the installation of 3

  Hello

  We recently have a "patch day" Toshiba Service station. I think from my memory that the patches are released earlier, but I installed them on April 23, 2010. There are three patches, and so that I can restore from the system recovery, it was:

  -Flashing of BIOS
  -Patch HDD/SSD Alert
  -HDD Recovery patch.

  So, not to mention that I had problems to make the flashing patch BIOS to run, finally extracting installation files to another location and run it with administrator rights.

  My problem is that after this session of patch, my Toshiba Service Station no longer starts. When I start my system, after recording on it seems to start upward but always farm then again with windows say error report 'stopped working' and that's it. I'm not sure patch who this could be. I also believe that one of these Islands said in the description that it will update station itself? I downloaded Service Station on the Toshiba site but it will not prove at best, does not matter if I uninstall it, before you start the installation with administrator rights or not.

  My system is Satellite A500, Windows 7 64 bit.

  I hope you can help. Unless I can't access the updates anymore!

  Note: A few days before I installed a graphic driver for my Nvidia GT 230 m SINCE THE SITE WEB of NVIDIA. Why am I? I've lived literally all HOURS a unwanted system reboot and I see in the problem report it was always because of the graphic driver. Subsequently, I installed the two patches from the site of Toshiba, the elders and the most recent, but the problem persisted. Fortunately, a few days I have recheched the Nvidia site and there was a new driver.

  Although he said BEFORE (not now anymore) that this graphics card should be based on a driver manufacturer, I installed it but because he Coulnd't ' t get worse. The positive thing is that I didn't have a single far system crash even if I leave the phone turned on for hours.

  I'm not sure if the problem with the gas station started right after the installation of the graphics driver, but it can't be because I installed the three patches mentioned above, through gas station, a few days later.

  But he seemed to have affected the software after these patches? I'm not sure.

  Hello

  Simply said; Toshiba Service Station breaks down and new installation of this tool didn't help.
  Right?

  Well, because you are not sure what s wrong and depending on the assignment, you have other problems with the software, I recommend to recover the laptop using the recovery of HARD drive option!
  This will outline the laptop to factory settings.

  Of course, you must back up the data if you have important files.

  Run recovery disc HARD and after that check how the laptop would serve!

• After the installation of the OC windows 7 audio driver cannot be installed

  My computer is Toshiba satellite A40-s270 is designed for Windows XP after the installation of the co win 7 the sound is not coming on the icon of speakes I see X in red. What can I do to get the sound

  [Moved from comments]

  Hi Dr.Kamuzora,

  There is no Windows 7 drivers for your model. You can see the following link for more details:

  http://support.Toshiba.com/support/modelHome?FREETEXT=556028

  Windows 7 drivers are not available, first of all, let's try to uninstall their current card drivers and restart the computer so that Windows will try to install the base for your sound card drivers.

  Refer to the procedure below:
  

  a. press Windows key + R, type devmgmt.msc, press on ENTRY.

  b. in Manager devices, go to the audio, video controller and game, expand it.

  c. right-click on its index map, click on uninstall and click Ok.

  d. restart the computer.

  If the sound does not work, we will try to install the XP drivers (from the link above) in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Toshiba support:

  http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

  Hope the above information is helpful.

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.

  

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?