After update of Skype, the program remains active with the icon at the bottom of the screen.

Similar Questions

• After updating Windows 10, the CPU cannot push frequency.

  After updating Windows 10, the CPU cannot push frequency. The setting of the battery's performance. Alienware 15. Really need help

  You will probably get a better response if you re - post it in the forum of the Club of Alienware

• After I Log In, the screen goes black.

  After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

  original title: after I Log In, the screen goes black. Help me!!!

  Hi Kooper93,

  You can also try theclean boot to see if this is due to a program/process.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• After a few minutes, the screen goes black on Windows Vista

  Title: power original economy

  I wish my screensaver runs while I'm not using my computer, but after a few minutes, the screen becomes black until I move my mouse again. How can I stop this?

  Thanks, it was just a matter of adjustment of the power to the right thing!

• When you watch a movie on netflix after that 10 minutes, the screen turns white

  original title: when you watch a movie on netflix after 10 minutes, the screen goes white, I can hear the movie but not see it. How to stop going empty?

  When you watch a movie on netflix after that 10 minutes, the screen becomes white, I can hear the movie but not see it. How to stop going empty?

  If I move it, it comes back. I went to personalize and click never. I know you if it's ok now!

• XP systems cannot connect to internet after updates applied over the weekend (10/29 - 10/31)

  Systems: Dell Optiplex 740

  Operating system: XP Pro, SP3.  Connected to the AD network.

  Antivirus: Symantec Endpoint Protection

  : Systems imaged with Symantec Solution Suite 2.5, running ghost console client, run office 2007, LotusNotes email client, Adobe Acrobat 9.0 pro, no odd/specialty software.

  The following hotfixes have been automatically downloaded and installed this weekend.  (The domain value autoinstall updated policy)

  KB2296011 KB2345886 KB2360937, KB2378111, KB2387149, KB982132, KB979687, KB981957, KB2279986, KB2360131, KB2418241

  System ran perfectly before the updates above being installed, applied.

  Symptoms:

  1 - log on to the network, sometimes connection takes hours (2-3) to load a new or existing profile.  This seems random, as some profiles allow an immediate connection.
  2 - the system does not stop.  Even if gone for 16 hours, it never completes the task.
  3. can access local systems within the network through a UNC path, but very very slow.  Can ping anywhere, ping also solves dns IP (google.com, yahoo.com, etc.).  Can't access a Web page than IE.  Curiously, install google chrome or any other browser allows web access - never through IE, however.
  4. can not view or change the connections of the network adapters.  Hangs and never completed the task.
  5 USB devices not already connected to the workstation before above patches do not load/install, even if they were previously on this system.  For example, a USB key that worked Friday does today.
  6 - when the screensaver activates, system is not sometimes recover.
  7 - safe mode with networking will run without problem.  IE works, connects to the web.  No hardware problem, no connectivity issues.

  Here is what I have tried, in all possible and combination orders:

  1. remove each patch listed above.
  2. remove each patch listed above AND any referenced patch.
  3 reinstall the SP3.
  4. remove each piece of software other than the operating system.
  5 - disable all services that do not work in safe mode with network.
  6. Remove and reinstall the NIC drivers.

  I am at a loss.  I have an image before the explosion, and it works perfectly until these patches are downloaded and installed.  After the restart, bam.  So, I can easily reproduce the problem.

  Does anyone have any ideas or clues as to what to try?

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If tweaking your third-party provider (i.e., Symantec Endpoint Protection) the firewall settings don't help, try the following:

  1. disable all components Symantec Endpoint AND THEN make sure that the Windows Firewall is enabled.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #5 below.

  2 Uninstall "a security update for Windows Internet Explorer 7 (or 8) (2360131)" [or "for Windows XP security update (2360131)" If IE6] via Add/Remove Programs (make sure the box show updates at the top right) and reboot.

  3 d - c #1 above.

  4. open Internet Explorer (only) to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g., KB2360131).  If an update of root certificates is listed (possibly in the category of the optional software updates on the left side of the scan results window), install it to enjoy enhanced Internet Explorer security.

  5 reboot & make sure that all in #1 above is activated again and, if necessary, disable the Windows Firewall and enable your third-party firewall.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Firefox for android 20.0 after update cannot locate the exit button. Help, please.

  No tab out to Firefox android 20.0 after update previous version it will output tab. Help, please.

  Is the solution in this thread help: where's the Quit button?

• Satellite P500 - after update BIOS on the numeric keypad does not work anymore

  I just had a Satellite P500 and am running Windows 7. I downloaded all the latest drivers and updated the system BIOS to version 1.70 (from Toshiba support website). Now, my numeric keypad of the keyboard does not work.

  The NumLock light is on and when I hit the key "6" on the pavement, he turns the power light, but the behavior of the other keys does not change that it is on or off. The '-' key to enter a '6', but none of the other keys (except "enter" does nothing.

  I removed the keyboard driver and rebooted to reinstall the keyboard driver, but has no effect. The keyboard has worked for a few days after that I flashed the bios but seems to have stopped since I started using a USB mouse. I tried to uninstall the USB mouse driver, but who have nothing do either (it was a Logitech driver).

  Anyone have any ideas? Thanks in advance

  > I did not upgrade bios 1.7
  Maybe you should try upgrading the BIOS
  As another user has suggested upgrading the BIOS 1.7 helped, even if the end user has updated the BIOS twice

• After update on Mac, every time firefox starts with: problems recovering add en tabbladen

  Whenever I run firefox on my Mac after that I installed the latest update, each session starts with a problem window indicating: Excuses voor het ongemak. Firefox problems bij het van uw add en tabbladen recovering lapses. said wordt meestal een both geopende door quality page.

  The pages I used are different pages each time. I use Firefox for about 6 years now, never had any problems...

  I tried evertything: re - install, check plugins, cool - start, close the tabs, change Aperture site preference, clear cookies and history etc. Hours and hours... but the problem is repeated and it's annoying.

  There will be a new version with bug fixes?

  Thank you! Glad to know that the solution to the problem momentarily.
  It seems to work so far!

• a lot of time, I click on Firefox, also a compatibility of add-on runs after a few moments, the screen fills with Firefox Android adds; It's embarrassing. How

  The last update of Mozilla change the way my computer starts when I click on Mozilla on the desktop. The first think what will happen is that a small window appears and tells me it is to check for the compatibility of modules. After what seems like a long time, the screen fills with a sort of Mozilla on Android and Mozilla. I must then x to access my email page. It's embarrassing. How can I fix it?

  Firefox says it's just updated each time that it starts - how to fix

  It looks like this problem.

• BlackBerry Storm 9530 to Smartphones unloacks by itself after 1 min and the screen stays on

  Hey all the... my storm unlocks by itself after I click the button locking... the screen remains so forever.  Ive had this phone for a few months and just noticed this today.  Someone knows how to do ten this?

  If it is a new problem, there is one thing to try first to see if that solves the problem - do a battery pull.  Just open the back of the phone and while the phone is turned on, remove the battery for 30 seconds, reinsert the battery and wait for the phone to reboot (~ 5 minutes).  If this does not help, the next step is to check the settings of your screen.  Go to Options > keyboard/screen.  Check that your backlight delay is set on an appropriate delay time (e.g. 30 or 45 seconds) and automatically Dim backlight is enabled.

  Hopefully that will help!

• IPhone SE lights not after an appearance at the screen frozen, faded and an attempt to hard reset.

  I just took the new smartphone Iphone SE in April 2016. It worked perfectly fine for the months that I had it until last night. I was recording playing me the guitar, when I put the phone down with the camera open for a few seconds. When I went to get the phone upwards, the screen was frozen and colors have been melted. The multicolored lines appeared as well. I tried to close the application by pressing the home button, and when I tried to press the sleep button to access the lock screen, the phone went black. When I went to press the sleep button to access the lock screen, the phone opens the same screen frozen, multicolored as before. I panicked and hard reset the phone. I turn on is no longer the phone. No apple logo appears, as well as logos 'connect to Itunes '. I tried to restore the phone to factory via Itunes, but it was without result.

  Surprisingly, when I went to restore the phone, the second time, serial number has changed from a game of numbers and letters invalid "s/o," as if Itunes is no longer permitted to detect it as an iPhone. In addition, the phone is now considered as a completely new system on Itunes, which I don't know is normal.

  I made an appointment with the Applestore for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Any comments would be greatly appreciated.

  -B.S.

  I made an appointment with the Apple store for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Your phone is not hacked and all the malware only you could catch is malicious cookies in Safari or other browsers that are removed easily by clearing their cache. I suspect you have a hardware problem, nothing more, that should solve the Apple store.

• Unlock windows box disappears after windows automatically locks the screen

  Hello

  I have a professional Windows XP Tablet from Lenovo X 200 ongoing execution machine. This problem does not occur * too * often, but enough to be annoying.

  After 15 minutes of inactiviy, windows is the standard screen saver routine by locking the desktop computer. Meanwhile, the white box that says click on Ctrl-alt-del to enter your password is visible. There is also the virtual keyboard on the screen.

  From time to time, I go back to my computer to see that white box unlock is missing! There is no way for me to go back to windows! I have literally remove the battery and restart. During this time, I lost all my unsaved data... not to mention that I keep not the most graceful way.

  This happened to someone? What in the world could be the cause?

  Thanks for the comments.

  Hi Jim_B_NJ,

  1. you have value to request password on Resume on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  For more information please visit the link below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  If you don't want to try windows to ask for the password after the recovery step turn it off below.

  (a) make a right-click on an empty area on the desktop

  (b) select Properties in the context menu that will open

  (c) click the screensaver tab

  (d) uncheck the box that says on Resume, password protect to disable.

  (e) click OK

  If you don't want the window Ctrl + Alt + Del on the logon screen, try the steps below.

  (a) click Start, click run, type Control Userpasswords2, and then press ENTER.
  Note The following dialog box may appear:
  You must be a member of the Administrators group on this computer to open user accounts. You are logged in as username, and this account is not a member of the Administrators group.
  In this condition, you must type the user name and password when you are prompted with the dialog box to type the user name and password of the administrator of the computer.

  (b) click the Advanced tab.

  (c) in the Secure logon section, click to clear the checkbox user must press Ctrl + Alt + Delete if you want to disable the CTRL + ALT + DELETE sequence

  How to enable or disable the CTRL + ALT + DELETE sequence for logging on Windows XP and Windows Vista, Windows 7

  http://support.Microsoft.com/kb/308226

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Samsung S3520 does not start after that I changed the screen he wants more F2 or F4

  F2 TO SET UP

  AND

  F4 FOR RECOVERY

  BUT F4 DOES NOTHING

  AND F2

  THIS LAPTOP HAS WINDOWS 7 SUPPORT AND WORKED PERFECTLY UNTIL MY BROKEN SCREEN

  NOW THE SCREEN IS BACK WORKING I CAN'T BOOT MY LAPTOP

  ANYONE HAS ANY IDEAS PLEASE?

  Hello

  Thank you for the update.

  I suggest you run bootrec commands and check.
  Reference:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  You can create the media to install Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.