After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything


1. what operating system is installed on your computer?
2. is it works much earlier?
3. don't you make changes before the problem?

Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.

I suggest that you follow these steps and check if the problem persists.

Step 1:

Update of your display drivers and check if the problem persists.

Step 2:

Reduce hardware acceleration and check.
a. click the Start button, Control Panel.
b. now, select appearance and personalization. under display, select adjust screen resolution.
c. now, select adjust the resolution.
d. click Advanced settings.
e. now, click the Troubleshooting tab, and select the change settings button.
f. in the Security dialog box, click on continue.
g. move the hardware acceleration slider to the third notch.
h. click OK.
i. restart Windows.

Step 3:

If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.

Tags: Windows

Similar Questions

  • When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

    original title: HELP ME PLEASE!

    (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

    Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

    Take a look at this:

    Hope this helps

    Post back if necessary


    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.

    I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.  When I click on the icon and open to the top it says cannot load and a flag of resolution comes up saying it can't run a resolution less than 1930 x 2300. I have no idea what this means and how I can solve this problem.  I thought that maybe the application was bad, so I deleted and then added it back on and it does the same thing.  I even did a restore of the system to try hard but nothing I did the work.  So, how can I solve this problem.  I'm not a computer genius, so he must be explained in simple easy to understand instructions.


    I suggest that you view in Mozilla Firefox community because there seems to be a Firefox problem.

    Some examples of the problem:

    «I can't open Firefox, it says could not load xpcom.» Who is wrong? »

    "I get an error"Unable to load XPCOM". I know that I can reinstall Firefox, but how do I save my favorites?

    'Error message cannot open the XPCOM and impossible to open ALL pages '.

    Here is a YouTube video on fixing this error:

    See you soon.

  • I'm playing True Crime New York City on windows xp and every time I'm trying to play the screen goes black and then I'm back at my desk.

    Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.

    Hello Respect137, welcome.

    It would appear that running DirectX files installed on your system were corrupt. This gives a test:
    2 follow the instructions which is there to install the package to update DirectX
    3. Once installed, restart your computer and try to run the game
    Let us know if this helps,
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I save by iPad 3 when the screen is black and nothing appears?

    How can I save my iPad in ITunes or iCloud 3 when the screen is black and nothing appears?

    Is the empty screen, because just the screen is broken, or is the iPad just dead? Have you tried a soft-reset/reboot it?

    At least you can see what you touch on the screen of the iPad, you cannot force a backup to iCloud.

    If the iPad still works and is connected to wifi, a backup should automatically happen (if iCloud backups are enabled) if it is connected and the locked screen.

  • screen saver; have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

    I don't know what is causing this problem but would be
    suspicious, it is related to a corrupted or obsolete
    video driver.

    Might be interesting to try to reduce your graphics
    Hardware acceleration instructions
    in the following article.

    How to put in back of graphics hardware acceleration
    (scroll down to: "If you are using Windows 2000 or XP")

    If they improve the question, you should look for the
    site Web of MFG. your video card
    a updated driver Win XP compatible video. Or...
    If your computer is a laptop... Search support
    site of the manufacturer of your computer.

    If you do not know the make and model of your
    Video adapter, see the documentation that
    supplied with the computer.

    Also you can find info on your video by driver
    go to Device Manager: you can launch
    By clicking Device Manager on... Start/run and
    type or copy / paste:
    And then press ENTER.

    Expand "Graphics cards" and right click
    the name of your graphics... then
    choose... Properties / tab pilot... FYI.

    You should find the make and model of your
    adapter display as well as the version of the driver.

    If the driver on the Web site is no longer
    current than you run...
    Download and install it. In addition, installation
    instructions that should be followed closely
    should be available on the support site.

    Once installed the new video driver... you
    can restore your full acceleration.

    Good luck...

  • Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

    original title: Auto Adjust


    Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

    I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

    Any help would be appreciated... Thank you

    Try this:

    Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.


    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable

    When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable. It happened all of a sudden I used he linked TV to catch-up on TV episodes until last night when it happened out of the blue!
    Can someone please help with this.

    Contact the manufacturer of your laptop.  Also - that there might be a key combination for your laptop that changes the screen from the main output is - look at your documentation or on your keyboard for such a combination of keys (what kind of computer is? Make & model...)

  • At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

    When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

    I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

    The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

    Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  • I click on "SET UP" on my Motorola XOOM and the screen goes black and does not settle. " I have uninstalled and installed the man times. What to do next?

    Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.

    By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.

    We are working to solve this with the creation of our Tablet UI.

  • Qosmio G20 with TV (s-video cable) - the screen is black and with

    Hallo and another question by me... when I connect with the TV using the s-video cable still the TV screen is black and white, I checked this on two different TV, is always the same, and even when I am felt for the settings of the card and when I'm changing color options nothing happen Thanks for your help

    Hi again

    As far as I know if you connect your device to the TV, check the settings for S-video on the TV.

    By the way:
    All new TVs from 70 cm to the top screen diagonal must effectively control S-Video connection on SCART. However, this should be enabled in some cases. If the image does not appear in the color anyway, your TV doesn't support certainly S-video. In this case there are adapters that allows S-Video Composite video (RCA cable). You can find it in all the electronic stores.

    Good bye

  • at idle, the screen go black and says cospla 1scr does not work

    When the computer is idle for long periods of time, the screen turns black with notice cospla-1SCR microsoft looking for correction does not. This happened for several months now.

    What program is it and can I remove it does not, and microsoft has no answers to fix it.

    I think the message is Lightn ~ 1.SCR. That would be a problem with the screen saver you have.

    Go to control panel of configuration, appearance and personalization or customization in Classic view, and then click Change screen saver and choose something else.

  • the screen is black and all the lights are on do - what I do?

    When I turn it on all the lights turn on but the screen is black


    Before you attempt this procedure, the judgment of the laptop, remove the AC adapter and then hold the power button for 20 seconds to dispel any residual charge in the motherboard - do this whenever you stop before changing/deleting modules.

    Try to remove one of the memory modules and see if the computer will start.  If it is not, move the same module to another location and try again.  If it still does not start, remove the memory module and repeat with the other to see if any combination will allow the laptop to start.

    A video and a description of how to remove the memory modules is on the link below.

    Kind regards

    DP - K

  • my laptop seems to have burst. The screen is black and it is not connected to the internet, bu it's on

    The laptop would go sometimes dark, I would slap the mouse pad and it would come - it was a few months ago. In recent weeks it went dark while listening to something on the internet, I have to stop it for a few minutes, but he could return and sometimes come back by touching the mouse pad. The days he did it more often, and now he won't even after leaving it out overnight. It's as if he didn't want to be used for many hours a day. The internet light would not come and I hear it run slowly. I bought a supply of malware from the Web to a 'partner' sites (not me remember not the company name =------, on May 24, 2012, and that they were supposed to provide technical support for 2 or 3 years.) However, if I can't see the screen, I can't use them.


    Thanks for sharing the information. In case, if you need help, you can always after your questions related to Windows and your valuable suggestions in the Windows forum.

  • When turning on my computer, the screen is black and I can see only the cursor, how can I fix it? Help, please.

    I think I have a virus or a virus that I was invited then in a different line of pop ups for unwanted ads and many ads of anti-virus indicating that I had the virus.  Last night my computer worked but when I turned on the screen shows my windows option then turns black with only the cursor visible.  I can access the Task Manager by simultaneously pressing Ctrl-alt-delete, but I'm not too handy with computers.  Any help would be greatly appreciated.

    Thank you.


    If you can open the Task Manager try to manually open the desktop computer

    In the list of running tasks, type "explorer" (without the quotes) and run it.

    Which starts the desktop computer?

    If not boot in safe mode and try to load a restore point from before you had the problem.

Maybe you are looking for