After the repair of the blue screen, have to choose between Windows Vista or Windows recovered at startup
Recently had a blue screen of death issue and had to repair windows vista. Now every time you start computer I have to choose between windows vista and windows recovered. How can I remove the system recovered as I start successfully on windows vista option every time.
rtoakey
(b) click Start
(c) type msconfig and press ENTER.
(d) click the Boot tab.
(e) select the entry that reads Windows recovered or reclaimed Windows and then click on remove.
(f) click Ok
Tags: Windows
Similar Questions
-
Acer laptop does not start after the blue screen
After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen. Tried to open the case and clean the Fan & Heatsink heat to air without effect.
The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.
But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached. Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).
1. try the system restore.
2. try to do a startup repair disk.
3 acer Recovery Options.
4. contact Acer.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not work, try to make a Bootable ERD to do a Startup Repair:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Acer eRecovery made
1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.
· The unit is able to reload Windows from this mode faster then CD.
· The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.
· Users are able to change the password in this mode for eRecovery only.
· The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.
· It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.
2. in Windows, there are 3 ways to access eRecovery functionality.
· Press Alt and F10
· Open Acer eManager and then double-click eRecovery.
· When a system is new it should automatically open this application and invite you to do the recovery media.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.Acer.com/worldwide/support/index.htm
See you soon.
Mick Murphy - Microsoft partner
-
USB-6009 not recognized after the blue screen of death
I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output. The USB box - two 6009 were previously works very well on this PC. Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC. I not save the information of the blue screen of death. When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX. The Green LED on the USB - 6009 s do not come. The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device"). If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED. If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.
I am running Vista, Labview 8.5 and NOR-DAQmx 8.9. I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager. Any advice on how else to solve it? Thank you!
The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.
-
Cannot start after the blue screen "page in the nonpaged area failure."
My sons laptop has got to me. There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.
I tried all F8 options, without success. I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not. I ran diagnostics memory on the scope option and who found nothing.
No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!
I would be grateful for any suggestions that anyone can have. I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?
Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death. They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.
I hope this helps.
Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Upgrade to LR4 after the blue screen of death
I got LR3 and that he would upgrade to LR4, but before I did my computer crashed (does the blue screen of death). Have reformatted the hard drive and the photos re-installed but not LR yet. What I have to reinstall LR 3 and then install LR4, or can I go straight to the installation of LR4?
You can directly install LR4. He will ask only for the LR3 serial for verification.
Mylenium
-
Lenovo z50-70 used power up after the blue screen of death on windows 10
Hello Sir/mam,.
My laptop wouldn't boot / lights up once the blue screen of death appeared this morning.
I am browsing and suddenly the blue screen appeared and I remember in the written form 'system error' and the laptop will restart. something like that. I can not really remembered the exact error. But I'm sure it's the BSOD.
When I tried the laptop powered, the power light was for about 1-2 sec even with the fan, and then they continue or let's just say that it will not feed. I've done several times, but the result is the same.
I also tried the solution on what I read here in the forum. "Press and hold the power down for about 30 seconds."
I tried too many times but it won't work.
Please help me to LENOVO.
Thank you
Thanks for the reply. I already solve the problem. I already did what you said so many times, but did not work.
I just discovered that one of the ram is not working. That's all /... case closed
-
Is there anywhere to get a new copy of the system recovery disc for my windows vista computer. I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows. The recovery discs that I burned when I bought the computer do not work. What are my options?
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
With HP normally press you F11 at startup to start the process of recovery from the recovery partition
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
If the problem persists with the recovery process, contact HP
http://welcome.HP.com/country/us/en/contact_us.html
or try HP support froums
-
Mozilla Thunderbird will not start after the blue screen.
There was a program that was supposed to update the drivers but caused a blue screen. I had to go back to a previous point of reset to get Windows 7 running again. Now Thunderbird gives me an error "could not load XPCOM" at startup. What should I do?
I solved the problem as follows:
1. turn off the antivirus software.
2 delete the program folder in Thunderbird, C:\Program Files\Mozilla Thunderbird (Windows 32-bit) or C:\Program Files (x 86) \Mozilla Thunderbird (64-bit Windows) by default.
3. use the browser to download the Thunderbird installer on the Mozilla site.
4 reinstalled Thunderbird by running the installation program.
5 turn on antivirus software. -
IRQL - NOT LOWER OR EQUAL and Stop: 0x0000000A (0 x 0, 00000002 00000001, 0xF7C88044, 0 x 80527470)
After the blue screen, a message will appear asking if I want to start Windows normally, the last configeration who worked, safe mode, etc. Whatever the mode, I have chosen, the system returns to the blue screen and the process starts all over again unless I turn off the computer.
I reset my computer to its factory settings, but the blue screen issue continues. Is there a way to fix this?
Hi ARZ1,Follow the steps listed in the article below and check if it helps you: -
SignalExpress closes immediately after the splash screen
I'm having a problem with the Software NI SignalExpress where the application fails to open completely - it closes immediately after the splash screen. I am using windows XP Pro. SP3.
I tried to uninstall, registry errors compensation and reinstall, I also tried the repair installation - or who work.
A test of SignalExpress installation was installed on my PC until I got a full copy with the purchase of a data acquisition (usb-6218).
Hi André,.
Sounds a bit nasty. If repairing and reassembling and all this malarky does not recommend the use of msiblast to clean your computer of all the software of NOR and starting again with a new install. When you software uninnstall he didn't get rid of everything, there is still hidden folders around dootted.
I joined msiblast.exe.
-Run msiblast
-Make sure the radio button "Show OR installers only" is selected.
-Select all and then click on uninstall.
When this is complete, your computer will be NOT free. After that;
-Install all software from OR you for example LabVIEW Signal express
-Then install the drivers. The USB-6218 case uses the DAQmx driver that the latest version can be downloaded from this link.
If it persists then write again.
Kind regards
-
Can't reinstall the display device after you have uninstalled due to the blue screen.
As I said, my display has led me to get stop the blue screen I believe because I tried to update the driver for my laptop screen it is so using secondary TV monitor via VGA black. I thought that the driver update would fix it but I got the dreaded blue screen. Now im thinking im going to uninstall to reinstall the driver but no luck. I should have listened to the little voice in my head, trying to tell me NOT to try it on my own, but I thought ID try UH a little help... Please? Thanks in advance.
Bobby U.
Hello
Make and model of the computer?
Go to the manufacturer's website and install the latest chipset drivers, and then try again to install the device driver.
Doc from Sony on the installation card driver
http://www.Sony-Asia.com/support/FAQ/270823
Is there a display error code in Device Manager?
What is the error you receive?
It locate dump files in c:\windows\minidump
Download the file to your account of OneDrive (formerly SkyDrive) and post a link back.
-
I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death. with the details of error like:
Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.
I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode. I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.
Help!
Thank you.
So yes actually hear nothing helped me. Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD. Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive. After doing this, I was able to do a boot repair, who led for the BSOD. Not sure how that actually fixed, lost about 10 hours of my day. So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.
I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.
Problem is solved, had to go back to a previous version of good boot where I have not install updates again. Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.
Nice day.
Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:
-
I got the blue screen after update
Hello. I got a bluescreen error after update my entire system today. He wrote:
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1030More information about the problem:
BCCode: 116
BCP1: 85F5C510
BCP2: 8E813DE0
BCP3: 00000000
BCP4: 0000000D
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1And continued to restart every time I went into IE games, etc.
What should I do?Hello
Have you updated your screen/video or other great drivers latetly - check in Control Panel.
Updates of Windows to see if a driver has been loaded it. Use this generic utility below
and when you get to the section driver use the methods in the next message and then back to
the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
cause this error.Also check with the support of system Maker and video/display of the map because he could be called
questions - also check in their forums.BCCode: 116 0 x 00000116
Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
to reset the display driver and recover a time-out has failed.BCCode: 116 0 x 00000116<-- read="" this="">
* 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116---------------------------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available the onedrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there. (Analysis of thethe)
Minidumps is not necessary that you have updated the video drivers because it is
very often the cause of the issue and only if the BSODS continue.)Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html---------------------------------------------------------------------------------------------------
The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
special meaning (other than pilot caused bluescreens occur with some frequency).Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a period of time
instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all the)
possible driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Blue screen in Vista 7 just after the login screen
We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears. The blue screen immediately goes, and system restarts (or sometimes just hangs). I was not able to find the codes of the 7th in the research:
(took a picture of the screen...)
STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)
I am able to boot in safe mode. Do you have a chkdsk C: /F and which did not help. Do you have a repair system using the Vista startup disk and that did not help. Went to safe mode and MSCONFIG and position the clean boot and that did not help. I tried to update to SP2 and unable to complete safe mode.
The ideas and the sage advice would be greatly appreciated.
Pete
Hello
Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashCheck this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available from the OneDrive or other
file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.------------------------------------------------------------------
BCCode: 7F 0x0000007E which is also 0x1000007E
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.
Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters
The following settings appear on the blue screen.
To view the settings, click on this link.
http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspxCAUSE
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I have an emachines W3644... it came originally with windows xp family, but I currently have windows xp pro installed. It worked great for 4 months, no problems or anything. I got it sitting speakers... speakers were not connected or hung. I don't know if this could hit anything or not? My computer has 1.37 GB of RAM and the graphics card is a NVIDIA GeForce 6100 nForce 405.
Questions are... Well, he keeps just randomly bluescreening. There isn't really a reason as that why, I'm the only person using this desktop computer, and I really did something to do that. I have scanned with many different scanners, and they found simple things like false positives and tracking cookies, none of which is a big deal.
I tried many things to fix this myself... but nothing has worked. I'm starting to wonder if it's something to do with the material?
I tried many things... include system restore, using the last known settings who worked, and also something to do with the domain controllers, or whatever.
No one has solved the problem. He continues to randomly bluescreen. Also, a few times I clicked on records and he told me that they were corrupt, and when I right click on them and click Properties, it says that this folder contains 0 bytes of data... when there is more than 1 GB of stuff in there. This is the folder where I put my icons of computer maintenance and other things in.
Then I'll reboot it'll randomly blue screen while windows is loading, he'll also do to the logon screen and sometimes even after connection... sometimes I it will load everything very well and it'll be on the desktop and I will leave the room and return, and it will be on the blue screen.
I'm not sure what to do at this point. I reinstalled windows... and he still bluescreens. I copied most of the error codes he gave me... If someone could tell me please what they mean, or be of any help that would be great. I tried a lot of things... even reinstall... and he still continues to bluescreen. I also unplugged then replugged... all that does not work either. I also tried in safe mode, even in safe mode it bluescreens, sometimes even during loading safe mode.
Anyway... Let me just enumerate all the error messages I've written... Please look at and if you know what NONE of them speaks, please let me know. I just want to know what his question is... so I can hopefully do this fix, or at least get another or something.
Here are the error codes I wrote last week.
STOP: 0X0000008E (0XC0000005, 0 X 00000322, AA4D7C68, 0X00000000)
It mentions something about my bios if I remember correctly...
STOP: 0X0000008E (0 x 0000005, 0XC0000005, 0XBF8A58CB, 0XA84EE96C, 0x00000000) win32k.sys-address BF8A58CB base at BF800000, DateStamp 4a8564c7
STOP: 0X0000008E (0 X 80000004, 0X8165CE81, 0XAF311B38, 0X00000000)
STOP: 0X0000008E (0XC0000005, 0X805656DE, 0XB7AC9770, 0X00000000)
BAD_POOL_Header STOP: 0 x 00000019 (0x00000020, 0XE210A998, 0XE210AA38, 0X0C14020D)
DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1 (0X0001000C, 0 x 0, 00000002 00000000, 0X8A2D2700) wmaud.sys - address 8A2D2700 base at 8A2D2000, DateStamp 48025c3e
STOP 0X0000008E (0XC0000005, 0X80564BB5, 0XA90F0C80, 0X00000000)
PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0 X 80898298, 0X00000000, 0X00000001, 0X8054BBB4)
The BIOS in this system is not fully compliant ACPI STOP: 0X000000A5 (0 x 00000011, 0 X 00000007, 0XF771F180, 0 X 03000000)
PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0XBC99E00C, 0X00000002, 0X00000001, 0XAC9A203C)
STOP: 0X0000007E (0XC0000005, 0 X 00002300, 0XB85E29F4, 0XB85E26F0)
STOP: 0X0000008E (0XC0000005, 0X805454F3, 0XB9359B5C, 0X00000000)
It's all the ones I copied. I tried to reinstall and still get errors. Please, someone tell me what these codes mean as soon as POSSIBLE.
Thank you.
If the RAM is only four months and you have identified that it is at the origin of the problems (e.g. the BSOD happen when only a single module of RAM is in) and then even after four months it can always happen. Things such as ESD (Electro Static Discharge) or plug the RAM while it is still on the motherboard can cause these problems to happen... but they may or may not happen immediately. The RAM could be faulty from the beginning, but has only gotten worse. But unfortunately there is nothing that can make it work, if it is faulty, then it has to go back for a refund/replacement - as boring (and believe me, I know) that it is.
0X000000BE normally concerns pilots in regards to the 0 x 00000050 - this normally either bad RAM, video memory, and bad devices (although not very likely) or bad memory Cache L2 (did not have a lot of people), but it can also be bad device driver software.
I wish that the BSOD errors are actually more accurate as to describe what is at the root of the problem but they are not, and most of the time, it is by a process of elimination that we can solve the problems. However, I would say that if your original RAM works in the machine and you get only BSOD when the new RAM is in, then the new RAM is the culprit.
Here's a little info on the RAM and it does: http://www.technologybasics.co.uk/WhatIsRAMAndWhatDoesItDo.html
I hope I covered everything, but other questions, do not hesitate to ask :)
--> I hope this helps! Please mark it as correct answer or vote if it does :)<>
http://www.pcuk.biz - my Web site | http://www.systems-and-solutions.co.uk - where I work
Info from Microsoft about phishing . Information from Microsoft on the fake security software
Maybe you are looking for
-
Why make two copies of sent messages in the 'Sent' folder and I can change it to one?
I automatically get two copies of every message I send in my "Sent" folder and I obviously wish I simply get a.
-
Firefox Home will allow Flash Player content on my iPad 2?
Apple and Adobe are not friends and, as a result, Safari does not allow downloading another browser; IE: Firefox which has Flash Player required by much of the media content. Can Firefox with Flash Player on the sly slip on Apple?
-
App Gmail and mail on laptop. OS Capitan. Difficult to remove email trash permanently, not archive.
Remove the trash, not archives. Any help is welcome.
-
HP LaserJet Pro M225dw MFP: HP LaserJet Pro M225dw MFP scan file format
Hello. I just bought HP LaserJet MFP M225dw Pro. Then I learned that it scans the file to only PDF, JPEG, and PNG. But I need to scan in "TIFF" files very often. Is there a solution to my very important problem?
-
Get the error message on Windows XP dwshk36.ocx
Original title: dwshk36.ocx I get error message dwshk36.ocx. Help!