After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

Similar Questions

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• Error "your license may not be downloaded, put to upgrade to internet explorer 7 or higher, I have windows 9" when you try to read the torn pieces.

  Actual title: windows media player

  Hi guys ive update to windows 7 on xp, but having a problem of playing music with media player 12. IM tearing my drive and it works but when I try to play a song, it goes to the web and says your license may not be downloaded, put to upgrade to internet explorer 7 or higher, I have windows 9.

  So to make sure she wasint my disc I downloaded i tunes and they all copied without probs and play without a disc loaded.
  Can anyone help please id prefer to use media player

  Hi Grego,

  Thanks for posting your query in Microsoft Community.
   
  You are not able to play songs torn on Windows Media Player 12. I'll be happy to help you with this problem.
  
  Method 1: I suggest you follow the steps to run the troubleshooter from the link and if it helps.
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
   
  Method 2: If the problem persists, I suggest you delete the database of Windows Media Player. To do this, follow these steps:
  (a) output Windows Media Player.
  (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
  (c), select all the files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  (d) restart Windows Media Player.
  Note: Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  (a) output Windows Media Player.
  (b) click Start, click Run, type % LOCALAPPDATA%\Microsoft, and then click OK.
  (c) select the folder Media Player and then click on Delete on the file menu.
  (d) restart Windows Media Player.
  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Receive the error «your computer is not assigned a network address...» "often when I performed a Network Diagnostics

  I have problems to connect certain devices to my computer via my wi - fi. I'm usually able to resolve the problem by running Network Diagnostics, but after awhile, I start to have problems of connectivity network again.

  Whenever I run the diagnosis in these situations, this error in the observer of events (under DHCP-client)

  "Your computer not was not assigned a network address (by the DHCP server) for the network card with network 0x2225D3CC6415. address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP). »

  I currently have the DHCP Server enabled on my router.

  You must perform a full scan of viruses and malware for more security.

  As I said, you can try resetting winsock and tcp/ip which can remove the module from the network chain and I hope that allow access.

  Please see the post by SpiritX: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/programs-cannot-run-without-being-ran-as-admin/b585c119-07fb-47a8-b4a4-e8cccfc88df8

• my Media Player does not work (Vista) in a website after my last windows update.

  I have a virus scanner, checked my computer by running sfc/scannow and everything was fine until I do now.  The media player works when I open the program and just run or burn a CD.  I can also listen to live radio on my computer but nothing of a Bank of audio that uses the media player.
  

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _______________________________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  and make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Getting the error "your computer hardware should be upgraded" during the upgrade from Windows 7 to Windows 8. 1

  Hello

  I recently bought a DVD of Windows 8.1 and when I try to update my Windows 7 to Windows 8.1, I get error "your computer hardware must be upgraded. I have Dell Inspiron N5110 notebook with Windows 7 Home Premium 64 - bit Service Pack 1. The laptop is running on Dell BIOS A09. I did a google search for this error and found that I need to update my BIOS to version, but most of the reviews in said Internet Dell BIOS A11 running 'black screen' after being upgraded to Windows 8 or 8.1. How can I solve this problem to upgrade my laptop for Windows 8.1? Any help is greatly appreciated!
  I thank very you much in advance!
  Thank you
  Srini

  Contact Support latest Tech Dell to see if they have an update of the BIOS.

  http://support.Dell.com/

  Note: Have your number of practical service.

  Also before you upgrade do a backup of Windows 7 Image just in case the issue of the "black screen" is not resolved. The Image will allow you to restore Windows 7.

  EaseUS Todo Backup Home V6.1 http://www.todo-backup.com/
  Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Version 6.1 supports XP, Vista, Windows 7, 8 and 8.1

  Acronis True Image 2014 - has a 30 day trial version available, trial key sent by email.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, only pick up is available when booting from a Bootable Acronis media.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/products/TrueImage/#resources
  2014 supports XP, Vista, Windows 7 and Windows 8

  J W Stuart: http://www.pagestart.com

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• tried several times to install 4 important windows updates gives me error number 646

  tried several times to install 4 important windows updates gives me error number 646.  Help

  lalicew40,

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automated Microsoft Fix it 50461 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/2258121>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50461.msi.

  06/14 / 1101:10: 57 pm

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• The computer is not automatically connect to the printer

  Sorry, I don't know exactly where to put this question, looking for any help I can get.

  Hi, I work with someone who has a range of printers hp 2035 connected to a desktop computer running windows vista. another person has a laptop running windows 7. It obviously takes the laptop home, and every morning when he connects to his computer laptop back to the network it can see the printer, but not to print on it. HOWEVER, it can print a test page, and after that, it is good to go, until his laptop computer goes idle, date to print a test page to print again to it.

  Looks like the computer is not automatically connect to the printer, but idk a permanent solution, guessing just a bit at the moment and it made the test page thing, but is a bit of waste paper right? any help would be appreciated.

  Original title: thing of strange network printer

  Hello

  Method 1: Run the network troubleshooter, and see if it helps.

  Using the network troubleshooter utility in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you perform the steps described in the article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows    

   

   

  See also:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps.

• Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Error code: 0 x 80007114

  Operating system Windows XP, at startup, I get the message: "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full"and displays the error code: 0 x 80007114.  (I have a new drive hard with enough space) Outlook Express always open well and functioning normally.  The message mentions and how to fix the problem?  Thank you, Rick

  Jump here (nothing Bruce suggested is false), I did a search and found this old article (http://support.microsoft.com/kb/245419), which indicates that there is a bad entry under the identity key in the registry (see www.oehelp.com/backup.aspx for background).  So if it's a big problem, you can do the steps suggested in this article and that will fix it.  Or if you have just one account, then backup your settings and the identity key and then delete the identity key and then start OE and it will establish a new, and you can then set up your account again, and then import the messages from the older directory.  But it does not indicate the major corruption, so you can just ignore it.

  Steve

• Not able to launch Windows mail get "your computer may be in memory or your disk is full (0x80004005)".

  Original title: Windows mail does not open

  When you try to open windows mail it comes up with the following: Windows mail could not be started initialize junk filtering.  Your computer may be in memory or your disk is full (0x80004005)

  Then when this compensation have the following come upward: Windows could not start because MSOEDLL could not be inialised.

  Hello

  Sorry for the delay in response.

  Try the steps suggested by "Ahmed Cookis" of the link.

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-windows_vista/cannot-open-Windows-mail-error-Windows-Mail-could/62647f2e-d9b4-4ae3-B07C-8224fec4fe1f

  Answer if you need help with Windows, and we will be happy to help.

• trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

  trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

  Hello

  in this case, contact the HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  or HP Support forums

  http://h30434.www3.HP.com/

  or repost in the correct forum for windows 7 that I have already advised you to do