After the installation of the OC windows 7 audio driver cannot be installed

Similar Questions

• Can not start, after the logo window shows the screen empties.

  I tried safe mode. When pilots take care it stops a...\system32\drivers\mup.sys crashes then.

  Original title: after the logo window shows the screen turns off. I deleted the drivers and now I don't know how to reinstall if I can't see the windows or office. __

  Hi Hermmm,

  • Who were the drivers that you have deleted from your computer?
  • You have the Windows XP installation disk?

  Step 1

  You can try to boot the computer to the last good known Configuration and check if it helps to start the desktop. To boot to the desktop in Dungeon known, pressing F8 during restart last good Configuration. Once you see the startup option in the last good known Configuration and press ENTER. Check if you can access the desktop.

  You can also try to disconnect all external devices except the keyboard, mouse and monitor and check if you can boot to the desktop.

  Step 2

  If the steps above do not help, you can boot to the recovery console and try to disable the service or the device to the computer and check if it helps you to solve the problem. The links below for more information on how to boot to the recovery console and disable the service and the device in the access recovery console.

  How to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  How to disable a Service or device that prevents Windows from starting
  http://support.Microsoft.com/kb/310602

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the last Windows Update (04/27/11), my home group no longer works

  Original title: homegroup after Windows Update failure

  After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

  I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

  The resolution of the problems of the residential group has done several things, but that did not help.

  What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

• can't see the Dvd rom after the Update window window 10 7

  can't see the DVD rom after the Update window 10 window 7.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

   

  Method 1: Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:

  a. type Troubleshooting in the search bar and click on it.
  b. click hardware and sound.
  c. click on Windows Media Player DVD and follow the instructions.

  Method 2: Uninstall, reinstall the drivers CD/DVD.

  a. press the Windows key + X , and then click Device Manager

  b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
  c. When you are prompted to confirm that you want to remove the device, click OK.
  d. restart the computer.
  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

  Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• 30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?

  30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?

  Try reinstalling AAM.

  https://www.Adobe.com/support/downloads/detail.jsp?ftpID=4773

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• Just bought the new pc with Windows 8.1 and cannot re - install InDesign CS3. Can anyone help?

  Just bought the new pc with Windows 8.1 and cannot re - install InDesign CS3. Can anyone help?

  Hi Dale,

  You can follow the article: system requirements | InDesign to check if the CS3 products can run on InDesign CS3.

  Also please let me know what error message you get while re installation of InDesign.

  Thank you

  Yann Arora

• Windows XP Home edition cannot be installed on the Satellite P200

  Hello

  Sorry, but my English is not good.
  I have a Satellite P200-17 b, model PSPB3E...
  The problem: it has VISTA installed, but I need WXP as operating system.
  Windows XP Home edition cannot be installed because it cannot find the hard drive.

  What can I do?
  It's Windows XP SP2 home edition Professional

  Can someone help me?

  Thank you
  Jürgen

  First
  Download your PC card mother SATA driver

  http://www.toshibatech.NET/f6flpy32.zip
  This file exract disket diskette
  then
  open by pushing pc F12
  Open with the XP CD
  floppy drive in pc

• When I try to delete an element of images/documents, etc, it is moved to the Recycle Bin ok but the little window recycling rest and cannot be canceled

  original title: Please help me.

  When I try to delete an element of images/documents, etc, it is moved to the Recycle Bin ok but the little window recycling rest and cannot be cancelled by the task handle. If I open 'my computer' and start typing in the search box it also freezes and it slows down my computer. I ran spybot, AVG, disk etc. defragmentation, but no problems were discovered.

  Have you tried running SFC. EXE/scannow from a high command prompt to repair a corrupt Windows?

• Re-installing Photoshop CS5 after the death of my hard drive.

  I'm reinstalling Photoshop CS5 after the death of my hard drive. The system is not accepting my product code. What's wrong?

  Thanks for your help. I found my information and I was able to enter the access code. Jeff

  Sent from my Verizon Wireless 4 G LTE smartphone

• What to do when the driver cannot be installed

  my hard drive will not read my CD. I tried everything I know. Installed the patch program, but it says driver cannot be installed. I need an answer on what to do about it.

  Lillian Day

  Hello

  Don't forget to start as admin.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to solve this problem: we encountered the following problems: creative cloud desktop cannot be installed. (Error code: 1).

  We encountered the following problems: creative cloud desktop cannot be installed. (Error code: 1).

  Code 1 https://forums.adobe.com/thread/1434528

• I download creative cloud but I can't open it, it gives me a massage ' we encountered the following problems: creative cloud desktop cannot be installed. " (Error code: 1) ".

  I download creative cloud but I can't open it, it gives me a massage ' we encountered the following problems: creative cloud desktop cannot be installed. " (Error code: 1) ".

  Hi Wojood,

  You can follow the article: error: "unable to install". Creative Cloud Desktop which will allow to get this issue fixed.

  Let us know if you face more problems with this.

  Thank you

  Yann Arora

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• After the last windows patchday closing all by showing the video (flash/media player /...)

  Hello

  After the last patchday (last week) I can't watch videos. If I watch a flash video or a video with Windows Media Player, after a short period (1 to 5 min) Windows shuts itself. When I start Windows again, it does not open a crash report.
  I reinstalled my video card drivers and - because I thought installation may be broken - Microsoft Visual C++ 2005 and 2008 (redistr.).

  But nothing helped.

  Sometimes I can watch Flash videos all night and then all of a sudden Windows stops.

  Temperature is ok, coolers all run.

  Try a few game demos, they run well.

  I hope someone can help.

  Thank you very much!

  Aljoscha

  My Hardware Specs:

  Betriebssystemname Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  Additional Betriebssystembeschreibung not available
  Microsoft Corporation Betriebssystemhersteller
  SystemName NSA-01
  Manufacturer of the Systemhersteller system
  Systemmodell system product name
  Systemtyp x 64-based PC
  Intel Core i5 - 2550 K CPU @ 3.40 GHz, 3401 MHz processor, 4 Kern (e), 4 (r) processor logische (en)
  Version of BIOS/date American Megatrends Inc. 4105, 01.07.2013
  Version SMBIOS 2.6
  Windows-Verzeichnis C:\Windows
  Systemverzeichnis C:\Windows\system32
  Startgerat \Device\HarddiskVolume1
  Gebietsschema Deutschland
  Hardwareabstraktionsebene Version = "6.1.7601.17514".
  Installierter physikalischer Speicher (RAM) 12.0 GB
  Model realer GB Speicher 12.0
  Rechtssicherheit realer GB Speicher 9.74
  Virtueller model GB Speicher 12.1
  Virtueller Rechtssicherheit GB Speicher 9.47
  Big der Auslagerungsdatei 100 MB
  Auslagerungsdatei C:\pagefile.sys

  ----

  Name ATI Radeon HD 4800 Series
  PNP-Geratekennung PCI\VEN_1002 & DEV_9440 & SUBSYS_02781043 & REV_00\4 & 80E7924 & 0 & 0008
  Card Adaptertyp (0 x 9440) ATI graphics, Advanced Micro Devices, Inc. - scripte
  Adapterbeschreibung ATI Radeon HD 4800 Series
  Adapter RAM 1.00 GB (1.073.741.824 bytes)
  Installierte Treiber aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  Treiberversion 8.970.100.7000
  INF-Datei oem32.inf (section ati2mtag_RV7X)
  Farbebenen not available
  Farbtabelleneintrage 4294967296
  Resolution 1440 x 900 x 59 Hz
  32 bits/Pixel
  0xE0000000-0xEFFFFFFF Speicheradresse
  Speicheradresse 0xF7E20000-0xF7E2FFFF
  A-E-Port 0x0000E000-0x0000EFFF
  IRQ channel IRQ 4294967294
  A-E-Port 0x000003B0-0x000003BB
  A-E-Port 0x000003C0-0x000003DF
  Speicheradresse 0xA0000-0xBFFFF
  Treiber c:\windows\system32\drivers\atikmpag.sys (8.14.1.6264, 351,50 KB (359,936 bytes), 16.11.2012 20:39)

  Hello

  Try following the s method provided below and see if it helps:

  Method 1:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135     

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Method 2:

  Also check the power options, if your computer is configured to stop when idle.

  a. power by clicking on the Start button, open the Options click on the Control Panel, clicking system and Maintenance, and then clicking Power Options.
  b. in the select a power plan page, click on change settings for the plan under the selected plan.
  c. on the parameters of change in the plan page, click on change advanced power settings.
  d. on the Advanced Settings tab, expand lid and buttons power, expand power for the start menu button and then do one of the following:

  If you use a laptop, click on battery or plugged in (or both), click the arrow and then click sleep, Hibernate, or Shut Down.

  If you are using a desktop computer, click setting, click the arrow and then click sleep, Hibernate, or Shut Down.
  e. click OK and then click on save changes.

  Here are the articles that should give you more information on this topic:

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Check if you find an error recorded in the event viewer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  WHat information appears in newspapers events (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope this helps, let us know the status of the issue.