After Update 9.3 activation problem

Similar Questions

• Service issues cell phone iPhone, update errors and activation problems.

  So I just returned from a stay in Germany yesterday. I got home and when I got my iPhone 5 s out, my iPhone would not connect to my carrier that is EE. It shows that «in search...» ", in the upper left corner, where it should display my carrier. I have enabled updates of the carrier, but did not find anything. I also removed and re-inserted my SIM card, but when I took it out it still showed the message "Search"... ». However, I found that it was and to update the iOS, 9.3.3. Immediately I thought this would be a solution to my problem except when I tried to install this update, I had "a software update cannot be installed at this time. Try again later"message. I then deleted apps, so I had 4 GB of data in case I didn't have enough space to install it. It did not work. Then I deleted the update and re-uploaded. Still nothing. I was frustrated now then searched the Internet for fixes, but for me, those difficult sites never really work, and of course, they did not. In the end, I decided to back up my data and content and do a reset. Now I begin to set up my iPhone and get to the part where I choose a Wifi hotspot, so I chose the connection of my house which is strong and should be able to maintain a connection to the whole upward. But after I click Next, it says 'iPhone activation', but then he says: "your iPhone could not be activated because activation sever is temporarily unavailable. Try again in a few minutes. "I tried again 10 minutes later and it still does not work. All I want is a solution, because I am now left with a useless phone and I am due to go to Spain in 6 days and will not be able to ring or text anyone. Help, please!

  A difficult here. Ultimately, this looks like a problem of free Wi - Fi connection. Try restarting your router. Also coincidentally, you might have a Wi - Fi chip or the faulty antenna.

  Here's a tip for the user on the problems of Wi - Fi. Many of them does not apply in your situation but worth the drive just in case.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Citrix connectivity after updating to 2.3 problem

  Hello

  We improve our lab CPO from 2.2 to 2.3 environment and installed patch 2 and 3.

  The CPO console can be accessed directly on the server by the client, but not by a citrix connection.

  At the launch of the console through Citrix, we see two different errors at different times:

  (1) cannot access the ADAPTERS\Tidal.Automation.Sap.Custom.dll file, because it is used by another process.

  (2) Tidal.Automation.Console.exe - .NET Framework initialization error: "to run this application, you must first install one of the following versions of the .NET Framework: v4.0.30319.

  Error 1 is first seen after several attempts to start the console through Citrix, 1 error disappears and we see error 2. .NET framework: v4.0.30319 is installed on the OPC Server and the machine that we are trying to launch the CPO through Citrix application.

  East - the .NET Framework v4 must be updated on the Citrix server as well?

  Thank you
  Greg

  For

  (1) do you use SAP or ABAP connections? You must make sure you upgrade to the NCO 3.0.6 or later for use with 2.3. It's in the guide of the abap.

  As far as citrix goes, I don't know. As much as I know QA/support/dev do not test against configurations of citrix. I'll take this way of developments as well, but probably need to address a case for it.

  -shaun

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Air IPad also get stuck cant activated after update 9.3 not only the ipad 2

  My ipad air also get stuck cant activated after update 9.3 Thursday so far seems that apple did not the solution... I did also his already suggests.

  Remove all the account update DHU icloud and restore from itunes, even now downgrade to 9.2.1 but still nothing... Stress really full with this apple product.

  I also have the same problem after that latest iOS update.

  Help, please

• IPad 2 could not be activated after update ios 9.3

  I can't activated my iPad2 after updating ios 9.3

  I'm having the same problem and don't have a clue what to do.  It shows just connect my iPad to iTunes to activate it, but how do I do that if I can't go to iTunes?

• After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

  After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

  "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

  I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

  How did you get the update? via iTunes or ios

• Error activation iMessage & Facetime after updating IOS 9.3

  I use iphone 5 and you have problems for activation iMessage & Facetime after updating IOS 9.3.

  first of all the message: "an error occurred during activation.

  I tried activation use Apple ID receipt message: ' an email address verified must to connect to iMessage "& always push to open a safari browser session. It is, I have 5 e-mail address who checked everything, but this message is here yet.

  Yosiw wrote:

  I use iphone 5 and you have problems for activation iMessage & Facetime after updating IOS 9.3.

  first of all the message: "an error occurred during activation.

  I tried activation use Apple ID receipt message: ' an email address verified must to connect to iMessage "& always push to open a safari browser session. It is, I have 5 e-mail address who checked everything, but this message is here yet.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Some problems of AppStore after update of the Sierra

  Hi, after update my Mac to Sierra, there are a few problems of the AppStore:

  1. The Pages app updated to v6 and numbers to v4, Keynote, but fails to Update v5 (iWork ' 09)
  2. I've been on the program of public beta for Sierra but have now updated to the release version, but the app store is still trying to download the last Beta of Sierra. I disconnected (e) into the beta program website
  3. The AppStore download iPhoto but the app shows the icon of the incompatible (white circle with bar diagonally) in the Application folder - how to uninstall it?
  4. Is does not work available on the AppStore - the previous Terminal command Debug menu for access to this

  Thank you

  Hello

  Safe Mode boot removes the system caches that can you help an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• >: everyone is having the same problem with all the days that I have now with the update on thursda after update, it could not be started "could not find xpcom" restored Dáil

  with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
  I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
  I tried again on Saturday you have the same problem
  I'm now ignoring the update message that is very annoying because he wants me to update daily

  The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.

• Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

  Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

  Please you not to Apple here. This is a user forum.

  Try som battery tips to save:

  Battery Saving Tips for your beloved iPhone