After the upgrade from Vista Home Premium to Windows 7, I can't connect to my router (Netgear WNDR3300)

Similar Questions

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've upgraded from vista home premium to windows 7 Professional and had to do a custom installation

  I've upgraded from vista home premium to windows 7 Professional and had to do an installation custom and lost all my Hp software, HP Advisior, PC doctor among others. Is there a way to get them without reinstalling everything again

  Here are the specifications of your HP Pavilion Media Center m8120n desktop. According to specifications, your computer comes with the following software factory installed;

  Windows Vista Home Premium (32 bit)

  Roxio Creator Basic 9

  Roxio MyDVD 9 Basic

  (Not available in Canada French) Rhapsody

  Real Player

  My HP Games (not available in French Canada)

  Adobe Reader

  Microsoft Works 8

  Microsoft Office Home and Student 2007 trial edition

  HP Photosmart Essential 2

  muvee autoProducer 6

  Norton Internet Security 2007 (60-day security update subscription)

  HP Hardware Diagnostic tools

  If you don't create HP recovery discs for your m8120n, you can buy a set of ComputerSurgeons.com for $27. You will find the software included in the HP disc #1 folder.

• Not to say could not upgrade from Vista Home Premium to Windows 7 Professional

  I pre-ordered Windows 7 months with no indication that I couldn't switch from Vista Home Premium to Windows 7 Professional without performing a new installation.  Now I learn that I have to re - install all THE programs, once I have perform this upgrade / 'clean install '.  All the criticism of Windows Vista pales in comparison to my irritation at says this news AFTER the purchase, and not before.  Failure of the installation of the Windows 7 Upgrade Advisor to note any problem.  All previous Windows upgrades went flawless.  Needless to say I am extremely disappointed by this turn events and we hope that Microsoft will improve its pre-purchase counseling in the future.

  I guess I have no choice now but to do a clean install of Windows 7 and then reinstall on my computer that will put me out of use for a long period of time?  I backed up the entire hard drive before trying to install, but I doubt I can get by simply restoring this backup.  Is this correct?

  Hi pwcushman,

  Thank you for visiting Microsoft Answers.

  Windows Live OneCare Backup works in stages. You start by setting up how you want Backup to run and save the configuration. The backup will then run according to schedule and backup your files according to the saved configuration. You can make changes to this list or add other files and folders.

  You can restore all files and folders, but you will have to reinstall all the programs.

  Check this link for more information:

  http://OneCare.live.com/standard/en-us/prodinfo/backuprestoredetails.htm

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the upgrade to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit), I can see my second hard drive in the Device Manager, but I am not able to access it in the Explorer... How can I fix it?

  How can I access my hardrive second in windows Explorer after I have updated to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit)?

  Go to disk management and assign a drive letter to the drive.

• Upgrade from Vista Home Premium to Windows 7 Ultimate

  I have a Dell Studio 64 bit machine with Vista Home Premium installed.  My new employer gave me their Windows 7 Ultimate corporate software to install.  I checked with the Compatibility Wizard and it says I can upgrade from Vista Premium to 7 Ultimate but when I try I get the error message saying that I can't.  What gives?  Help!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Upgrade from Vista Home Premium to Windows 7 Professional and I have a few questions?

  I'm about to upgrade to Windows Vista 32-bit to Windows 7 64 bit, but I'm very nervous (stupid - I know).  Currently I have Vista on a SATA internal hard drive, but is planning to install Windows 7 on my much bigger and 2nd inside SATA hard drive, which currently has no importance to this subject?

  1. Is it possible to install Windows 7 on an internal hard drive with Vista on another?  I have no intention to use Vista more so once Windows 7 installed will not need to keep if it is possible to do.
  2. Assuming that I can install Windows 7 on disk more while Vista is a smaller, I cause operational problems by removing Vista once Windows 7 has been wing not unhooked?
  3. Assuming the above is possible I will be able to "faithfully" copy/move/import (not sure of the method - help please) users existing file structure and data from the old files of user profiles of Vista on the smaller disk to the new files in user profiles Windows 7 on disk more nothing lose or create compatibility problems?
  4. If not, should I just stick with the installation of Windows 7 over Vista and use the larger 2nd disk to store users.  I chose this option will data being stored on the disc more to maintain its security between users.  That is, if Winodws 7 is intalled on the smaller C drive and I connect like me, can I keep my data of user on the 2nd drive internal more all ensuring that other users cannot access the data just by accessing the 2nd disc via "my computer"? I hope that makes sense!
  5. It is even possible to store data of the user safely on another drive to the operating system, but still maintain user security principals / separate secure?
  6. It is possible to install Windows 7 on the 2nd largest drive I can (before deleting Vista) user folders simply drag - move in new files of the user, I create in Windows 7 or is it more complicated than that.  (I'll try to find the simplest method to keep user files structures and existing Vista and import/copy/move data in new user profiles in the new operating system).

  Sorry for all the questions but the family counts on me to get it right.

  Show stopper, is that you can do a upgrade in place of a 32 bit OS (Vista in your case) to a 64-bit (Windows 7 64 bit) OS, you must perform an installation "Custom"and clean. "

  This means that you should backup your media files data external 9to) before starting and reinstall all of your applications after installing Windows 7 64 bit.

  Question: Did you buy an "Upgrade" version or the "full version" of Windows 7?

  Regarding the drive to use, either will work, but the procedure is different.

  J W Stuart: http://www.pagestart.com

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I upgrade Edition Vista Home premium to windows 7 using vista anytime upgrade for free?

  anytime upgrade is included with the purchase of windows vista

  can I upgrade Edition Vista Home premium to windows 7 using vista anytime upgrade for free?

  Lol you cannot use Anytime Upgrade upgrading Vista to Windows 7.   The Vista program to THE was the upgrade of a Vista edition to a higher edition of Vista only.  The Vista program to THE ended when Vista was removed from retail sales.  It has never been free.

  THE present program is to upgrade an edition of Windows 7 to a superior and is only available to current users of Windows 7.

  If you want to upgrade Vista to Windows 7, you must purchase a standard upgrade of Windows 7 at retail price.  Please see

  http://www.microsoftstore.com/store/msstore/list/parentCategoryID.44066700/CategoryID.50726100

• Upgrade of Vista Home Premium to Windows 7 Ultimate

  Can I switch from Vista Home Premium to Windows 7 Ultimate 32 bit?

  Upgrade paths:
  When important changes to your computer, for example an upgrade, it is always recommended that you back up your system before installing a new version of Windows. In your case, you can upgrade to Windows 7 depending on the edition and the architecture of Windows Vista, you have installed. If you are running a 32-bit version of Vista and upgrade to a 64-bit (Windows 7 edition) version, you'll have a pure make install, it is the opposite case.

  If you are using Windows Vista Home Basic or Premium consumer editions, you can only upgrade to Windows 7 Home Premium or Ultimate. In addition, you can make downgrades, which means, if you are running Windows Vista Ultimate Edition now, you cannot downgrade to Windows 7 Home Premium. You perform logical upgrades:

  Windows Vista Home Basic > Windows 7 Home Basic, Premium or Ultimate
  Windows Vista Edition Home Premium > Windows 7 Home Premium or Ultimate
  Windows Vista Business > Windows 7 Professional, enterprise or ultimate edition
  Windows Vista Business > Windows 7 Enterprise
  Windows Vista Ultimate > Windows 7 Ultimate.

  Also run the Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  This will check your system for compatibility issues before making the upgrade so that you can resolve.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• It keeps rejecting my product key! (upgrade from Vista home premium 32 bit to Windows 7 64-bit).

  Thus, as the title past Windows is not accepting my new Windows 7 product key. I bought the product key and copy (at the same time of course) of my college, as I am a computer SCIENCE student is trying to catch up. Anyway, if I get home and install my new Windows 7 SP1 (whatever that means) through "BIOS" because I've been upgraded to Vista Home premium 32-bit. When he asked my product key during the installation/installation that it wasn't working, I thought although it may need some updates or something. So I click on ignore and continue the installation. Then after all updates etc... I then try again the product key, and of course it does not work as most of the new technologies in this House works the first time. Please help, it's that some of become a nuisance. Thanks for reading :)

  Make sure you have all the numbers and the correct letter (example: number 8 and letter B can almost look the same.) The letter Q may resemble a 0 or O)

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• No inplace upgrade from vista home premium to pro 7.

  Why don't you support an upgrade to windows 7 pro to windows vista home premium on-site?  I bought a download from Microsoft.com upgrade only to find out that I can't use it.

  Hello

  This isn't Microsoft to answer your question about the unsupported upgrade paths.

  We are for the most part, the volumteers each other here.

  Read this Information in the link provided by TrekDozer.

  You will need to do a clean install with Windows 7 upgrade:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/upgrade-Vista-Home-Premium-to-Windows-7/6f25a435-22c0-4f1e-954F-b1eff638a009

  See you soon.

• sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

  Hello

  It is an event that I went through:

  (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

  Repair of system files change will take effect after the next reboot.

  (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

  (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

  It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

  Kind regards

  Jdec9

  Hello

  Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

  You can also download the files of cbs to Skydrive.

  Use SkyDrive download collected files and post screen shot/image

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Windows 7 upgrade from Vista Home Premium fails continuously at the end

  I tried to spend 3 times.  I ran the Windows 7 Upgrade advisor, and he said that I can directly switch to the 32-bit version of W7.  I currently have 2 SP installed in Vista Home Premium.

  When I run the upgrade, it goes through all the steps successfully. While in the part near the end of the process data conversion (about 5 hours) the system restarts in W7 and then I got an error message stating that the version is not compatible and it cancels automatically to Vista Home Premium.

  Help, please!

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• permutation of windows 7 options to upgrade to upgrade from vista home premium upgrade?

  I just bought a PC with windows 7 Home premium.

  I would like to upgrade to windows 7 ultimate.
  I already bought an upgrade of the retail series Windows 7 Ultimate from Windows Vista that I've ever used.
  Is it possible to use it to upgrade to win 7 home premium to ultimate?
  I have a copy of Windows vista that is not used. So I guess I could first install vista and then use the upgrade bought at ultimate
  However, I would use an anytime upgrade
  Thank you.
  Stuart

  I just bought a PC with windows 7 Home premium.

  I would like to upgrade to windows 7 ultimate.

  I already bought an upgrade of the retail series Windows 7 Ultimate from Windows Vista that I've ever used.

  Is it possible to use it to upgrade to win 7 home premium to ultimate?

  Yes, you can.

  I have a copy of Windows vista that is not used. So I guess I could first install vista and then use the upgrade bought at ultimate

  However, I would use an anytime upgrade

  Thank you.

  Stuart

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.