After the upgrade to iOS 9.3.4 my iPad air2 is suspended

I recently updated my iPad air2 and it crashes when I try to switch between applications. Also when I drag the screen there is lag

Try to hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

https://support.Apple.com/en-us/HT201252

If the steps above do not help, you may need to test in an Apple store.

Tags: iPad

Similar Questions

  • My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?

    My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?

    I guess it is asking you to CREATE an access code. You can disable it later.

  • Cannot make or receive phone calls after the upgrade to iOS 9.3

    Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

    SOLVED

    Went into settings,

    Cell phone,

    Cellular data options,

    then change the setting to EnableLTE OFF,

    It's for my at & t att, iphone 6 s

    No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

  • Cannot access portfolio after the upgrade to iOS 10

    I haven't seen this pop up on other forums yet, but my iPhone 6 Plus does not double tapping on my lock screen after that I upgraded to iOS 10.

    I went into the settings of the portfolio and Apple pay and made sure that allow access when it is locked is on.  Does anyone else know this?

    I'm having the same problem

  • Cannot make or receive phone calls after the upgrade to iOS 9.2

    Last night, I could make and receive phone calls. This morning I upgraded to iOS 9.1 to 9.2, and now I can't make or receive calls.

    Any call I make - other iPhones, to landlines, whether on my list of Favorites or not - says 'call X... '. "(where X is the name of the contact - X is omitted if I don't dial a contact). After a few seconds, the phone says "Call ended." and I get three quick tones.

    When they call me, it goes to voicemail once they hear 1 or 2 rings. I don't hear anything. The call does not appear in the 'recent' folder, but I received a voice message.

    I don't have to "do not disturb" lit.

    My iPhone is a 4 s, which can be a key because my wife has a 5. She has just upgraded and has no problem with calls. We are both on the Sprint network, using 'Ting' which is a dealer - so our actual provider's Ting. My phone says "Version 9.2 (13 c 75)", carrier "Sprint 23.0" and model MD377LL/A."

    I turned the phone on and off several times, and also to do a reset (now hold both power and home until the apple logo appears). neither helped. I double-clicked the original key and removed the phone application and all other applications, then restarted the phone application, which also helped.

    WiFi works.

    A related issue is to: IOS 9.2 update .

    OK, now it works.

    I think that what I had was specific to my carrier - as well as anyone with this problem likely needs to communicate with their provider!

    For Ting (Sprint), here's what I had to do:

    1. to connect to a Wi - Fi network

    2. dial # 873283 #.

    3. press the call key

    4. press "Start Service Update" and wait a minute or two.

    5. press on "Full Service Update" and wait a minute or two for the phone to reconnect to the Sprint network.

    6. once the upper line shows that Sprint is connected, I could make and receive phone calls.

    Greg

  • Use of data cell after the upgrade to iOS 10.0.2 has increased dramatically

    Hello:

    I noticed a HUGE increase in mobile data usage by my phone (iPhone 6s) after the iOS to 10.0.2 update.    I had not changed anything since before the update.  A few days after my phone iOS update my more than double to 15 days prior to the cell data update!   I went under a GB to 2.2 GB for two days.  I am only allowed 2.5 GB of my company.   Assist of WiFi was interrupted. I am connected to a wifi most of the time, all day at the office and at home in the morning and in the evening.  I haven't changed my phone usage habits nor have I down loaded new applications.   I also did all the stuff reset once I downloaded the update as turning on and off, hold down home and appears on the sides until that little Apple.

    I looked in the cell parameters section and noticed a few things that consume more data:

    Facebook: I had disabled cell Facebook use.   However, there was a large amount of data used. I also, by habit, only check Facebook when I'm at a known wifi spot as the House or the office.   It was less than a MB before and near a GB of data in 2 days.

    YouTube: Idem, had turned off cell phones and only look at the House.

    Maps - never used but the use of data.

    e-mail-HUGE amount of data used.  Normal use for me. in the past, the amount of data has been a MB.  Now it's 65 MG in 2 days,

    Siri - I do not use Siri as in "Hey Siri" or by using voice commands.  I use it from time to time to the voice on texts.

    AccuWeather.  Even.

    It's just as much as the apps that I use, the rest is electronic mail and stuff systems.   I uninstalled nearly all applications except for the few that I need as my ticket train and planning aps and mail want to stop this.   I won't send any imessages anymore.

    Quite an experience of something like that?

    Yes! I have iPhone 6 - after that the update almost all my data is gone for the month! I do not have Wifi Assist on and I only use data when I'm home and can connect to Wifi!

    I see my iPhone to connect to my Wifi then bounce to the cellular network. I have no problem with my home wifi network. This problem also occurs in the work. In addition, the network at work requires the password to the network - I type in iPhone tells me it's the wrong password, and then it connects. Then it disconnects after 2 minutes.

    I tried to reset the Wifi feature. Help!

  • After the upgrade to iOS 9.2, I have no service and my battery drains quickly

    I have an iPhone 6. I live in England.

    I have upgraded to iOS 9.2 two days ago and I saw two problems since:

    1. I can not get any mobile service. I see the 'no. Service' at the top left of the home screen when I try to search for the service. A Wi - fi connection still works fine. I turned my phone off and on again, and while it does not find service briefly, it goes quickly back to 'No Service'. I tried to enter the Mobile Carrier settings area and deactivate the options, turn it back on. Nothing has worked.
    2. My battery drains very quickly. It is 14:12 in the afternoon and I currently have 29% of battery. Usually I didn't have come down below 60% when I get home at 5 pm, because I do not use my phone very strongly. The Gmail application took 35 percent of my independence despite spending only 9 minutes on screen. My phone is hotter that it would normally be.

    I have heard that when a mobile phone search service repeatedly, it uses a lot of battery. This phone has been updated with the airplane Mode + Wi - fi since this morning - I did have this service at any time you are looking for today.

    People have recommended reset my settings, but I don't know what this will do to my phone, so I didn't, as whenever someone suggests it, it does not work for the afflicted person.

    Is there anywhere I can check the reports of bugs with the 9.2 release? I feel like there is a problem with it, but I don't see anything on the internet to suggest that.

    See if this article helps you: If you can not connect to a cellular or cell - data Apple Support Network

  • After the upgrade to IOS 9.3.2 my screen freezes

    After upgrading my 6 + iOS 9.3.2 my screen freezes and does not respond.  Currently running applications continue to run, but I can't interact with them.  If I go back to the phone later, the problem disappeared, but I don't know how long it took.  Then the problem comes back.  Even after a factory reset, with none of the applications running, my screen will freeze.

    scottfromlucas wrote:

    After upgrading my 6 + iOS 9.3.2 my screen freezes and does not respond.  Currently running applications continue to run, but I can't interact with them.  If I go back to the phone later, the problem disappeared, but I don't know how long it took.  Then the problem comes back.  Even after a factory reset, with none of the applications running, my screen will freeze.

    When you say factory reset, did your restore as new or from a backup?

    If restore you to the new and the problem persists, I make an appointment with the genius bar and take your phone to Apple and looked at him.

  • Game Center App has been removed after the upgrade to iOS 10.1

    Hello

    Since I've updated by phone (iPhone 5 s) iOS 10.1 I see no Game Center app in my apps list.

    How can I get it back?

    Thank you

    Hello Srikanth1520,

    Thank you for using communities of Apple Support.

    I see after update your iPhone to iOS 10, you don't see the Game Center app in your app list. I understand, I use Game Center too much and want to help you with this.

    In iOS 10, Game Center as removed from the home screen. You can still access the Game Center profile and let invites players nearby by following this path: settings > Game Center.

    All the best.

  • My 5s iphone battery dies on a call after the upgrade to ios 10

    My iphone battery drains when a call after updating to ios 10? Why this is happening? battery decreases even in navigation... Please give me a solution!

    Try to configure your phone according to these http://www.apple.com/batteries/maximizing-performance/ tips

  • I wonder if I can pass my carrier unlocked iphone 4 iOS to iOS 7 8? or it will lock again after the upgrade?

    I wonder if I can pass my carrier unlocked iphone 4 iOS to iOS 7 8? or it will lock again after the upgrade?

    1 n ° iPhone 4S can only be directly updated to 9.3.3.

    2. update of the iOS on an iPhone that was originally sold as unlocked or is released by the carrier won't it relock.

    (143770)

  • Download the ipa to itunesconnect defective after the upgrade to 2.2.1 MAF (ITMS-90474 ERROR: "Invalid Bundle.) iPad multitasking support requires these guidelines)

    Hello

    Everyone knows about this problem? It all started after the upgrade to 2.2.1 MAF. The application loader complains with the following message:

    ITMS-90474 ERROR: "Invalid Bundle. iPad multitasking support requires these guidelines: "UIInterfaceOrientationPortraitUpsideDown, UIInterfaceOrientationLandscapeLeft, UIInterfaceOrientationPortrait and UIInterfaceOrientationLandscapeRight. Find "UIInterfaceOrientationLandscapeLeft, UIInterfaceOrientationLandscapeRight" in all «...» »

    A quick google search lead me to this link http://stackoverflow.com/questions/32559724/ipad-multitasking-support-requires-these-orientations. I'll try again, but I thought that maybe there is a solution that has the parameters of MAF.

    Kind regards

    Majdi Jaqaman

    Hello.

    I am happy that it has worked for you in the end. The CRG team will probably add an option setting somewhere in a later version of the MAF. They also suggested a more clean approach to deal with the issue than to change the XCode project template.

    First, create a file named plugin.xml and paste the following inside XML. I suggest you create the file in a central location, because it can be referenced by more than one app.

    
    
        maf-plugin-opt-out-multitaskingn
        Opt out of iOS multitasking on iOS 9
        
            
                
            
        
    
    

    Then just register the plugin in the MAF - application.xml. Things should look like this:

    Best regards

    Frédéric.

  • is more able to stream video from some sites after the upgrade to Safari 10

    After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

    Open Safari preferences / Security tab and check the box allow Plug-ins.

    Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

  • After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

    After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

    What do you mean on your laptop more?  Please provide details.

    Best,

    GDG

  • Cannot connect to more than one mail account after the upgrade to Sierra

    I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

    Oddly enough, my Hotmail account seems to be ok.

    How can I fix this without having to re - enter all passwords?

    As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

    After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

    Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

    How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?

Maybe you are looking for

  • ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

    Hello I recently tried to install a 750TI Asus GeForce GTX on my HP Pavilion P6 2010UK using a SATA 6-pin PCI Express power connector, but after starting I get three beeps and a black screen. Can someone help me with this please? As an observation, t

  • Transparent countdowns

    How can I get a transparent countdown in my video (10.1 iMovie)?

  • PID teststand

    I did a sequence in TestStand 4.1.1 (with LabVieW) which contains a PID VI regulation which regulates power at a certain temperature. I was using the Ziegler-Nichols method to come up with the appropriate PID parameters for the system when you use a

  • "Unable to download. Without this interface supported. "

    I bought 4 DVDs on the internet and tried to download but get this message: "unable to download.  Without this interface supported"I can watch the DVD on Quick Time player, but it will not download.  I have Windows Vista 64-bit.

  • The Questions search page

    Hello worldI have a few questions related to a search page.(1) how the buttons in a panel request can be ordered again? I have my Panel query value 'compact' and for some reason, the "Advanced" button comes first. I'd like reorganize so that the butt