After the waiting on my Satellite A210 screen is blue

Similar Questions

• After the waiting on my Satellite A200 screen is black

  I would like to ask for help.

  I have problem when I close the lid of my Satellite A200 1 - HV (PSAECE). Computer is going to hold and after I opened the hood, laptop seems to work but display is always black. Only way to make it useful is once again turn the unit off (by the power button) and turn it on.

  Sometimes, the same problem occurs when the computer starts. After loading Windows (XP) the screen goes black and I can't do anything. Sometimes at startup of Windows but the resolution is 640 x 480 and color depth is 16 or even 4 bits!

  I don't know if it's a hardware or driver problem. My graphics card is a GeForce GO 7300. I tried to find one driver other than that on the official website of Toshiba but I can't. This problem is quite annoying. Sometimes I have to try 3 or 4 times until my departure from the computer correctly.

  All attempts to help will be really appreciated.

  Hello

  Have you updated the BIOS to the version of Windows XP Home edition (5.20)?

  I found a few with similar threads describing the same question. It seems that Windows XP Home edition does not work perfect on laptops designed Vista. Now I'm really curious about it. I install WXP SP2 on my Satellite A200-1CR and test it with Eve profiles different power.

• How to identify the model number Toshiba Satellite A210

  Hello

  I have a Satellite A210, now, I would buy an extra RAM. On all the Ive visited the site, they ask for a little more information. They ask for a Satellite A210...
  I looked at the sticker on the bottom of the laptop, but that only shows the A210. My model number is PSAFGA-078019. Where can I find what is supposed to come after the 210?

  Thank you

  Hello

  All information must be posted at the bottom of the unit.
  There are a few labels including details such as the model number, serial number, etc.

  But to be honest that the Satellite A210 PSAFGA 078019 is not a European Toshiba model.
  It s possibly an Australian / New Zealand series.

  I googled for the number PSAFGA-078019 and get some information.
  It seems that the laptop is called Satellite A210/801

  However, the laptop should support the same modules as the other units A210 and compatible modules supports these specifications:
  * DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM *.

  See you soon

• I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  Please try the steps mentioned in the Adobe Photoshop Lightroom help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  You can check 6 Lightroom displays a blank blue screen with an X through it in the module development for all the photos of my reference.

• Satellite A210 - screen goes black without any reason!

  I got my satellite A210-171 for a few years and a few months ago, everything was OK.
  But our when I'm working or watching a web my screen goes black and nothing seems to work?
  The only way around this is to turn off the power switch on the laptop then restart it again.

  I then get a message saying roughly...
  Computer has not closed properly OR sound closed to protect all data, then a countdown begins to re open!

  It may be OK for a few hours or maybe a day there is no limit of time on it!
  If anyone can help I would be very grateful, but please don't use of computer jargon that I don't understand

  Thank you

  Hello

  It is really hard to tell what is causing this problem. It could be a hardware malfunction or a software problem.
  But as Auma says you should test the RAM with Memtest86. It's really very easy to use and can detect modules memory defective RAM check it!

  Another question is have you installed a different display driver or updated? I ask this question because the display drivers they are not causing Toshiba sometimes of questions.
  In any case, I would recommend updated display driver and check the site Web of Toshiba for a update.

  And before moving on to an authorized service provider reinstall you Windows using the Toshiba recovery disc. So you will get back factory settings and with these settings, your laptop should work fine.

  Good bye

• Need the original BIOS for Satellite A210 - 1AO PSAELE

  Hi all!

  long in vain looking for the original BIOS for my satellite A210-1AO PSAELE-03Q00FRU (Vista32bit preinstalled).

  Unfortunately I've updated and laptop lost the ability to disable.
  VERY noisy DWD - ROM (TS-L632H) through the BIOS (but it worked without a doubt with the original BIOS)
  It is also impossible to turn it off through the Device Manager (tried several times).

  I looked for BIOS anywhere where I could (Yes, I tried to download & support from Toshiba for Europe, USA, Canada, China, Russia - no. satellite A210 PSAELE BIOS in lists, even for the A200 PSAELE).

  Written in support of the Russia of Toshiba - no result. the point is that I don't know bios original version for my model, so I tried BIOS version 1.1, 1.4, 1.5, 1.8, 1.9, 2.0, 2.3 - no result.
  The latest idea is to physically remove the DVD-ROM, but it is the solution.

  So where can I find that BIOS? or you recoomend a truly customer friendly toshiba can support office?
  Thanks in advance!

  Hello

  The Toshiba driver page provides us with all versions of BIOS for Satellite A210/A215 (PSAEGU/PSAELU)

  Toshiba Satellite A210/A210 PSAELU US is the same series as series of Toshiba Europe Satellite A210 PSAELE

  [Versions of BIOS for Satellite A210/A215 (PSAEGU/PSAELU): http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1757694& rpn = PSAEGU & modelFilter = A215-S4697 & SelCategorie = 2756709 & selFamily = 1073768663]

  Welcome them

• The webcam on my Satellite A210 - graphic error make fail

  I just bought a laptop Toshiba Satellite A210. I have everything installed and working properly, except the built-in webcam. Webcam Viewer says "rendering failed" when you try to turn on the webcam and MSN does not recognize that I have even a webcam on or plugged into the computer.

  Am I missing something?
  Do I need to activate it somewhere?

  Thank you.

  Reboot the laptop and try to start the webcam software. You can use the webcam again?

• Problem with the series L of Satellite - black screen startup

  Hello

  These last days, I have a problem with my laptop. When I start it, nothing happens on the screen. I hear the process etc. of fans, hard drive, but there is no reaction to the screen. There is only one way to close: take out the battery and adapter.
  When I start it up after the problem, everything works fine.

  Anyone know what it is?

  Thank you

  I read about similar cases. It s really strange, but sometimes it happens
  But usually the BIOS update should contribute to

  You use the latest version of the BIOS?
  If this isn't the case, update with the correct version.

  Greeets

• Black screen after the start in HTML5 BB10 app screen

  Hi, Im having a second black screen 3 after the splash screen, is anyway to fix this?

  Thanks, astanley, I managed to work around it by allowing the second startup screen show all in charge of the first layout

• After the recovery with CD Satellite C660-1FE keyboard does NOT work

  Hello

  A month ago I bought a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and I replaced the broken HD. I did a recovery of my HD image, so I had to order the recovery disks of the product on the Toshiba site (3 disks, which drive 1 and 3 were the only required for installation).

  Now I have the problem that my laptop keyboard doesn't work. I am currently using a USB keyboard and a mouse to replace my keyboard and the touchpad of the notebook.

  The keyboard of the laptop works fine in the BIOS. Therefore, I hope that it's just a driver issue.

  I have:

  tried to find and install a lot of pilots since the toshiba site, no results.
  tried to change settings in the bios (usb enabled).
  tried to fix the problem by reinstalling all of the computer repeatedly.

  The keyboard seems to work until windows loads. When the system is switched on I can press caps lock and num lock and the green lights will turn on. All this stops working once windows starts is displayed.

  Perhaps another problem in Device Manager: under the graphics card, 2 subcategories have exclamation points: it says Mobile Intel (r) 4 series express chipset family twice! I can't seem to fix these with the drivers I can find either. When I check the settings I have this message (google translate since it is in Dutch):

  + Digital signature for the drivers for this device is necessary, cannot be verified. Possible after a recent hardware or software change a file that is installed signed incorrectly or damaged, or malicious software is installed from an unknown source. (Code 52) +.

  + You must restart the computer for this change to take effect. + (obviously I've tried that too)

  Can someone give me it please help? I'm at the end of my intelligence.

  Sincerely,

  Daniel

  Hello

  Keyboard works in the BIOS, it means that the keyboard material should be ok and the connection between the keyboard and the motherboard is established.

  So, what could be bad? Keyboard driver?
  Hmm, the keyboard driver is part of the Windows operating system and is installed automatically during the installation of the OS
  I would recommend following:
  Go to Device Manager and remove the keyboard point.
  You should see something like PS/2 standard keyboard
  If you see a red x next to this unit, then it means that the keyboard is disabled.
  Usually, you should be able to activate this again (in Device Manager).
  If there is no Red Cross, so I you would recommend the deletion of this keyboard in the Manager list of devices, then reboot the laptop. Usually, the operating system should recognize the device automatically deleted and should install the driver too.

  Select this check box.

  By the way: it is possible that you received a recovery disk wrong which could explain the problems after the recovery procedure

• After one minute of no activity my screen turns blue and I have to click back as a user. I want to prevent this.

  It started a couple of weeks and the only thing I can understand, is that it must have been associated with an auto update.  If I don't move my mouse or typing something in 60 seconds, my screen turns blue and I must click on the Daisy to the same user to reopen.  I want to prevent this.  I tried to use recovery and come back a couple of weeks, but it did not help.  Can someone tell me what is happening and how to prevent this?

  Thank you

  Hello

  I see you want to remove the logon screen on the resume.

  What operating system is installed on the computer?

  You can try the following and check:

  Method 1:

  You can change the screen saver and check:

  Steps to follow:

  a. open screen saver settings by clicking the Start button, then Control Panel. In the search box, type screen saver, and then click Change screen saver.

  b. in the screen saver list, click the screen saver you want to use and then click OK.

  Reference link:

  Change your screen saver

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  Method 2:

  You can turn off the screen saver and check:

  Reference link:

  Enable or disable the screen saver

  http://Windows.Microsoft.com/en-us/Windows7/turn-your-screen-saver-on-or-off

  Method 3:

  Alternatively, you can try the following steps:

  a. go to the upper left corner of Control Panel - Power Options - need an alarm clock - value do not require a password - password
  Save the changes.

  b. right click on the desktop - Pesonalize - screensaver - uncheck on summary, logon screen.

  Do not post the State of the question.

  If you need help on Windows let us know.

• After the driver to install Satellite U205/S5044 won't start black plus-ecran

  Yesterday I installed drivers for my U205/S5044 and after restart, the screen black.
  When I press any key, I've heard say only a PEEEPPPP.

  Hi Mc

  Can you please post some more details?
  For example what driver you updated or install?

  Are you sure you used the writing and the compatible driver?

• After the installation of my Satellite L500 OS version is installed

  I installed pre my laptop Satellite L500 with Windows Home Premium 64 - bit for the first time and after installation Windows 32-bit!

  Why became 32-bit and how to put it back again to 64-bit?

  Can you please post model mobile exact?
  Did you install OS using recovery delivered DVDs or what?

  Some models of laptops are available with pre-installed 64 bit and additional 32 bit version on DVD.
  Please post the exact model name and model number so that we can check it out.

• Cannot start installation of recovery after the replacement of HDD - Satellite A10

  I have a satellite a10, I bought a new hard drive on ebay brand new in the package and it's a 40 GB with the Toshiba name thereon. I took the old 30 GB and put in the drive.

  Put in the original recovery CD, I got with the laptop and get the screen: "WEelcome to the toshiba recovery utility" etc, etc. HIT F1 ok but nothing happens,
  Any thoughts?

  Recovery at startup press 1 procedure and not F1 for installation in Standard mode.

• Black screen on computer Lenovo Yoga Pro 2 after the opening session in Windows 8 screen

  I return this laptop Lenovo Yoga Pro 2 about a month and it has Windows 8. I start the laptop and once I enter username and password, I have a black screen with the mouse pointer. Lenovo support has been useless. They asked me to run c:\windows\system\restore\rstrui.exe by using the Task Manager, but I get the file not found. When I go to the command prompt by using the Task Manager and check dir listing in the directory of restoration, it shows empty.

  Very frustrated. Can someone please help here on the Microsoft Forum?

  Thank you in advance.

  It seems to me a solution, it worked for me, so hopefully it will work for you as long as you experience the same problem.

  Because you can always go to the sign in screen, do the following:

  Click on the power icon in the lower right to open the menu,

  Hold down the SHIFT key while clicking the button of /restart/ once.

  A screen will appear after a few moments.

  Click and follow the instructions /Refresh/ and let him go during its cycle...

  all fixed!