After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started
iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
Tags: iTunes
Similar Questions
-
I got the error message "Spooler subsystem app stopped working and was closed".
I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file. I can not load a printer now. What is the next step?
Hello
You should probably check with Support from Adobe and their communities and Forums in case
There are known problems.Adobe - Support
http://www.Adobe.com/support/Adobe - communities
http://www.Adobe.com/communities/Adobe - Forums
http://forums.Adobe.com/index.jspa====================================
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I'm having a problem at the opening of the pdf document. I get the error message: "Adobe Reader has stopped working" then I get Windows to search online for a solution, but then my document is closed. I tried to uninstall and reinstall Adobe Reader XI, restarted my computer, but it did not help. I get the same message. What should do?
Can you open Reader by itself? If so, check that disable the Protected Mode improves the situation [Edit |] Preferences | (Improved) security].
-
Continue to receive the Error Message: "SystemK Module has stopped working".
Update Google Earth yesterday. Since then, received message: "SystemK Module has stopped working". Any ideas on how to get rid of this message? Thank you, Janet
I solved the problem myself. He returned to an update to Google Earth. Another search engine has been installed (I tried to abort)... that's what has caused this problem. Once I deleted all the files from search engines and (Yes, yet another program associate (!), the problem solved).
Thank you.
-
Get the Error message host application has stopped working
What is a catalyst control center? I get a warning saying that my catalyst control centre: host application has stopped working. is it important, and should I re - download? If so where what to do?
Hello
The ATI Catalyst Control Center is a control application of 3D acceleration that allows you to control features of your graphics card. ATI Catalyst Control Center can be used to fine-tune your graphics settings, enable or disable connected display devices, and change the orientation of your desktop, etc. Many features show you a preview of your changes before applying them.
You can download from following link catalyst control center and check if the problem is solved or not.
http://support.AMD.com/us/pages/AMDSupportHub.aspx
Hope that helps.
-
What is this calculation of parameters of the analysis executable average reliability has stopped working and was closed
Hi Mary,
· You did any computer change?
· When we get this message?
Follow the steps mentioned below:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: when you have completed troubleshooting by clean boot follow steps 7 to place the computer in his usual wayStart your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If none of the options work perform the system restore
What is system restore?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Reply back with the results
-
Original title: Flash Player 11.5
I use Firefox as my operating system. I have updated Flash Player to 11.5 but it kept crashing so I uninstalled and went back to version 10.5. Since then every time I get a Web site that uses flash Player my posts computer 11.5 has stopped working and it is close and looking for a solution to the problem. These message windows continue to flow upward and I can't close them and it prevent my computer answering commands.
I don't understand that I do not even have the software on my computer no more.
Can someone please?Download and use the program to uninstall Flash Player from Adobe, it should get rid of the last vestage of 11.5
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
J W Stuart: http://www.pagestart.com
-
Microsoft network inspection system has stopped working and closes. What this means, and is there a solution?
original title: NIS has stopped workingHi Travispersons,
You can read the following article and see if it helps.
Install the latest Microsoft Security Essentials definition updates
Hope this information is useful.
-
Whenever I run windows update, and try to install an update for Vista, I get the error message"
"Windows Modules Installer has stopped working and was closed"
. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.
Thank you
Luke
Hi guys
I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.
Thank you
Luke
-
Disk load and got the habit successfully installed. Click the icon to open and get the program has stopped working. Removed and reinstalled, but get the same results.
Hi Nerraw,
If you are able to access the program from another user, then your user account is damaged. You must follow the steps in the following article to resolve the corrupted user account.
-
Windows 7 my the media game is slow and still the error who say it has stopped working
Original title: help me please
my set of media is slow and still has the error who say that it has stopped working
Hello
1. What is the accurate and complete error message you get?
2. don't you make changes to the computer before the show?Method 1
I suggest you to perform the following troubleshooters.Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-TroubleshooterOpen the troubleshooter in the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-TroubleshooterMethod 2
If the problem persists, disable and enable Windows Media Player
Step 1: disable Windows Media Player
a. Click Start, type optional features and press ENTER.
b. in the list of objects, expand multimedia functions.
c. uncheck Windows Media Player and click ok.
d. restart the computer so that the changes take effect.
Step 2: allow Windows Media Player
a. Click Start, type optional features and press ENTER.
b. in the list of objects, expand multimedia functions.
c. place a check on Windows Media Player, and then click ok.
d. restart the computer so that the changes take effect.
e. check if the problem persists. -
I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.
'
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
Description:
Stopped workingSignature of the problem:
Problem event name: CLR20r3
Signature of the problem 01: printerselect.exe
Signature of the problem 02: 1.0.2453.22313
Signature of the problem 03: 450fe152
Signature of the problem 04: mscorlib
Signature of the problem 05: 2.0.0.0
Signature of the 06 problem: 4a7cd8f7
Signature of the problem 07: e4
Signature of the 08:10 problem
Signature of the problem 09: System.Security.Security
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message. Any help would be appreciated.
Hi dtwes,
try to stop the program from running at startup:
Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
deselect 'printerselect.exe '.I hope this helps.
-
Someone has an answer to the above error message?
Can you open Reader by itself? If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
-
How to fix the error "Adobe Photoshop CS5 has stopped working"?
I click it and it loads the page with credit, but an error pops up right after that gets done. How should I do?
Hi DakotaMerrival
1. what operating system is installed on the computer?
2. for how long have you been faced with this problem?
3. did you sons of recent change the computer?
4. have you tried to reinstall the program?Do check and provide us with the information about the installed operating system-
Method 1:You can also view the article provided below and the support link and check if the steps to help you resolve the issue.
http://kb2.Adobe.com/CPS/408/kb408849.htmlMethod 2:
You can check if you face the same problem of access to adobe application in a clean boot state. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
Method 3:
If the problem persists, I suggest you to contact adobe for assistance on the question support. You can check the links below for assistance-
http://forums.Adobe.com/index.jspa
I hope this helps.
Maybe you are looking for
-
What happened to the insertion function. It was on the same line as file
What happened to the insertion function? It was on the same line as the files, tools, etc. He's gone. If you want to insert a jpg you sent as an attachment. I have read through the help files and that you can't find the answer. I want my old Thunderb
-
Mac Mini (El Capitan) play region 2 DVD?
I would buy the version 2 of the region of Attenborough, "life on Earth." Then my Mac Mini El Capitan race play these DVDs?
-
NB550D - sleep utility for Win 7 does not work
Hello I have the following problem: I have installed on my netbook NB550D Win 7.I downloaded the driver from the Toshiba website for sleep Utility, it does not work.He said: can not find material information. Hope you can help me.
-
What is my Satellite A205-s4707 capable of top ranked to windows xp?
-
HP Compaq 8100 Elite CMT: Updated memory 8100 Elite CMT with 2x4gb TwinMos 512 x 8
Hello. I'm new here. Of after the plug technical QuickSpecs, I recently bought 2 x 4 GB of "TwinMos PC3 10600 4 GB DDR3 1333 Mhz CL9 U-DIMM ' memory. The chip configuration is 512 x 8 single sided. When I put the memory inside, my PC will boot only u