After the upgrade to windows 10 my DVD player and second HARD drive is not recognized

Hello.

I upgraded my laptop - Acer Aspire 7552 G - 10 Windows Home and now my DVD player and the second HARD disk is not recognized by the system. In Device Manager, the material is indicated under "Unknown devices" and I tried almost everrything and searched for a solution in-house. Hope that there is someone who has a solution to this.

Key of the Windows logo + x
Click on Device Manager

If the yellow exclamation mark or unknow device is present
Double click on it
Choose the tab "Details".
in the drop-down list, select HardwareIDs
Click the first value and paste here

Tags: Acer Software

Similar Questions

  • After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work.

    After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work. Also several times when I go to the library to develop fashionable mode, programs stops. I am really frustrated. Help, please.

    Also several times when I go to the library to develop fashionable mode, programs stops.

    It is often a symptom of an incompatibility between LR and your video card.  If the other suggestions don't help you, go to System Preferences > performance and uncheck use Graphics Processor.

  • DVD player not recognized after the upgrade to windows 8

    I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

    I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

    The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

    My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

    I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

    OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

    OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

    I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

    Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

  • My laptop camera image on the upside after the upgrade to Windows 7 Professional 64-bit.

    I have a laptop Asus G50Vt - X 1, which is a 64-bit computer. It had Windows Vista Home Premium 64-bit installed on it and the unit worked properly with him. I ran the update of Windows 7 Advisory on this matter and he said I could upgrade to Windows 7 64 bit. After the upgrade to Windows 7 Professional 64 bit the images from the camera are all upside. I contacted Asus about the problem and they sent me the drivers updated, but the images are still upside down. Pourrait Windows 7 cause this problem as I know that it worked fine under Vista?

    I also noticed that my dvd/cd player and external hard drives don't stop the execution after that I have quit an application. When this happens, I can't eject the cd or remove the drive from the computer.

    Windows Update has nothing to do with the upgrade of Windows. Post future questions in one of these forums, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • FN keys do not work after the upgrade to Windows 10

    Why the FN keyboard does not work after upgrade to Windows 10?

    FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

    You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

  • Satellite P855 - function keys do not work after the upgrade to Windows 10

    Function keys do not work after the upgrade to Windows 10
    I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
    Anyone know when and if it will be available?
    Thank you

    I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

  • Problem with a keyboard key of T440 after the upgrade to Windows 10

    Hello world

    I have a Brazilian keyboard layout (ABNT2) on my T440 and I am facing a problem after the upgrade to Windows 10. The new version of Windows recognizes this key:

    As long as the "CTRL on the right" (commom on other layouts).

    Everyone was faced with a similar problem or have any clues as to what might solve this problem?

    Thanks in advance,

    Felipe

    Solved.

    Do more research, I fount out is an old bug with Lenovo's Thinkpad laptops with this Brazilian keyboard.

    If you are facing the same problem, use this registry tweak and the problem is solved:

    http://ZTop.com.br/WP-content/uploads/2009/11/thinkpad_abnt_win7.zip

    (the file name indicates "win7" but it also works for Windows 10)

  • Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

    Hello
    The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
    Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

    Satellite A500 - 134

    Try restarting Flash cards.
    Start > all programs > Toshiba > utilities > restart Flash cards.
    After doing this press FN button several times.

  • Volume controls on the keyboard after the upgrade to Windows 8

    I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

    In the following device manager are listed under keyboards:

    HID keyboard device

    Keyboard 109 MCIR Microsoft eHome

    Keyboard MCIR Microsoft eHome

    Microsoft eHome key remove control Keayboard

    PS/2 standard keyboard

    Any report that they are installed and are working correctly and that the drivers are up to date.

    Has anyone else seen or solved this problem with a Touchsmart computer?

    The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

    Instructions received from HP:

    Please go to the following link and check the "return of the system", article #7 is the USB dongle:

    http://support.HP.com/us-en/document/c03026390

    After you have reinstalled the receiver, please download and install the following driver:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

    Then install the following update:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  • HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

    Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

    Hi @Ron9871,

    Welcome to the Forums of HP Support!

    I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
    • Type the IP address in the browser to bring up the SAP.
    • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    • Select Manual IP.
    • Enter your IP address manual (192.168.0.232)
    • Enter 255.255.255.0 for the subnet mask, except if it is different.
    • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    • Click on apply.

    Please restart the router, the printer and the computer in this sequence.

    If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    You can try to change your WSD printer port by a Standard TCP/IP port.

    To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

     
  • After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

    After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

    1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

    If you have an ATI card, then you're stuck with a proportional image: P

  • HP Pavilion QG833EA #ABH G6: after the upgrade to windows 10 I tride return to windows 7

    HII,

    After the upgrade to windows 10 I tride return to windows 7. Now wen my laptop startsup screen is all black and shows.

    An operating system not found. Try disconnecting all the drivers that do not contain an oparating system.

    I have afriting of tride, but noting help als cant reser of system or bios. I said a test of the system is givs oke!

    How can I reinstall windows?

     
  • Aspire S7 - 392 stop every 30 minutes after the upgrade to Windows 10

    Hello

    My S7-392 stops after 30 minutes (exactly) to be on almost everytime (I normally use it plugged in). This problem became very regular after the upgrade to Windows 10. When I had Windows 8.1 it is happened, but not every day, it is now very regularly (like 90% of the time, he stopped unexpectedly).

    I also have experience in Mode without failure.

    There are no BSOD, no message in the event viewer, except that prior to the shutdown was unexpected. He has not collected from overheating.

    What should I do? This is known issue?

    Yes, there are some hardware or BIOS problem.

  • Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

    My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

    I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.

  • Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

    After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

    It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

    Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

    If you need Atheros bluetooth driver, then this is probably the one you need.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

    Unfortunately, I won't be able to help you with question 12 code or ethernet.

    IMO, they are insoluble.

Maybe you are looking for