After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd
Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.
I think you should contact the manufacturer about this problem with the Bios...
It is usually F2 or delete to enter the Bios / configuration at startup.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Title asks this.
Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?
Thank you.
Title asks this.
Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?
Thank you.
Hello
In Windows 7, the AllUsers folder is not a real file.
It is a symbolic link that redirects to the C:\ProgramData folder.
ProgramData is not hidden, by default.
The correct syntax for the Attrib command would be,
C:\>attrib h ProgramData
You can view all files by going to the tab options\View Organize\Folder and research.
In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.
Click Apply/OK.
Concerning
-
FILE: \BOOT \BCD - formatted status 0xc000000f for latpop error
I formatted the hard drive of my laptop and has been installing windows 7 when it crashed at halfway.
Now when I restart the computer its give the FILE: \BOOT \BCD - status 0xc000000f error.I tried recovery to start by inserting the windows startup disk, but as the system has no any OS, it is not repairable. Tried the disc start recovery and orders bootrec quick functions.Can anyone suggest how I can fix it. Or is it simply because my laptop currently has no OS and thus this error?Test your hard drive for errors. If you have sector errors near the front or at the beginning of the disk, this could be the cause.
Hard drive test - CD Bootable:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticJ W Stuart: http://www.pagestart.com
-
My laptop has Windows Vista and is about 3 years old. It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer. Why is this happening? and any solution for this? Thank you in advance.
Hi SuzanneSchwester,
Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:
· Did you do changes on the computer before the show?
· What is the brand and model of the computer?
Follow the steps in the article.
You have problems after you resume Windows Vista from sleep or Hibernate computer
You can see these articles for more information:
Turn off a computer: frequently asked questions
I hope this helps. Let us know if you need more assistance.
Thank you.
-
. M2T "generic import error" after the files moved
That someone know something for winging a .m2t file that PrPro generated previously imported and edited very well, who has then squirrels after the file has been moved? (details below)
Thank you.
-------------------------------------
Recently, I moved the source (including the sidecar files) for work files off my C:\ to a backup disk, in a desperate move to take off a suddenly frigid Premiere Pro and still (C:\ drive space was extremely low). I thought I was OK to do it, since I had exported all my final video files and confirmed that they looked fine (amount). However, some of them were .m2t files, which still had no audio its chronology. Much scrounging to find out later, I decided to try to re - export these files from their source PrPro projects, this time without audio multiplexing. I expected to just move the source files in their new location. It worked for most of the files, but not the .m2t file.
Here are my patches attempts (failed):
- Use move function PrPro manually navigate to the file and select it. (Fails. File is not displayed in the location of the project and is still missing in the timeline. "But PrPro generates no error to announce or explain the failure).
- Re-import the file in the current location. (Fails. I get "error importing generic," with zero further info.)
- Move the file (and the sidecar files) to the original location, then re - locate with PrPro. (Fails, as 1.)
- Re-import a file in the location restored (after 3). (Fails. Same as (2).
- Copy and rename then file (and sidecar files) in restored location and then freshly import this file completely-news-to-PrPro. (Fails. Same as (2).
I have not yet tried the things:
- Deleted cache. I have read horror stories here on edit work days lost to empty cache, then now that I only once the discs are printed and iso are archived.
- Convert a file using another program .m2t. Strictly speaking, I tried with (groan) Windows MovieMaker, but it will not display an image larger than 740 x 480 (Yes, settings allow larger, but only as Giants black residents.) I maybe reinstall my prior NLE (Avid Pinnacle) - should work, but may take hours to reinstall.
Solution:
I gave this fixation within PrPro and rather bought a type of video file converter. I got Video Converter Ultimate of Wondershare, which was not too expensive and works well. Now all my .m2t files are converted into file types PrPro like much better, and they import no problem in my project.
-
I have Adobe Acrobat and it is not letting my edit my pdf, she continues to redirect me to a page with a link "more" and click on who goes to a page that requires a payment of $14.99. I bought this product, the money came out of my account and I restarted and stop my computer and the same page continues to appear when I click on edit my pdf file.
When we've seen this before, it is because people buy Adobe Acrobat Pro, but in fact are not running. If you have Acrobat Reader, you get the same message.
So if download you Acrobat Pro, but not install it, then install it now.
If you have installed it, and then start it (with start menu or launch pad) and open the PDF file there.
-
Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.
Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.
Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.
You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.
-
After that Vista update of my Satellite L40 won't start
After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.
I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?
Please help me!
For me, there is only one option: disable the automatic update to Vista.
By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?
-
After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.
What I would do. I was grinding a lot and nothing has worked so far.
Stone
Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):
1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?
2 a Norton or McAfee application ALREADY installed on the computer?
3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
4. why has not been installed SP3 years?
-
After downloading Vista updates
After downloading Vista updates and install them, I get the new updates icon in the taskbar. While they inspected the history update, I see where the update was installed. What should I do to get rid of him. It comes even when I restart my computer. I have administrative rights for this computer.
Hello
Updates are you referring?
Try the steps and then check.
Step 1:
Run the fix of the article.
Reset Windows update components.
http://support.Microsoft.com/kb/971058
Step 2:
Follow the steps in the article.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
See also:
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
-
Ubuntu 12.04 and upgraded to Ubuntu 14.04 and now trying to open an MP3 audio on a Web site that used to work, now I get an error message indicating that the file is corrupted. Using the Firefox browser which is updated. What now? The file opens correctly in Documents with VLC Player.
Don't worry about this. You are today, ask questions.
Someday, you'll be the one who gives the answers.Once you are sure that the problem has disappeared, please report
your last post as solved problem.Good luck.
-
media center ehshell.exe received the error message 205 units
of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key
After you have installed the XP SP3.
How can I fix this error.
Media Center worked fine until I installed SP3.
Hello
I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.
Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.
(a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."
(b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.
(c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.
(d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.
If the problem persists, follow these steps:
You try to run the following commands to re-register all Media Center services:
(a) close Media Center
(b) click on the start menu, choose run and type cmd , and then press ENTER.
(c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:
· Regsvr32.exe atl.dl
· C:\WINDOWS\eHome\ehl Sched /unregServer
· C:\WINDOWS\eHome\ehSched/service
· C:\WINDOWS\eHome\ehRecvr /unregServer
· C:\WINDOWS\eHome\ehRecvr/service
· C:\WINDOWS\eHome\ehRec.exe /unregServer
· C:\WINDOWS\eHome\ehRec.exe/regserver
· C:\WINDOWS\eHome\ehmsas.exe /unregServer
· C:\WINDOWS\eHome\ehmsas.exe/regserver
· Restart the Media Center
Hope this helps and let us know if you need more assistance. We will be happy to help you.
-
Hi, I have problems on developing an image as a wallpaper on my laptop.
It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written.
I tried right click and do it the long way to go to appearance and personalization in the control panel in the start menu. None of these work and I wonder why it's happening.
my computer is Windows vista Home premium and is about half a year. If anyone knows how to solve the problem of it not allow me to set a background please give me suggestions.
Dan
Treat it as a corrupted user file. To fix this usehttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile. Use the new administrator account to do this. Follow the directions given and everything will be fine and your new admin account should work normally. Once you have ccnfired you can access, to all your acccess all of your programs and files, you can delete the old user obsolete and corrupt.
That's all there is to it. Now that we know, this is the profile and not the system, the solution has been set for us.
I hope this helps. Feel free to post back with any questions as you go along.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
He is the girl's computer. HPmini 210-1076NR. Windows 7 Starter 32-bit o/s. I can't the dashboard camera to work. I looked on the website of HP and you can't find a referance to this driver anywhere. Does anyone have information on this situation?
Hello
Follow this link:
If this response help click in congratulations to the tanks.
Tanks
-
I start using adobe lightroom and photoshop with trial version and today I decided to use the creative photography of Cloud (one year) and after the purchase, I received email to confirm that, but my adobe lightroom and photoshop always demo how can I solve this problem
[moved from the download, installation, commissioning creative cloud download &install]
Maybe you are looking for
-
iMessage don't work and don't say no conversation
My problem is that I can't use my iMessage more. If I open the application on my macbook pro, all I get is a gray window that says "no selected conversation." Also I can't add an account in the iMessage menu. I tried to delete the plist preference an
-
I have merged my restore partition HP with another partition I created. Data recovery files are still intact in the New Partition. I have not created a recovery media. When I tried to create the USB Flash Drive recovery using recovery HP Manager medi
-
HelloThe situation is like this: I have 10 Acer laptops with linux installed on them and 10 Windows XP home sp3.I have instaled on laptop and after that I created an image of the hard drive and installed on a computer to second and third.The problem
-
Can I use the software to encrypt my Acer C: (My Hard Drive Disk)?
I have read the BitLocker Drive encryption item and gpedit.msc but unfortunately I have Windows Starter: (but what do I use the software to encrypt and secure my hard drive (C: Acer) to prevent hackers, scammers, virus, ransomware, spam and each viru
-
Does anyone know what dll is the event for MSCamSvc messages file?
HelloI want to stop the event log harassing me on "the description for event ID 0 in source as mscamsvc is not found." Well, I know this isn't a problem as such but it annoys my OCD. Does anyone know what dll is the event message file, so I can just