After update to Sierra, Mac does not connect to the ReadyNAS device

I have two Macs at home - an iMac and a MacBook Pro.  I also have a ReadyNAS device, which acts as a time for both Machine.

I've updated the iMac to macOS Sierra.  The upgrade went smoothly, no error reported.  However, once it was up, I found that the iMac has questions is authenticating with the ReadyNAS via AFP (and / or he would authenticate, then delete the connection) and also not able to connect to the service of Time Machine on the ReadyNAS device.

To be sure it wasn't the ReadyNAS, I went to my MBP - it still works under OS X 10.11 and shows all the problems.  AFP shares are accessible without problem, and Time Machine works as expected.

Has nothing changed with Time Machine or AFP protocols under macOS Sierra, which could cause this?

The ReadyNAS is a ReadyNAS Pro 4, running 4.2.28. firmware, if it is useful.

Thank you very much for your help!

AFP is not used by Sierra. Try using SMB instead, if your NAS supports. Or contact the technical support of the manufacturer for assistance.

Tags: Mac OS & System Software

Similar Questions

  • Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

    Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

    The airport connects using DHCP in Bridge Mode

    The router address is 192.168.80.1

    Address IPv4 is 192.168.80.2

    DNS server is the same as the router, but grayed out

    Mac Mini IPv4 Address is 192.168.80.3

    IPv6 automatically configures

    Also updated the firmware of the airport; no change.

    ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

    Any ideas to fix?

    Thank you.

    Post edited by: en maschera

    but my my Mac mini does not connect to the internet.

    The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

    Hello

    Network preferences may be damaged.

    Open the Finder. In the Finder menu bar, click go > go to folder

    Type or copy paste the following text:

    / Library/Preferences/SystemConfiguration

    Click OK, and then move all files in the SystemConfiguration folder to the trash.

    Restart your Mac. See if that makes a difference.

    Your Mac will generate a new SystemConfiguration folder for you.

    Then open AirPort Utility located in HD > Applications > Utilitiies

    Make sure that both Internet and Extreme are green.

  • Pavilion G6 does not connect to the cellular device

    I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

    Hey RC800,.

    Thanks for the info.

    I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

    If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

    Please, try the following:

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test another iPhone connection:
    Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

    Let me know if this helps.

  • My mac does not connect to the wifi unless I turn on the iphone

    My home wifi works great though I have my wifi enabled on my iPhone. But if I have the wifi turned on on my phone, free wifi does not work half the time, unless I wake up my iPhone. I do not use a personal hotspot, or any other type of phone wifi-centric. Just a normal modem and apple airport extreme router.

    My mac is a model of iMac end 2015 running El Capitan (later). Phone is running last sof

    Any ideas how to solve this problem?

    What exactly do you mean by "does not work? What is going on?

  • Mac does not connect to the wifi and keeps crashing

    My macbook pro (end 2013) will not connect to my wifi although each device only. Now he has slow veey hone and continues on crashing, doing simple things like a PDF of scrolling. It all started a week or two after the upgrade to OSX El Capitan

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • Satelitte L50-B-1DZ: BT is paired but does not connect to the android device

    I just bought a new toshiba brand laptop with win 8.1
    Satelitte L50-B-1DZ I got bluetooth on
    And have even added and paired 3 devices to this Sucsesfully.
    Tab after assend 300Y android android phone and a samsun Music Center.

    The bluetooth connects very well with the Music Center.
    But not with the phone android or tab
    It will not just connect, I checked the phone and the tab are visible etc.

    I hear a lot of rumors of 8.1 problems
    With drivers who have improved 8 etc.
    I managed to do a check of device driver
    Manager and he said the best up to date
    Are installed.

    But I want to be playing so deep in this
    Bought a brand new laptop with windows 8.1
    Is it worth to take back to pc world a tell / show them
    The pronlem for them to market.
    Because they will be more IT his life than me.
    Does anyone else have this problem?
    Is it something android?
    I am due a new phone soon I could poss
    Get a windows a next if this will connect?

    Thanks nikki

    Hello

    Check it please my thread on the BT feature. I tested it with my phone android mobile.

    Please test the functionality of BT send some files in both sense, even if the mobile phone is crystallized in Win as not connected.

  • Computer MAC does not connect to the HP 1200 printer

    I have a Mac computer and a HP 1200 LaserJet printer.  All appropriate cables are connected, it has enough ink, and just print job stay forever in Quebec.  For an hour or so and then print.  Why the lag time?

    It is certainly strange.  Here are a few ideas:

    -Run the software update to ensure that you have everything updated.

    -Download the latest sofware to Apple 10.5 HP printer drivers HP

    -Restart your Mac and your printer.

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • Does not connect with the e-mail server after update.

    Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

    I use Thunderbird version 38.1.0.

    Thank you.

    The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

    Until the next problem...

  • Motorola Milestone does not connect to the corporate network after updating to Froyo...

    I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

    The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

    Any help? Please, I beg you.

    Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

  • Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

    I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

    The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

    C:\Users\Karen>ipconfig/all

    Windows IP configuration

    Name of the host...: KarensLaptop
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Ethernet connection to the Local network card:
     
    State of the media...: Media disconnected
    Connection - a DNS suffix is specific. :
    Description...: Realtek PCIe FE Family Controller
    Physical address: 00-26 - 9th - JJ - 83 - 9 c
    DHCP active...: Yes
    Autoconfiguration enabled... Yes

    Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

    State of the media...: Media disconnected
    Connection - a DNS suffix is specific. :
    ... Description: Microsoft ISHTHP adapter
    Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
    DHCP active...: No.
    Auto connection...: Yes

    Map of tunnel Teredo Tunneling Pseudo - Interface:

    State of the media...:...: media disconnected
    Connection - a DNS suffix is specific. :
    ... Description: Teredo Tunneling Pseudo - Interface
    Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Karen >

    (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

    I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

    Any advice would be appreciated.

    Hello:

    I'm glad that you were able to restore your internet connection.

    I'd go with the latest driver HP vice one from another source.

    The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

    My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

    Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

    Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

  • Thunderbird does not connect to the server after update to 24.4. How can I fix it?

    TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?

    Please check your anti-virus software.
    He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird.

  • Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

    Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

    You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

  • I've updated windows and now my computer does not connect to the wireless network.

    I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

    Hello
     
    You can follow below link that can help you to solve your problem:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
  • Samsung Galaxy S3 does not connect to the DELL laptop

    Hello

    I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop

    We could not see the content of Samsung Mobile in the PC. No Popup message is coming

    I tried the options below

    1. connected with different cable to the laptop, the original cable

    2. try with Samsung Kies

    Can you please help us in this regard that I wasn't sure if the drivers problem.

    We have seen the error in the mobile below.

    "Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.

    You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »

    I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop

    Thank you

    Kalyan

    Hi Kalyan,

    From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.

    Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.

    I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.

    To uninstall a program see the link below.

    Uninstall or change a program

    Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.

Maybe you are looking for

  • using several of the ADC (ad7476a) via SPI

    Hello: I BF537-EZkit and AD7476A-GERD and I set to work using the project "SPI and UART. But in my project, I have to AD7576A several... How to configure the SPI to do this? I used the "analog s in reading" loop inside the moment (who writes via UART

  • HP PAVILION a1253w: upgrade CPU

    Hi, I have HP Pavilion a1253w and Im trying to upgrade the processor... I bought the AMD Athlon 64 x 2 4800 and seems not to fit, is there an other dual core cpu that works?

  • Sound recorder XP does nothing.

    Sound recorder XP does nothing when I click on save.  No sound is recorded.  The progress bar does not move.  The saved file is zero byte. Test call Skype is very good.  Record PVR works.

  • Startup error 0701

    Original title: 0701 start error comes every time how can stop

  • How you connect the Deskjet 2050 printer to a computer? What leads?

    Seems not to be a lead included in the configuration for deskjet 2050A box, only a prinbter-food, not a USB port to sync with the laptop, what lead would need to buy? Please help x