After the memory was updated by Satellite Pro M won't boot to the top

I bought 2x512mb ram 1024 MB but if I put a stick in slot 2, in that my laptop will not start Windows (the bios boot and restart)
memtest gives errors, I tried other sticks.
they work, but if I put them in the 2 slot they give an error
(is my slot is broken if so, how is it possible I've ever used and I know how to place the memory)
the first time, I placed the memory I started with memory, it worked fine (I ran a memtest for about 30 minutes (everything was ok), I went and started my laptop again later.)

I ran the memtest and there were errors

In my opinion, you are trying to use incompatible RAM modules.
Please use the RAM modules recommended by Toshiba

Tags: Toshiba

Similar Questions

  • Satellite Pro A10 won't boot up - where to get the disks

    I have a Satellite Pro A10 that currently does not start up Windows (XP) as it says

    The following file is corrupted or damaged:
    C:\windows\system32\config\system

    Tools & Utilities CD that came with my laptop has unfortunately been scratched and will not start.
    I have two system recovery disks, which are very good.

    My questions:

    1. is it possible to buy a replacement Tools & Utilities CD-Rom?
    2. If Yes, where to go?
    3. is there a way to restore my laptop without having to reinstall everything completely and lose all my files?

    Thank you

    Post edited by: Stuart_2007

    With regard to the point;

    (a) generally, it should be possible to order the CD of tools & utilities but I ask why?
    (b) you can buy the CD of the ASP in your country
    (c) the older recovery CD is supported by an expert mode. You can use this mode to choose the partition where the OS is to be installed. In this case only, this partition will be formatted.

    But look, man. You do not need to order the CD tools & utilities because on this CD, you will only find the Toshiba drivers can be downloaded from the Toshiba page too.

  • After that v1.90 updated by Satellite Pro A300-1EA BIOS won't boot to the top

    I just upgraded my laptop the new BIOS as indicated in the title, but after that program it my computer won't start at all upward. I just get a blue screen with her asking me to do a CHKDSK because there might be a virus or hard drive is not connected correctly (when it comes), and he keeps just reboot.

    It does not start in SafeMode either. Someone else had the same problem and if so, how to get back my laptop? :(

    Thanks for any response.

    Hello

    What model of laptop do you have exactly?
    Have you tried to install the OS by using Toshiba recovery image?
    It will be interesting to know if your laptop will again works well with the factory settings.

    Try to start the installation of recovery to see if the menu on the right will appear on-screen.

  • Satellite Pro A10 won't boot to the top

    I really hope someone can help, my laptop suddenly stops. Since he stopped, I can't charge the laptop in any mode including safe mode. It happens on the screen as much as windows xp with the bar running along the bottom, but that's.

    in safe mode simply load the drivers and then simply do nothing

    any help would be appreciated as long as it's not yet my laptop

    Hello

    It is possible that the HARD disk you are using has bad sectors. You can check this with different tools. I can recommend HDD regenerator. You can also try PowerMax 4.23.

    Google around and you'll find useful info a lot on this topic.

  • Satellite Pro L10 won't boot to the top

    I am a L10 for a friend, at the moment when the cd and turn it on, the snoring of fan upward, the disk hard led flashes several times climb the towers, but nothing beyond what is happening. The display shows life, no beeps comes off it is just here doing nothing with the power light on and whirring of the fan.

    So far I tried to connect a monitor to the vga no signal of the port. Put a linux boot cd in the drive, it runs and sounds like its access but I don't think that his startup, the screen is certainly not, and the hard drive is silent. Finally I tried to take the battery out and running of the network. It doesn't change anything.

    So for the moment I can not any diagnosis and I have no idea what could be wrong with him, anyone have any ideas?

    Hello

    As you have described it of very difficult to say what's wrong.
    It seems like it might really be something wrong with the hardware because you can not see the home screen Toshiba at the beginning of the initialization.

    I put t don't know if this helps but try to remove the battery to form several times unplug and wait 30 min power (can t tell the time exactly) try to reinsert the battery and connect to the mains. Try to start again.

    If it doesn't help I guess you will need additional assistance of a technician.

  • Satellite Pro L850 won't boot F2, F12, C & 0 do not work

    My Satellite L850 race that Win7 does not start, after that power on it alternates between dark grey and light screen.

    I tried holding C and 0 when blood work or fact by pressing F2 or F12. No new software has been added recently. Please, any help appreciated, thanks.

    After reading your ad, it is not easy to say what the problem is here. He started from one moment to the other, or you did something that may be responsible for this?

    Are you sure display is not faulty?
    If possible try to connect your laptop to external monitor and start again to see if something pops up on this subject.
    Disconnect the power and remove the battery. Press the power button / stop for 20 seconds and leave it for a while. Only connect the power supply and try to start it again. Test it with external display.

    Maybe the BIOS is screwed up. Perhaps is troublemaker GPU. On this virtual path, we can only speculate what may be the problem.

    By the way: when you turn on your laptop doesn't it stay ON all the time?

  • Maximum memory recognized for a Satellite Pro 4340

    Read the previous posts about the extension of the maximum memory for a laptop Satellite Pro 4300 series suggests that the possible maximum memory upgrade is 320Mo composed of 64 MB on board more than two banks of 128 MB (128 128 64 = 320). I asked Toshiba in England if the SP 4300 range will recognize the PC100 256 MB memory modules, but they couldn't give me a definitive answer one way or another - just that they had tried to 128 MB with success modules. However, the specifications of the machine have been written before 256 MB modules were generally available, and so I would like to ask the following questions of the readers of the forum:

    1. someone has actually tried a bunch of 256 MB of PC100 memory in banks of memory your laptop series 4300 SP? -If so, what was the result?

    2. even if the maximum memory that can be recognized is always set to 320 MB, this could be achieved by simply using a bar of 256 MB and 64 MB on board?

    3. has anyone actually tried to put into one or two modules of 256 MB memory in the memory banks and see what happens? Are they recognized?

    It is clearly an expensive experiment to try then I would hear earlier for other people who may have already explored these options rather than buying the memory myself to see what is not recognized! I'm really interested in hearing from someone who has actually tried what I mean above (and either successful or failed) not of someone who has read the specs on the Web from Toshiba site that says maximum memory is 320 MB and then a few citations that back for me.

    Hello

    I found exactly the same info on the memory modules. You can use the 128 MB module with PA3005U - 1 M 12 part number.

    I have gift? t understand why you want to use this module of 256 MB. If you want to have the maximum performance, don? t complicate just use tested parts and enjoy life.

  • My Satellite C660-155 won't boot to the top

    My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

    It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
    Any advice would be greatly appreciated.

    For better understanding, you must offer more specific information.
    You can enter boot options using F8 at startup?
    Figure option fix my computer in the list?
    You can boot OS in safe mode?

    Did you create the recovery disk?

  • The upgrade memory and HDD on Satellite Pro A300-1EA

    So, I'm new to this forum so first of all Hello to all!

    I plan to buy the Satellite Pro A300 1EA and I came to the conclusion that I need to buy more memory that the thing has already installed (2 048 MB).
    I tried to search for information through Kingston and OCZ, but have not found something solid on what memory modules are supported by the A300-1EA.

    The A300-1EA uses DDR2 800 Mhz type of memory (max 8192MB) instead of just dealing with one module 2084 installed, I had intended to get two of them.

    What I have to buy two identical modules, or can I increase memory by simply adding a module to match installed?
    So if anyone has an idea where I could find on the modules of memory supported, that would be swell! :)

    The other thing is quite the same, but only with hard disks. I found many potential readers than fullfill my needs for a faster drive (upgrade of 5400 RPM / min-> 7200 RPM), but I don't know which ones work with this laptop.

    After all, I'm in the impression that laptops are not so easy on these pieces as desktop computers.

    Thanks in advance!

    Satellite Pro A300-1EA belongs to the series of PSAG9E, and it seems that it was fitted on the Chipset Mobile Intel GM45 Express.
    As far as I know, that you can improve this laptop 4 GB RAM max so I wonder which tells you something about 8 GB support.
    You can upgrade the memory to 4 GB, and you can use the 200-PIN SODIMM 800 MHz modules.

    But to be honest I don t understand why you want to upgrade if the 32-bit Windows operating system will see only 3.2 GB due to the limitation of the 32-bit operating system.

    With regard to the drive HARD;
    You need a HARD drive 2.5 SATA.

    Concerning

  • Can I increase the memory on my old Satellite Pro P100?

    I have a Satellite Pro P100 (P6PA4E-002001EN) with only 512 MB of memory and the desire to know if it can be increased and if so what memory should I buy and it is easy to open the machine and adapt?

    Hello

    You can increase the memory on this laptop amazing plu of 4 GB of RAM.

    RAM modules compatible that you can use to upgrade:
    PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
    PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
    PA3513U-1M2G (memory 2 GB DDR2-667 Kit)

    Check the underside of your laptop and there should be probably set with a cover of Ram screw. Remove it and you will have access to the memory locations.

  • Cannot install the update for Satellite Pro A200-E7E - bad series flash cards

    Hello

    I tried to install the utility to update the flash cards for Satellite Pro A200 E7E model and it will not complete installation, saying: wrong serial number.

    My model is without a doubt listed in the updated information, and it is available on the page of updates for my model.

    Help!

    Something similar has already been described here in this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31779&TSTART=0

    Maybe you should check this!

  • Update on Satellite Pro 2100 display adapter

    Is it possible to upgrade my display on my Satellite Pro 2100 adapter? I currently have NVIDIA GEFORCE4 420 GO to, with the latest version of the driver 4.5.9.1.

    Thank you

    Hello

    Sorry for the question, but you do need to update?
    The graphics of the screen card or the color TFT screen?
    Usually it of not possible to update the graphics card. The graphics on the laptops card resembles a small chip that attaches to the motherboard. It s not the same device on the desktop PC.

    This device was shipped with a color 14.1 TFT "(1024 x 768) screen and a 15.1".
    In this case, it is possible to use this two TFT screens.

    Good bye

  • Satellite Pro L870-18R - no boot after upgrade CPU

    Hello

    Bought the "SATELLITE PRO L870-18R" alongside a "Intel Core i7-3740QM 2.70 GHz FCPGA988 L3 6 MB 4 Cores CPU 2.70 GHz" to upgrade the processor and get a beautiful machine.

    Boots of machine as expected with its stock i3, but white LED will blink once and no post when upgrading the processor is applied.
    Is their a bios that will support this CPU, otherwise what is the max processor that toshiba will move to. Little bit discouraged, I can't upgrade.

    Is their a bios that will support this CPU

    BIOS updates are not released to allow new media of CPU, but the BIOS updates are released to fix possible problems for laptop...

    If this is not the case, what is the max processor that toshiba will move to. Little bit discouraged, I can't upgrade.

    Still is it that manufacturers of mobile phones do not support updates on own laptops... This means that there is no further information on the possible processors and supported.

    However, a new processor usually requires a BIOS and chipsets support... so in case you want to make these updates (of course only at your own risk) then you will need to use a CPU that is supported by the Intel Chipset. But there is no guarantee that this notebook would functions even if you use a processor that would be supported by the chipset...

  • Need of repair for CD-rom update on Satellite Pro L20

    Hello
    Is there anywhere I can download a repair manual for Satellite Pro L20 that I just bought a dvdrw drive & want to adapt it myself

    TIA

    Hello

    Unfortunately, you won't find manuals repair on the Toshiba site. Only Toshiba service partners have such documents and the ability to use laptop manuals.
    As far as I know, the reader is fixed with a screw that is placed at the bottom of the unit and under the keyboard.
    After the withdrawal of these two screws, you can disconnect an optical drive to the connector on the system board.

    But without any experience, you must remove all readers. I think you should ask the service of Toshiba for help because he has more experience in such cases

  • Updated by Satellite Pro 6000 with a DVD burner - technical question

    Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
    He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

    But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
    Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

    Someone here who can help?

    Thanks in advance! lionesse62

    Hello

    You need a special screwdriver to remove the module bay select (CD/DVD drive).
    A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

    I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

    However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

    (1) turn the computer
    (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
    (3) slide the lever and pull place the selectable bay module.

    After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
    The frame is blocked with five super flat head white M2x3 screw.

    As I said, if you can not remove these screws and then ask a technician for help.

    Good bye

Maybe you are looking for

  • HP Envy Rove

    I have a PC desktop to envy of wick. The display shows points as he is affected in several places AGAIN. This happened just as the previous edition of nowhere. It sits right on a table and I bring it with me (don't have also any children that might b

  • Add music to MicroSD

    I got the freebie MicroSD card, and music is not just the stuff I normally listen to.  How to remove music that accompanies it and add my own?  (Idea... Use the detachable stand for Christmas music!)  If I look in the Explorer, I see the Sansa Fuze 8

  • I can't change the DPI scale because the area to apply it is not visible.

    I recently changed my DPI scaling to larger text and cannot change because the area apply is not visible.

  • Outlook on phone Android - calendar sync problems

    I just installed Outlook on my Android HTC. I use an email non-Outlook.com and it works fine. I have also all my emails it on the phone and contacts. If everything looks ok. My problem is that the calendar has nothing of my appointment synchronized f

  • Photosmart C7280 double sided single local option

    The option aside Doubble "Automatic" is only accessible local PC connected. This option does not appear for networked PC and not the wireless connection. How can I fix it?  All Windows 7 machines.