After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

These must be run as administrator. If you have only one user account, you are the administrator.

Run the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

The title of the Console window should be all Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ all Messages

in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu at the top of the screen bar.

Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

Please don't dump blindly thousands of lines in the journal in this discussion.

Please do not post screenshots of log messages - text poster.

Some private information, such as your name, may appear in the log. Anonymize before posting.

When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Tags: Mac OS & System Software

Similar Questions

  • According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

    You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

    What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

    Printers and faxes is totally blank?

    Open a command prompt window (start > run > cmd > OK)
    Type the following in the black command prompt window and press enter
    spooler request SC

    You should see something like this:
    Service_Name: Spooler
    TYPE: 110 WIN32_OWN_PROCESS (interactive)
    STATE: 4 RUNNING
    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
    WIN32_EXIT_CODE: 0 (0X0)
    SERVICE_EXIT_CODE: 0 (0X0)
    CHECKPOINT: 0X0
    WAIT_HINT: 0X0

    What is the 'State' displayed for you?

    Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

  • the printer will not print-message ("script error line 2032-resi//ieframe.dill/preview.js)__

    I installed a dell 720 photo printer to my new laptop Acer. It does not print. script line 2032-resi//ieframe.dill/preview.js error message comes up. the printer will not print but shows that its installation - HELP

    http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&catid=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=PRN_INKJET_720&hidos=WW1&hidlang=en&TabIndex=

    Reinstall it using the right Vista 32-bit, if you have Vista 32 bit OS, since the link above of Dell printer drivers.

    See you soon. Mick Murphy - Microsoft partner

  • Why my printer will not scan to my computer, the will says not connected

    My hp officejet 6310 all-in - one will not scan to my computer can someone please advise

    my printer is connected through USB, when I ran the check he told me to uninstall and re install which I did, but still does not work

  • SE error message: there is a carriage jam and the printer will not printusing HP PSC 2355xi printer all in one

    Original title: transport jam

    Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

    It is a hardware problem, not a Windows problem. You should contact HP for assistance.  This may mean that the engine or the running gear is toast. They should be able to tell you which components to check.

    writing in the new message: * e-mail address is removed from the privacy... *

    Despite the opening of the printer and the cart is many, many, many times I still get the error message that there is a carriage jam and the printer does not print. I have a HP PSC 2355xi all-in-one. The carriage moves freely. Help!

  • HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

    Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

    Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

    Hello @azvlr,

    Welcome to the Forums of HP Support!

    I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

    Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

    The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

  • My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

    I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

    Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

    Here are some instructions for uninstalling: uninstalling the printer software.

    You can download the driver here: Driver and software downloads.

  • My setup of the printer will not work and Fire fox shows only blank pages. Help?

    I tried to change the margins on my printer set up. Since I did my printer will only print blank pages of Firefox. (If I open a PDF file it prints well) I tried to go back into all of the printing, but it is only as a large black page. Any thoughts?

    Try of the reset described here:

    http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Want 5540: Blue light blinks and the printer will not connect wireless

    Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

    Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

  • The printer will not allow the default printer

    Adobe will not print file, said printer must be installed
    .  OfficeJet 6500 removed and reinstalled.  When installing the message says "cannot set as default printer".  Fix Microsoft, he says that he cannot solve the problem. Help, please.    Problem is recent.

    Hi Jerry93306,

    1. did you of recent changes on the computer?

    2. When you receive the error message?

    3. are you able to print using applications such as WordPad or Notepad Windows?

    4. what Microsoft fixit tool you have installed on the computer?

    See the link below and try the steps mentioned, if you get the error message when you print from Adobe applications.

    Error "you must install a printer.

    http://kb2.Adobe.com/CPS/409/kb409119.html

  • HP Laser Jet 200 MFP: HP Laser Jet 200 prints wireless, scans of the printer, but not scan to the computer

    I can print wireless from my computer.   I can directly scan from my printer for paper output.   What I can't do is to scan from my computer (IE Word, HP SCAN...) in a document.    I was able to do a few weeks ago and know nothing of this happned to make change.

    Hey @AnnieCTX,

    Welcome to the Forums of HP Support!

    I would like to help you today to solve the problem that you experience when you try to scan wireless since your color HP LaserJet Pro 200 M276nw MFP to your computer Windows 8.1. There are a few different things that can cause conflicts sweeping. There may be one occurring problem of connectivity, software, or between your computer and your printer driver. Therefore, when first troubleshooting I have to run the HP print and scan of the doctor tool. This tool will help us identify the problem and fix this scan. Can I please you follow the steps below.

    Can I have it please click here to download and run the HP print and scan of the doctor tool. This tool will run on your computer and 'set scan' questions for you. If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test scan using the HP scanning software to confirm if the problem is resolved.

    The issue of digitisation should persist, can you please clarify exactly what happens when you try to scan via the HP scanning software (error message, nothing opens, etc.)?

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • My printer will not scan... I get a message to start the search from my computer and I don't know

    When I try to scan to my computer, I get the following message.

    Scanning problem

    Try to start the scan of the computer. Refer to the documentation for more details.

    I don't have any need to.

    Hi Thomajs112748,

    Open the icon on your desktop that looks like the printer, and then click Manage scan of the computer to make sure that this feature is enabled.

  • New router now the printer will not work wireless

    The printer is a HP1102W. Operating system is windows 7. At & t installed a new router is a netgear 7550. I tried several times to get the printer to work wireless but just cannot make it work. Not very food to computers so I could really use some help.

    Thank you

    Hello

    Please follow the instructions below to fix:

    http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

    Kind regards.

  • Hello, the printer will not print attached e. RTF file extension.

    HP Deskjet printer 3070.  Windows 7 operating system.  Error message: insufficient and printed data with error.

    I tried e-print for the first time. When I go to the configuration of web e-printer that I am asked to give a username and a password, I did however the system does not recognize and disconnects me.

    If anyone can help. Thank you

    Hello

    RTF files are not supported by the ePrint service.

    Below you can find the basics of service and restrictions, you can find a support file type listed under

    Frequently asked questions (FAQ) > Can what size and type of files I print using ePrint

    http://support.HP.com/us-en/document/c03721293

    Kind regards

    Shlomi

  • After the draws will not start due to a missing file ("' / users/username/Library/Preferences/Adobe/After Effects/13.0/dummy") what is it?

    Mac OS 10.9.3, latest version AE 2014.

    Start here:

    fix the permissions problem that prevents to start Adobe applications

Maybe you are looking for