After the restoration of XP Pro (to an old restore point) could not load sp2 or sp3

Similar Questions

• Windows xp. I restored my computer and after the restoration, it would not load the updates of windows.

  I trtied to go in run and ensure that the BITS and the automatic updates service are started maje

  everything he said to do and always attack, no chance

  I downloaded multipoint pack 3 on a stick with updates, but don't know where to go t oinstall it in xp

  Ttout help would be appreciated bed

  Have you downloaded SP3 from here?

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If so, to install all what you have to do is double-click on the .exe file.

  FYI

  1. How to obtain the latest Windows XP service pack
     http://support.Microsoft.com/kb/322389

  2. Release notes for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/936929

  3. The space of hard disk required for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/947311

  4. Steps to take before you install Windows XP Service Pack 3
     http://support.Microsoft.com/kb/950717

• Restore point could not be created

  I tried to create a Point of restoration, but in vain.

  Error measage: Restore Point could not be created for the following reason: access denied (0x80070005).

  I am logged on as administrator, why I can not create a restore point?

  Hello Paul0246,

  Thanks for posting your question on the Microsoft answers Forum.

  We will try to the simple troubleshooting step: turn off System Restore, then turn it back on. This will delete all existing restore points.

  How to disable the system restore in Windows Vista:
  http://bertk.MVPs.org/html/disablesrv.html

  Don't set system restore to monitor other than readers that what is installed on Windows.

  Have you tried to add your account to the list of permissions for the directory of system restore, etc. If this does not work, then try to disable user account control and see if that is the question.
  To disable UAC

  1. Click Startand then click Control Panel. In Control Panel, click user accounts.

  2. In the user accounts window, click user accounts.

  3. In the user accounts tasks window, click turn on UAC enabled or disabled.

  4. If UAC is currently configured in Admin Approval Mode, the user account control message appears. Click continue.

  5. Clear the check box use User Account Control (UAC) to help protect your computer , and then click OK.

  6. Click restart now to apply the changes immediately, or click restart later and close the user accounts tasks window.

  If disable UAC does not help with the creation of a system restore point, try the following:

  (1) put in place a start-up in minimal mode and see if a 3rd party program or software may interfere with the system restore point.
  Follow the article below for instructions on the msconfig configuration (clean boot).
  KB 929135 - how to solve a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  (2) turn off the anti-virus and try to create a system restore point. I would also try to uninstall too.

  Please reply back and let us know if any of these steps has contributed to your question or if you still need help.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• I need to create a point of restore system from a specific date. What I "undo" all the restore points that took place after the restore point I want?

  I allowed someone to use my computer.  I signed as an administrator and didn't know.  I get errors galore.  My Event Viewer is filled with errors, administrative cautions and even a crucial questions.  I have to take my system will cost about a week.  The person ran system restore a change has been made every time.  So I can no longer choose the date that I need.  Could you be it someone please let me know if the task is possible.  Or do I have to go through my whole system cleaning!  I HOPE!

  Thank you!!!

  I allowed someone to use my computer.  I signed as an administrator and didn't know.  I get errors galore.  My Event Viewer is filled with errors, administrative cautions and even a crucial questions.  I have to take my system will cost about a week.  The person ran system restore a change has been made every time.  So I can no longer choose the date that I need.  Could you be it someone please let me know if the task is possible.  Or do I have to go through my whole system cleaning!  I HOPE!

  Thank you!!!

  Hey 'Vista' - leeChallenged

   
  the only system restore point that you create is for today
  You cannot create a restore point for yesterday etc.
  they are either made or they are not made
  go back two or theee weeks to system restore to before he was hit if the dates of restoration are available

  read the information in the link to a very good display of how return more than 5 days in the System Restore Points by checking the box below.

  http://www.windowsvistauserguide.com/system_restore.htm Walter, the time zone traveller

• Stuck in the temporary user after the restore point - no access to internet & apps

  On the internet Satellite laptop start access via wireless very slow "busy circle running on the systray wireless icon", and applications would not go - sometimes up to 10 mins at startup before the system moved.

  Application alleged recently installed early internet access before ready system has decided to return to pevious save point.

  After recovering from error messages from windows safe mode 7 from ie4uinit.exe cannot start also several other progs will not start... temp user is now only access the machine... it is to say no or applications... office or outlook...

  wireless network OK... can see local files and folders on the hard drive and the computers on the network

  Although the admin user can't seem to find the old user profile or don't implement the new user... no password used

  How can I return to my old user profile please?

  Mark

  Hi Mark

  As I see that you have started two identical threads in two categories.
  Where do you want to discuss your problem?

• I tried to sync my ipod with my iTunes after the addition of new music, but when I tried it could not synchronize?

  the error is '1156' apparently 'others' files is full and not audio files that I check to see if they took up a lot of memory, but they don't I also dumped more music that I added but still didn't work I also checked the calendar, SMS, apps, and other programmers like that but nothing happened and the 'other' bar still takes most of the capacity on my iTunes when it does not still took half of what my audio did before I tried the sync. Does anyone have any suggestions.

  Hello

  I suggest you to refer to the articles and check if it helps.

  iTunes: synchronization of multimedia content for iPod and iOS devices

  http://support.Apple.com/kb/HT1351

  iTunes: iTunes Store advanced troubleshooting

  http://support.Apple.com/kb/TS3297

  If the problem persists, I suggest you to contact the Apple Support for assistance on this issue.

  Apple Support communities:

  https://discussions.Apple.com/community/iPhone/accessories?view=discussions

  I hope that helps!

• replace the black ink cartridge, but I cannot print anything. Could not load the publication SmartWeb w/o say

  After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.

  Can I get a support phone number to get this problem resolved?

  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• Will system restore remove e-mail accounts created after the date of the restore point?

  Original title: System restore

  Will system restore remove e-mail accounts created after the date of the restore point

  Hello Nick,

  The emails and your gmail account settings would not be affected. But, if you have configured your user account in Windows 8 with the newly created Gmail account, these configurations too after the restore point then only, would be affected not the main account to the Gmail server.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  Thank you

• Error: "no restore points could be created for an unknown reason."

  original title: inoperable. Windows Vista system restore

  My system recovery, restore cannot create any requested restore point after that execution and by completing the order followed with pop - up box describing that no restore point could not be created for some unknown reason.  Help, please!

  Hello

  1. you are making a system image backup or you try to run the system recovery options system restore?

  2 are you try to create a restore point manually?

  3. at what stage you receive the error message?

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Disk space lost after the restoration of Bootcamp - El Capitan

  Hello

  I've created a Partition of Windows 49 GB using Bootcamp and then tried to restore the partition after. To restore the partition that I got a message error "your drive could not be restored to a single partition. Since then, I have "lost" the 49 GB of space.

  I checked the similar thread, but I'm not sure on what to do to fix this. Outputs of suggested controls are as follows:

  

  

  

  

  

  I can see on the screenshot on the bottom the 49GB, but do not know how to release.

  I tried running in Recovery Mode and diskutil repairDisk disk0 disk utility but this has not resolved.

  Any help would be appreciated!

  Thank you

  You will temporarily lose the HD recovery. Please backup OS X.

  1. merge the HD recovery in OS X. The order of the disk slices is essential in the following command.

  diskutil mergePartitions jhfs + "Macintosh HD" disk0s2 disk0s3

  2. in disk utility, expand the new OS X partition to cover the entire disc.

  3. re-install OS x and recover your Recovery HD.

  If you are comfortable with the Terminal commands, then

  1 backup OSX and all of your files - use Time Machine to back up or restore your Mac - Apple Support .

  2. boot into Internet recovery (CMD + Opt + R) - OS X: on OS X Recovery - Apple Support .

  3. click on Utilties-> disk utility and erase your entire internal drive.

  4. restoration of OSX and your files - use Time Machine to back up or restore your Mac - Apple Support .

  This requires another external drive that can accommodate TM backup - backup disks that you can use with Time Machine - Apple Support .

• lost all the restore points after the reinstatement of windows

  Original title: have just re-recorded windows software, now Ifind I lost all the restore points. How can I get the old one back?

  Windows has been registered online. Checked restore points after recording and found that the only listed restore point was created when the software has been registered. How can I find the previous restore points?

  If you reformatted and reinstalled windows, you will lose any restore points. Theyre gone

• Windows complete PC Backup Image - impossible to restore the backup on my laptop after the restoration of the C drive.

  My user profile is not loaded correctly, and so Sony told me to do a restore of the C drive which took my drive C back to factory settings and lost all my programs and files.  I tried since then to restore the Windows Image backup I did on my external hard drive.

  I open backup and Restore Center, click Advanced Restore, click Advanced Restore again.  The box application to what you want to restore?  The only option is to files from a backup made on a different computer.  I click Next, and he said: select the location of the backup to restore.  Hard drive, cd or dvd option has already found new Volume (e), which is my external hard drive.

  I click Next again, and he says, select dates to restore from.  The only option in the box is dated 2008-01-12 14:14:34 backup location is not available.  My external hard drive has multiple backups on it, including the Windows Backup Image (which was the first backup, I did and it contains 152 GB), and so I do not understand this.

  I continue, and then click Next.  It now says select files and folders to be restored, but there is nothing in the box.  I have check the restore everything in this backup box and click Next.  I save the files restored to the following location - check and navigate to the C drive.  I also check both boxes: restore files to their original subfolders and create a subfolder for the drive letter.  I click on begin to restore, and then he said:

  Restoration was unsuccessful.  Error: the parameter is incorrect. (0 x 80070057)

  I'm desperate to be able to get my programs and files back on my laptop.  I don't understand why the restore function can not see my Windows Backup Image, and why this is so difficult.  I've read other complaints by users about this, but cannot find a solution.

  I look forward to hear from you.

  Thank you.

  Hi HGHFaith,

  I suggest you try the following steps:

  Step 1 : Clean boot the computer and then try to restore

   

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Run Check disk to repair bad sectors on the hard drive.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. type E: (external drive) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check whether the problem is resolved

  For more information, see the link below

  Restore your computer from a system image backup

  HTT://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.