After the Lightroom CC upgrade, my images have lost all data in the history tab of the develop Module. The settings are kept on the right side of the module, but the history is empty.

Similar Questions

• Health & activity log have lost all data

  Recently, I noticed my health application has lost all it's data, and it doesn't accept new data, I try to enter.

  Then I realized that the watch business journal is more what my Apple Watch is recording, it is also empty with no historical data. Out of work I save appear also not in myfitnesspal app.

  My husband has the same problem. I' tried be to restart, restore, affecting my watch, play with all the settings, but cannot get it to work again.

  Hello

  See if it is calibrated help > calibrate your Apple Watch for improvement of accuracy of training and activity - Apple Support

  If this does not help, pair of UN and re pair > pairing your Apple Watch and Support Apple - iPhone

  And make sure that the iPhone iOS is updated. Tap Settings > general > software update

  And make sure that the OS of the watch is up-to-date. On the iPhone open the app shows and then type general > software update

  Update the software on your Apple Watch - Apple Support

• I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  Please try the steps mentioned in the Adobe Photoshop Lightroom help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  You can check 6 Lightroom displays a blank blue screen with an X through it in the module development for all the photos of my reference.

• I have an overlay in the "Develop" Module but not in the other modules. What can I do?

  I have an overlay in the "Develop" Module but not in the other modules. What can I do?

  The GPU acceleration works on some computers and not on others. If everything works properly with disabled GPU acceleration should be the parameter, you must use. The function does not in Lightroom automatically faster. I don't have a dedicated in my computer graphics. But I understand that the main advantage of having the GPU acceleration for users who have monitors high resolution.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• I have a PC and I have lost all my playlists

  I have a HP PC. After that last set iTunes to update, I have lost all my playlists. I have all my music but none of my playlists. How to make a comeback?

  
  

• When I upgraded my extesnions 11.0 all disappeared, he says that I did not add ons. Where are they? s

  When I upgraded my extesnions 11.0 all disappeared, he says that I did not add ons. Where are they?

  If these messages have solved your problem, please click "resolved." This archived this thread, so we can focus on other support tickets. Thank you!

• XP and have lost all my photos/videos - cannot find anywhere (help) grateful suggestions

  XP and have lost all my photos/videos - cannot find anywhere (help) grateful suggestions

  Hello

  1 did you changes to the computer before the show?

  You can open the Recycle Bin and check if the deleted files are present.

  For more information, see:

  To remove or restore files in the Recycle Bin

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/to_manage_recycle_bin.mspx

  In the case where you cannot find the files in the Recycle Bin, you can download a third-party data recovery tool using your favorite search engine.

  Note:

  With the help of third parties Party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• CC says my LR trial has expired, but I pay $9.99 monthly for the LR / PS of photography plan, what happens on LR has disabled the develop module but PS works fine.

  CC says my LR trial has expired, but I pay $9.99 monthly for the LR / PS of photography plan, what happens on LR has disabled the develop module but PS works fine. I connect only a couple had a week to CC that has something to do with it?

  Please visit: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  I hope this helps.

  Concerning

  Megha Rawat

• ESX 3.5 and I seem to have lost all the networks.

  DL580 G4 with ESX3.5. I've migrated all clients to another ESX Server, but it went a bit strange to say the least.

  After the migration, all the guests off I went forward and add more ram and restarted. Server come OK, tells me the IP address to connect to (static) but that's all.

  I can ping 127.0.0.1, but not static host ip address, I get an error "connect: could not connect to the network.

  If I check the following localions I get zero information in files

  / etc/hosts

  etc/network-scripts/ifcfg-vswif0

  etc/VMware/ESX.conf

  If I try the list of network adapters that I get no NICs in the list, if I have the material list network get hardware type and mac address.

  I see no switch to vmware if I try esxcfg-vswitch - l

  I tried to restart the network and a few other services that I found on Google, now claim.

  If I start using ERD Commander and enable networking I can not use the 2 onboard NICs but can use 2 additional network cards / 4 ports and can ping / map of external drives.

  Hello

  I think it would be a case of corrupted file esx.conf. After the upgrade of the host by adding more ram or anything else, you may need to update the initrd image that you don't have and this translates into the corruption of your esx.conf file. Until that time, that it's the only imagination, I can take.

  Now, there are simple process of recovery of the original esx.conf file. Please see the procedure below.

  #

  Connect to the ESX host with a SSH client, or connect directly to the ESX with KVM console.

  #

  Back up the corrupted file esx.conf using the command:

  CP esx.conf /tmp/esx.bad

  #

  Copy the image into a temporary directory using a command similar to:

  CP /boot/initrd-2.4.21-47.0.1.ELvmnix.img/tmp

  Note: The version of the initrd image is different from the ESX 3.x. If the version in the command / tmp /boot/initrd-2.4.21-47.0.1.ELvmnix.img cp is different, cd to the directory/boot and run the ls command to see your version.

  #

  Decompress the image file using the command:

  CD/tmp

  gunzip - dc initrd - 2.4.21 - 47.0.1.ELvmnix.img > initrd.unziped

  #

  Create a directory and mount the uncompressed image using the commands:

  mkdir initrd

  Mount-o loop initrd initrd.unziped

  #

  Copy the file esx.conf to the directory mounted at/etc/vmware/en using the commands:

  CD/tmp/initrd/etc/vmware

  CP esx.conf/etc/vmware.

  #

  Remove the directory mounted in step 5 by using the commands:

  CD/tmp

  umount/tmp/initrd

  #

  Restart management agents for the changes to take effect.

  Now other solutions could be looking to recreate the Console of the ESX Service and see if that can help you. Procedure is as below:

  On your system, the vswif, vmnic, numbers of vSwitch and network settings are different.

  1.

  Run the following command to list the name of the map of vswif:

  esxcfg-vswif - l

  2.

  Run the following command to remove the adapter vswif:

  esxcfg-vswif - del vswif0

  3.

  Run the following command to list the name of the vSwitch:

  esxcfg-vswitch - l

  4.

  Run the following command to remove the vSwitch:

  esxcfg-vswitch vSwitch0 d

  5.

  Run the following command to create the vSwitch:

  -an esxcfg-vswitch vSwitch0

  6.

  Run the following commands to create ports for vSwitch default groups:

  esxcfg-vswitch - a 'network of the VM' vSwitch0

  esxcfg-vswitch - a "Service Console" vSwitch0

  7.

  Run the following command to create the adapter vswif:

  esxcfg-vswif - add-- ip = nnn.nnn.nnn.nnn-"Service Console" portgroup mask = 255.255.255.0 subnet vswif0

  8.

  Run the following command to verify that the settings in the network file are correct:

  sysconfig cat

  Networking = yes

  GATEWAYDEV = vswif0

  HOSTNAME = Host.domain.com

  Gateway = nnn.nnn.nnn.nnn

  9.

  Run the following commands to list all network cards and associate a vmnic which has a status of site link:

  esxcfg-NICS - l

  esxcfg-vswitch - L vmnic1 vSwitch0

  10.

  Run the following command to verify that the vmnic is associated with the vSwitch:

  esxcfg-vswitch - l

  11.

  IP address ping to verify network connectivity. If the ping fails remove the previous vmnic from the vSwitch and try another adapter that has a

  State of the link towards the top.

  esxcfg-vswitch - U vmnic1 vSwitch0

  esxcfg-vswitch - L vmnic2 vSwitch0

  12.

  Run the following command to change the ID vlan a vSwitch

  # esxcfg - vswitch - p "VM network 1" - v 10 vSwitch0

  13.

  If you make manual changes to sysconfig, run the following command to restart the network service:

  service network restart

  If you find this helpful please mark some reward points for this.

• Tried to change the desktop image and lost all of them.

  iPhoto was opened I was looking for an image specific, but also decided that it would be a good idea to multi-task with my iMac and tried to change the image of the desktop at the same time. Apparently, it wasn't the best idea. While seeking photos through system preferences, a pop-up asked if I wanted to pass something. I'll tell you... I didn't read entirely, but thought that he wanted to reopen iPhoto in System Preferences, since I had the app open on its own. I clicked 'OK', which seems to be the point of civilization to collapse, as it appears that I lost all the photos stored in my iPhoto library! What I did and how can I fix? Everyone?

  Hold down the option key while launching iPhoto and using more select Library window select the correct iPhoto library

  If somehow you deleted it (nothing you described in your question can result in the deletion of the iPhoto library) and then restore your backup iPhoto library until you have removed

  LN

• I have lost all THE task including the Firefox task bars bars, am not able to add or close tabs

  I lost all THE bars of tasks including taskbars Firefox and am now only able to add or close tabs

  This has happened

  Each time Firefox opened

  Is earlier, when I clicked on the taskbar by mistake clicks

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• I need my 25 product key code; What should I do if I have lost all my gear in a recent decision of the House?

  Yet once, what should I do if I lost all my gear in a recent House move?
  Is there anyway to get this 25 product key code?

  Hi, go to this site below a jellybean UN software download it zip and run in your operating system and it will find the product key.

  http://www.magicaljellybean.com/KeyFinder/

  Slan go foill, Paul

• Satellite Pro L450D - 12 X - have lost all updates

  Suite asault malware (Win 7 Anti-Spyware), got rid of him, but lost all the updates of windows and security, Microsoft error reports whenever I try to install manually since having to return to the "system image". All the restore points are missing, it cannot create floppy disks to backup or restore points as windows applications installation disc, which I n t I.
  XMA computer s girl on home access program.

  Have installed spyware terminator for temporary protection and restore point creation but computer is slow and unpredictable, the internet is a nightmare and I m a perfect beginner on a learning curve!

  All the answers/help is greatly appreciated.
  Or the only answer (expensive) professional assistance?

  Hey,.

  If your computer is affected with a lot of viruses and malware, you must perform a Toshiba Recovery disk recovery facility. That s the only way to get rid of this 100%.

  So save your important data to an external drive. After that, boot from the Toshiba Recovery disk and follow the instructions on the screen to restore the original settings of the case.

• WEIRD! Can't see the settings I do them in the develop module, but they THEMSELVES... what gives?

  I use LR 5.7 completely up to date. All image previews are displayed in the library module, and when I move to the develop module, the selected image is displayed in the Central (to the magnifying glass) window as expected. BUT if I make any adjustments - that you use the presets or simply tweak individual sliders - the image disappears instantly and the central window becomes gray. Unknown yet, the adjustments ARE made and are listed in the history tab, and if I switch back to the library module, the adjustments are reflected in the preview. Of course, I should be able to see real-time adjustments I do them in the develop module, as I always have before.

  Anyone know why this is happening?

  After some research, I found the answer. It was a bad monitor profile. I had not updated my software to calibrate colors in a certain time. Created a new monitor profile and... Presto, problem solved!