After turning Equium A60 on screen is black

My equium A60 is turn on and the light for the power is on, but the screen is black and the start of the laptop is not.

Believe me; It's not easy to say what could be the problem on your laptop.
First of all, I recommend to remove the battery and unplug the AC adapter from the laptop. Wait several times (15-20 min) and then reconnect all the parts.
Then you could try to start the laptop.
If it won't work, I assume that there is a hardware failure. But to say what s bad a detailed test is necessary.

Tags: Toshiba

Similar Questions

  • * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

    I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

    Hi Peter,.

    1 have had any changes made on the computer before the show?

    2. which media player you use to play the video?

    3. the problem occurs on all the video clips?

    I would say as update you the video card drivers and check if the problem persists:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the problem is not resolved, please respond with more information to help you best.

    Thank you.

  • After a few minutes, the screen goes black on Windows Vista

    Title: power original economy

    I wish my screensaver runs while I'm not using my computer, but after a few minutes, the screen becomes black until I move my mouse again. How can I stop this?

    Thanks, it was just a matter of adjustment of the power to the right thing!

  • After I Log In, the screen goes black.

    After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

    original title: after I Log In, the screen goes black. Help me!!!

    Hi Kooper93,

    You can also try theclean boot to see if this is due to a program/process.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Equium A60 blue screen after updating XP Home SP2

    I have a Toshiba Equium A60-692. I have updated to XP SP2 and now get up a blue screen at startup with the message that ATI driver ati2dvg is entered in a continuous loop. The Microsoft error report says it is because of incompatible drivers, but I have the latest driver from Toshiba.

    Anyone have any ideas?

    Hi Laura,

    Did you install CD driver "Tools & Utilities" that you got with your laptop?

  • MacBook Pro 2015 turns on but the screen remains black...

    Hello

    Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

    Could someone help me please?

    Also a few minutes ago the fan has started to make noise in the macbook...

    But the screen remains black.

    Thank you

    Shaynidw

    Hi shaynidw,

    From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

    On the screens you see when you start your Mac

    Power on

    When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

    White screen

    After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

    shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

    In addition, you can try to start your computer in safe mode to see if you get different results.

    Try safe mode if your Mac does not end commissioning

    If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

    Take care.

  • Equium A60 - blue screen at startup

    Hi... problem with Equium A60. Running on Windows XP SP2, when I start the computer I see the windows xp logo and then all of a sudden it is blue screen and try to restart. What could be wrong? Any sugessions...

    Thank you

    Try to start in safe mode. To do this turn on the unit and start pressing F8 immediately, in the advanced options menu, select Safe mode. Log on as administrator. When safe mode has loaded right click on my computer-properties online-online advanced settings-online Startup Recovery & -online the system failure => to uncheck the box that says automatically restart => click OK.

    Then stop and restart normally. Now when it bluescreens, you should be able to see the complete error message. You can have a STOP error with a lot of 0s in it. Write it down. Type the STOP in the Google code or support.microsoft.com and see what happens or post it back here, chances are that in this regard, there is a knockout. unless it's a hardware problem.

  • computer does not work properly after the update, because the screen is black.

    Advice please! :-(

    After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

    The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

    My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

    Any advice would be so appreciated.

    Thank you.

    Hi Patty,.

    Welcome to the Microsoft community. I would be grateful if you can answer these questions.

    1. You have installed the latest drivers for Windows 8?
    2. What is the model number for Gateway computer?

    If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

    Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

    Method 1: To resolve this problem, update the Gateway website. video card driver

    Step 1: Check out these Microsoft items for additional reference:

    Download and install the drivers

    http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

    Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

    Download your applications and devices in Windows 8.1

    http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

    If the problem persists, proceed to the next method.

    Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

    Windows 8 starts with a blank screen after a standard or hibernation

    http://support.Microsoft.com/kb/2756559/en-us

    See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

    Hi all
    I have a laptop Toshiba Equium A60 which now extends for less than a year.
    I am running WinXp Sp2

    Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

    I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

    Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

    It works well in Safe mode and doesn't crash.

    I updated the driver but and it's always the same.

    I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

    When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

    This could be a problem with my cable?
    Help, please... Any ideas?

    Thank you for the charges,
    Shay

    Hello

    If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.

  • IM new after effect and my composition screen is black and I can't see the video. Any ideas?

    I plug just after effect cs6 and I have installed it on my laptop but my composition screen is black and I'm not able to see the video. Here are the following info on my computer. resolution 1366 x 768, 60, graphoc memeory 1792 MB referesh rate. 1 TB hard drive, 12 GB of RAM

    Thank you

    Deban Tony wrote:

    resolution 1366 x 768,.

    The requirements for the CS6 (which can be found here: system requirements:) After Effects) specify a resolution of at least 1280 x 900 display

  • Re: Equium A110-240 - screen is black

    Hello.
    I booted the computer and I hear the fan start, but 5 seconds later collapsed... But there is light on the button to start the computer, so I know it is on, but the screen is black...

    And there is no noise of peep that would indicate that the screen is broken or something. Any ideas?

    Thanks for the replies

    Hello

    If your black internal display have you tried an external monitor? The internal screen is maybe defective.

    If the external monitor shows a black screen, you should also try the following solution:
    Remove the AC adapter and battery
    Wait 1 hour
    Then reconnect both devices and try the laptop

    In the worst case there s a hardware malfunction, and you need professional assistance from an authorized service provider. Maybe your motherboard is faulty :(

  • Equium A60-181 screen is very low after reconnection of cable

    My satellite had been very slow lately and I was advised to remove the base and clean the dust fan (I'm quite a novice).

    When I replaced the screw, the screen would not work, but all the power lights were on. I reopened the base and found that a wire was disconnected and rested there. After that, the screen went very dark.

    Any ideas what it could be?

    Any help appreciated.

    Hello

    Uh, I think that it s is probably not a good idea to screw on your machine without having experience with mobile systems.

    Thus, for your problem, try to reconnect the cable but correctly. In the case of no success, it would be useful to bring your machine to a technician or at least to an authorized service partner to check your machine/connections. Maybe they can find the error.

    Welcome them

  • Equium U400 - laptop screen goes black

    Just recently, my laptop Equium U400 problems when opening upward. The light of the screen was unstable for seconds (flicker) and then the screen lost light, although we could see the office, but dark "negatively". It would take a few attempts to close and open the lid so that the computer goes into hibernation mode and then resume, to try to get the screen working well.

    The problem persists and I don't know if this is due to a software or certain conflicts from windows or it's a hardware problem.
    Any ideas?

    It is not easy to understand and not possible to give you a good solution.
    It can be the display problem, it can be FL inverter problem but troublemaker may also be the display cable.

    In my opinion, it is material on the issue and I fear you need professional help with this m.

    What happen exactly when you turn on your laptop?
    Have you noticed this problem after waking from standby/hibernation only mode?

  • Equium A60: random screen blackouts

    Hey guys & girls,

    I recently bought a P4 A60 satellite at Christmas and since then I ve had a small number of growing problems and I was wondering if anyone knows the same thing?

    It only worsened recently when windows XP home wouldn t start so I had to use Norton ghost to transfer my work off the laptop computer via a network of my home machine.

    After inspecting the safe mode boot log, the computer seems to keep the gel and then restart on an ati.sys driver, but before that I ve had a lot of problems with my screen so I m wondering if it can in fact be hardware related?

    symptoms: random screen blackouts (having to close the lid and reopen it to do to turn around).
    Unexpected windows failure when loading the ATI drivers to the windows startup.
    When I went to use the Toshiba Recovery DVD the screen turns off and he won t come back.

    Help, please

    Tom

    [Edited by: admin August 6 05 08:12]

    Hello Tom

    On this path, it is not easy to say why all this is happening, but after the recovery procedure, everything should be ok again. If there is no success after the recovery procedure you should contact the Service partner. The device has a valid warranty and all costs will be covered.

    I guess the recovery procedure is known to you. Honestly I n t understood exactly what you hear with the screen turning off the coast guard and he won t come back. Can you explain to me exactly what happens if you want to retrieve the unit?

  • Equium A60: Blue screen problem

    I have a series of A60 Equium (PSA667E), refurbished. There is a blue apearing screen sometimes when I start sending me an error message. I tried to update my BIOS, like the Web site noted. But a message tells me that I have no need, because its already set to level. So, I have the correct BIOS but my problem blue screen persist. What I can do...

    Hi Eduardo,

    Can you give a little more information about the error message on blue screen? These usually occur because the operating system has encountered an error serious and can not continue, but without the details of the screen, it is not possible to advise you what to do next.

    Kind regards

Maybe you are looking for

  • How can I access to my apple for facetime on MAC ID?

    "I just downloaded OS X El Capitan, and as soon as my laptop turned on again, a message came asking if I would allow" facetime: [my apple ID] "join the keychain" or something of the sort. Now, of course, I wasn't sure of what that was, so I tried to

  • HP 7520: HP 7520 loses connection wi - fi

    Printer all-in-one HP 7520 hangs after a blackout of the entire House. It does not turn off and I can not see or communicate with him on my wifi network. I read on a lot of people having this problem and proposes several solutions, I tried, without p

  • Power Manager is suspended.

    Hello There is a ThinkPad Edge 15, which I've updated the BIOS system 1.21. I installed Power Manager for him and he hung around 5 times. Then I uninstalled it, and it does not crash again. I thought that maybe the problem is with the battery firmwar

  • Photosmart B209a more: with the Scanner B209a problem...

    I've already read so many threads on the HP forum. No and then save me. I have win7 64 bit and B209a Photo Plus... My is simple: I have this pop up: "the HP imaging device is not found. Try the following steps. "etc. The steps do not work. Extended e

  • Can not get the camers to work

    original title: ca ot get the camers to work Cannot get the camera memory card to work