After the start, after the windows logo goes

Similar Questions

• The gel at the Windows logo goes to black screen HELP!

  Hello

  First when I turn on my laptop I have SMART disk error. I have been informed that the hard drive needs to be replaced, but I have also another problem is when I press on enter to continue to start. My computer freezes s to the Windows for a good few minutes, then I get a black screen and the cap lock light flashes 4 times.

  Can someone help me?

  HP Pavilion DV6-3040sa

  Windows 7 64 bit

  Before that happened, my laptop has been extremely slow and unresponsive this is why I decided to do a clean install of the operating system. My laptop was still slow and be insensitive. I have the installation could of thought was wrong somewhere so I reinstalled the operating system again, but the same problem. I installed some updates and Service pack 1. Restarted my laptop and then receive the SMART drive problem.

  Thank you

  Kin

  Replacing the hard drive means a re-installation of the operating system.  Resettlement reign essentially all software issues that may have accompanied the failure of your hard drive.  So the answer is Yes it should solve the problem.

  If you don't have recovery media please contact HP using the information provided above.  I suggest you contact instead of trying to create your own media.  As this will probably be very difficult and problematic on a failing hard drive.

• Why pc does not start, and the windows logo hangs after installing the update?

  often, I can't start my computer after installing updates. I push the button the windows logo hangs and windows did not start so I manually press the button close. After I press the button again the Startup Repair tool appears so I can get the windows works normally. but happening permanently since buying the laptop 2 years ago, but not after every updates. It happens randomly.

  Hello

  Method 1:

  I suggest you to use the Windows Vista disc to perform a Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2:

  If the method above does not help then you can check the link below and check the troubleshooting steps to resolve the problem.

  http://support.Microsoft.com/kb/934540

• Failed to start after the windows logo screen, please help.

  Original title: STARTUP DO NOT FULLY

  Hi, I run windows XP Home Edition on my laptop, when I switch it on it boots until the windows logo and no more, can anyone help please.

  I tried F11 to safemode etc but is still no more than the windows logo.

  You must be repeatedly tapping / pressing the F8 key before Windows starts to load to access the Advanced Boot Options menu to see the Safe Mode options :)  Keep and tapped F8 until you see the Advanced Boot Options menu.

  If you miss the niche F8 and XP starts to load, you missed it, and you have to start over.

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• Windows startup at black screen after the Windows logo

  Original title: Evga Nvidia GeForce GT 520 1GB black screen graphics card

  I have a Hp Pavilion 6400 in the series which ran on Windows Vista (32 bit). I recently installed Windows 7 Ultimate (32 bit) and now the screen goes black once the windows logo closed its animation. I uninstalled the driver, re the driver installed and configured my system to the lowest resolution.

  Already found in the forums.
  -TV is too old to be compatible.
  EVGA - technician told me that the food was not powerful enough.
  -Forum Windows says: error in Explorer.exe.
  -Also found response that runs the computer through MSconfig would solve the problem.
  So far, none of these solutions have worked. Answers appreciated.

  Problem solved.

  It turns out, the driver for the video card would never completely install due to its mode of operation.
  Solution.
  1 restart Windows "low resolution".
  2. access to the form of previously downloaded files driver install the EVGA site while in safe mode.
  3. once divers have installed I changed the resolution in a HD rather than a framework
  "(native)" parameter in the resolution section.
  4. application of the Windows updates.
  5A started playing Star Trek Online.
  Thanks for your reply and have a great week.

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.

  Re-installing Dell inspiron 19 has windows 7

  People,

  I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc.  Then I created a partition and marked as "bootable".

  When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.  A few pixels logo show and then it's there.  Any ideas?  I worked on it for several days.  Really a "stumper" for me and I did something like that for years!

  Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer.  After working on this for a while, I decided to just do again it.

  Miles

  Located in the beautiful valley of the Shenandoah in Virginia

  Hello

  Here's how to use the Dell Windows 7 disc according to Dell:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_362048&isLegacy=true

  If you have problems with it, try to Support Dell because it's their software:

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Or try the Dell Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  And these are some Vista Forums you are in.

  In Forum Windows 7 install:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• Laptop hung on the windows logo

  HpPavilion-g6-1394sa

  Freezes on the windows logo during boot (windows 7).

  Crashes when starting safe mode.

  Crashes when you try to go into recovery tools.

  Help please.

  Hello

  303 error code is a Smart failure for the tough and would indicate that it should be replaced.  This is also consistent with the startup problem you describe in your initial post.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United Kingdom, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• My computer displays the windows logo, but fails before I can log on, it keeps looping to the admin. password. by pressing the F8 key disables the system.

  turn on computer

  request password to connect

  Enter the password

  Displays the windows logo

  loops back to enter the password to connect

  If I press F8 repitedly monitor goes blanck (upper left) SYSTEM DISABLED

  You can get as an administrator (you know, fake out)?  If so, you can check in Applications under all users of Docs & settings for a kind of beginning of the app that is a failure; worst case, you can at least create a new user from there...

• Windows does not pass the Windows logo screen at startup

  Original title: computer Dell does not start

  Now, he gets to the Windows logo screen and will not get any further. I tried to repair windows startup and restore among other things. Previously, he was to reach the blue screen and would occasionally work by me it turn off and try again.

  Restart your computer and hit F8 repeatedly (once a second should be enough) until you see the menu Advanced Startup Options. Select repair your computer (if this option does not appear you have to start from the Windows recovery disc or the installation disc).
  Then select System Recovery Options and run the Startup Repair tool.
  http://bit.LY/9rV2SB

• My NVIDIA drivers causing windows 7 64-bit ultimate freeze on the windows logo

  My computer takes over until the windows logo starts to blink before the transition to the screen of the user chose and then just abdou.  I tried runing the difficulty of starting and it came as unable to repair, I tried to restore to the most recent restore point and had the same problem.  Has no problem starting in safe mode.

  I thought I had fixed, removed the display drivers and it boots perfectly
  Then I tried install the new NVIDIA driver and he got as much as the black screen with the mouse pointer, then screen off because no signal (not edge of speakers either)
  I tried NVIDIA Beta drivers and same problem
  Tried to leave the car computer to install the drivers and rebooted and got it works well, played Diablo 3 for 3 hours, left computer sitting there in the form of the characters (and so do nothing) is back and it has been turned off
  Problem of windows back logo on and freezing at the back, tried to install the beta drivers and got the same thing
  Boots fine in safe mode
  Boots fine when removing the drivers
  I tried all of the NVIDIA drivers I've had since March and it is beta (which is what I was running) for the current drivers and today
  I would have posted this to NVIDA but it forums are down
  It worked perfectly until yesterday
  I run a GTX 460

  Try the driver Nvidia 296.10. I have a GTX 460 SC and that this driver is stable.

• My pavillion g6 will get not passed the windows logo.

  When I start the laptop, it loads up the windows logo, and then freezes. only one or twice because he did this was he actually got past the connection but still slow rest, as if it were frozen. Once on the windows logo I can't do anything with the laptop. the only things I can do is turn off by holding down the power button or out of the charger and let it die. If someone knows something please help.

  Hello

  303 error code is a disk failure short self-test and would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - includes the complete model number and Nr of your notebook series g6 (from under your laptop service tag) - see here for an explanation.

  Kind regards

  DP - K

• How to solve a problem installation software re. the Windows logo test

  I tried to install the sorftware for a new kodak printer and display a window pop up that tells me that the software did not test the windows logo and think I may need a device driver installed. Continue installation can compromise my operating system! I contacted kodak twice to try to resolve the problem, but they were not able to help. Any ideas?

  Hello

  ·         What operating system is installed on your computer?

  ·         Did you do changes on the computer before the show?

  You can run the Microsoft Fixit next article and check.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.