After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

Similar Questions

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Whenever I try to download I get this error message "a socket operation was attempted to an unreachable network. "This means that the local software knows no route to reach the remote host.

  Hi all

  I use windows 7. whenever I try to download I get this error message "a socket operation was attempted to an unreachable network. "This means generally that the local software knows no route to reach the remote host" what does that mean?  help solve this problem. Thank you '.
   
  Original title: proxy error

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories

  Hope this information is useful.

• How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

  How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

  Updates are not related to series numbers, so you must have done something compared to try to use an upgrade rather than an update.  Adobe not revise older versions of their software to adapt to the latest hardware/devices.  They create/sell new versions of their software for it.  If you subscribe to the Cloud at some point you shouldn't have a problem with the software becomes obsolete.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed.

  I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.

  Thank you

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  Option (2)

  Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html

  He helped?

• "Could not complete your request because the file was not found."

  Hello!! I can't open any file .jpg in trial version Photoshop CC 2014. I get the error message "Could not complete your request because the file was not found."

  .png and .psd files work perfectly well. Any help would be greatly appreciated.  Thank you

  Error: 'File not found' when opening JPEG files Link to the installation program Adobe Camera Raw 9.4.

• Error: Could not complete your request because the file was not found. Help!

  I've updated Photoshop CC and now if I try to open any file (jpg, psd, etc.), I get an error message: could not complete your request because the file was not found. Files lived on a hard drive, then I moved into the office... still no go. PS I uninstalled and re-installed. Same mistake. Here are the best, I can open the files very well in my old Photoshop 5.1... Any ideas? Working on a Macbook OS X 10.7.5 (really hoping that I don't have not updated to El Capitan)

  Hi banderababe,

  Photoshop CC 2015 is not compatible on Mac OS 10.7.5, however if you only use the version of Photoshop CC, then you can try to reset the preferences of Photoshop back to default values.

  "To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  System requirements:configuration of Photoshop

  Let us know if that helps.

  Kind regards

  Mohit

• The/pls/apex/f requested URL was not found on this server. -out of blue

  Hello
  I started getting error '/ pls/apex/f URL was not found on this server.' requested while trying to 'run' on the page. I can edit it and, if iexport/import it it works fine, until after I start making changes to all switch elements of "item displayed as text basedo n lov, does not save state' to 'Save State '. It doesn't seem to be a specific item...
  Where can I see the log which is agitated hapenning during execution of this page?
  Thank you
  Andrew

  Andrew,

  RE: 1 - because now I just want to be able to see step by step what happens when rendering or submit occurred.

  Running in debug mode will show you that.

  RE: 2 - you said: "then the method I described (that you used) is the simplest way." I'm not sure I understand - what methodology?

  You said in the second post on this topic, "the approach I used to nail the region is the link: here", and you have access to a post where I described how I would do, still shows here:

  I would disable systematically on the side 'show' of the page. Start by regions. Put a condition never on each. Run the page. If the error Stops, you know that the problem was in one of the regions. If this is not the case, turn off the process and calculations, etc.. Then enable these components one by one until the problem recurs. When you conclude that the problem area (if it's a region), then disable the elements and buttons in the region and so on. The problem may be due to an unhandled exception somewhere inside one of the components.

  RE: 3 - all types. It is not clear (to me at least) if the binding occurs correctly, what values are passed to the pl/sql. I have referred to the session variable correctly or I made a typeoff, etc., etc.

  Again, more details on the situation would be useful. At page debug output is not sufficient, and equip your own code is not enough, you can always find your database session and see what happened. Add & ptrace = YES to the URL, run the page or send the page check the destination database for the trace file and tkprof dump to get a report.

  Scott

• "Could not apply the workspace because the file was not found."

  I've just upgraded to the latest version of Photoshop (CC 2015.5). Some of my photoshop files does not open and I get an error message: "could not apply the workspace because the file was not found."

  I have uninstalled/installed Photoshop CC 2015.5, I uninstalled and installed two previous versions of Photoshop, I reset my preferences, and I repaired disk permissions.

  None of them worked.

  What would it be?

  Hello

  Quick note giving clarification on the 2105.5.1 update: the error message that the OP has reported is inaccurate for the State. The update should simply fix the alert to note that it is impossible to open the file, instead of the misleading warning that a workspace cannot be applied.

  We did not all patches to open a file that fails intermittently. We have still not an understanding of root to the problem the OP has been run in.

  Kind regards

  Steve

• PS: Could not complete your request because the file was not found.

  Mac OS X 10.7.5.

  PS CC 2014 2.2.

  Since I've updated my CC of the PS today, I'm unable to open jpg in PS files, even the JPG files that I had no problem opening in PS so far. Whenever I try, I get the following error message:

  "Could not complete your request because the file was not found."

  (I'm able to open PSD files, however.)

  Help someone? Much appreciated!

  Which could result from the 9.5 camera raw update.

  Error: "file not found" when opening JPEG files

• Since the update, I can't open a JPEG file: "Could not complete your request because the file was not found."

  My subscription to creative cloud updated Photoshop the other day. My iMac is running 10.8.5. Ever since this update, I can't open a JPEG file and get a message indicating "could not complete your request because the file was not found." I'm sure it's related to the update, but how can I cancel it and get things to normal?  (do not include your email)

  Post edited by: Eugene Fornario title should be brief, but descriptive.  No personal information in post.

  Hello

  Please refer to this article error: 'File not found' when opening JPEG files and try the workaround provided.

  Let us know if that helps.

  Kind regards

  Assani