After updating, my iphone blocked from Iphoto, itunes

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• After updating to the latest version of Itunes, it works really slow, takes more than a minute to recognize my Iphone and will not correctly backup my Iphone

  IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17

  After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed

  Running on a 64-bit Windows 8.1 Dell computer.

  ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.

  I rebooted the machine. Remove the locked file. All have failed to solve the problem

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.

  TT2

• After updating my iPhone IOS 9.2 5 my Safari no longer works

  I recently updated my iPhone IOS version 9.2 5 and I got the white screen of death. After a reset, the white screen was gone, but when I tried to use Safari, I noticed that it had completely stopped working. If I touch the Safari icon, it opens and stops immediately. I can't access same Safari in 'Settings' (I touch the word Safari and settings completely closes.) Can someone help me? I have a lot of favorites that I don't want to lose and since Safari is the browser by default, all links automatically go so I can't open them.

  Hello PhotoGirl64,

  I understand that you are having problems with Safari crashing on you when you try to access, it forms the app and even from settings. We'll see what we can do to make it work again.

  The first thing I would try requires each app to close. Double rooms, press the Home button to display the recently used applications and drag on them. Once they are closed, try opening the application again to test.

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  If this does not work, I would look to reset your iPhone settings. This will not delete the personal data, but it does not all settings to their initial default values. Once this is done, try opening the application again to see if it remains open.

  Reset iPhone
  http://help.Apple.com/iPhone/9/#/iph7a2a9399b

  Let me know if it helps

  Take care

• After updating my IPhone 5 c is to say that I used a different ID to activate when I bought it new from T-Mobile

  I bought my Iphone 5 c of T-Mobile, 5 years ago and have used this for all apple ID. Now, my iphone is saying another id has been used to activate when I know that was not the case since I have an id and bought my new iphone. Is there something I can do?

  Your phone will appear under find it my list of iPhone device?

• After updating my iPhone to ios 9.3 iPhone touch does not

  HI guys! I'm too frustrated by the question. I'm updating my iOS to 9.3 (Build 13E233) on my 6-64 GB iPhone (model A-1586) and now I can't even use 10% of my phone. My touch screen works not even taping 100 times but if I press the lock and unlock my phone, my touch screen works very well for a few seconds then freezes while on the other hand all other keys work well while the touch is blocked (for example, Home, Power, Volume buttons) and I know my phone is not stuck but only touch does not. I'm too worried because I can't use my phone even for one moment what to do any help? Any help will be appreciated sorry for my bad English. Following that I

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• iPod sync after updating to the latest version of itunes

  After you have installed the latest version of itunes, my ipod will not sync.

  If it displays in iTunes? If this is not the case, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• I restored my iPhone 6 from an itunes backup, but my group chat contacts are changed

  So I backed up my iphone on itunes because I went to the apple store to solve a problem I had. After that that they had deleted everything on my phone, I went home and tried to restore it. All went well, all my contacts were saved, my pictures, etc. so I waited so he could complete the synchronization for my laptop. While I was checking my messages, I noticed that many of the cats from group I had, had shared some of my names of friends with other people on my contact list. I also saw that other people who were in the GM had their photo ID, but instead of their name, their phone numbers were posted. I rebooted my phone and hope so that it can be corrected, but it didn't, I also tried to add the people who did not appear in the newsgroup, but I have added to them, the person that they have been replaced by a show! If anyone can help me on how to solve this problem, it would be highly appreciated!

  Hello, arsmars!

  Thank you for using communities of Apple Support. Looks like your Contacts are not being very cooperative since you have restored your iPhone iOS 10 6. I know that I have not memorized a phone number in ages and would need this support as soon as possible. I'll be happy to help you.

  It seems that you use iCloud to synchronize contacts between devices. On your iPhone, go to settings > iCloud. Disable the Contacts, wait 5 seconds, then turn it back on and check your Messages and Contacts.  I have a link below if you are still having problems:

  Get help using iCloud Contacts, calendars, or reminders

  I wish you a great weekend!

• App store disappeared after update on iphone and ipad?

  APp store disappeared with the update will not download new app?

  Hello

  Go down home page ID apple itunes page delete and then add again

  You have a request of debt to work on your apple account?

  See you soon

  Brian

• Satellite L50 - C slower RAM after update 1.40 BIOS (from 1600 to 1333)

  Help I've just updated the bios of my laptop of version 1.20 to 1.40 from 'Toshiba Service Station'

  now my RAM runs at 1333 Mhz instead of 1600 Mhz

  I also checked the BIOS and there is no option to change the speed of the RAM. I have attached the screenshot below.
  Any fix for that?

  My laptop is L50-C1957
  
  

  Now I think reflashing BIOS version 1.20.
  Since he is originally with v1.10 then I updated to v1.20, which works well, then another update came v1.40, who have now my RAM running at low speed. (All downloaded via Toshiba Service Station and installed/updated day to day by Insyde.exe[which came also with the file downloaded from Toshiba Service Station])

  is it possible to Flash the BIOS through Insyde.exe lower version? say 1.40 to 1.20

  and is anyone know the path where the "Toshiba Service Station" save downloaded updates? I don't find, been looking for hours now...

• Buttons radio in the html page generated by cgi script has stopped working after update for Firefox 4 (from 3.6.16).

  I have disabled both of the Firefox Add-ons, I use (NoScript 2.1.0.1 & Ad Block Plus 1.3.6) and restarted the machines, but that has no effect. This problem is repeated on more than one PC, running XP Pro (sp3), Vista (sp2) professional and Server 2003 (sp2), just after the upgrade to Firefox 4, so the problem is definitely related to Firefox 4.

  This could be linked to the new HTML5 rendering engine. To check for this possibility, you can temporarily disable.

  • Open Subject: config
  • In the filter box, type or paste the html5 and make a pause until the list is filtered
  • Double-click html5.parser.enable to toggle it false

  If it works after that, there may be some problems with your form layout (i.e., accepted in HTML4 but not accepted in HTML5), or you may have found a bug.

  This forum focuses on the care of the end user. You can find more help web development on the mozillaZine Web Development Council. Separate forum, separate registration. Please note the advice in the Post sticky at the top of the forum before posting.

• After update, I can no longer launch iTunes.

  I did get invited to update my iTunes to the latest version.  So I finally allowed the update to download.  Now that I've updated my iTunes, I can no longer run my iTunes software.  An error message pops up that says "iTunes is not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 193).

  I uninstalled all my Apple software and reinstalled iTunes several times and keep the same error message.

  I updated my software the latest versions as Windows to try to fix this error.

  This seems to be a common problem, I found a lot of discussions, but I have not been able to solve.

  Any help would be greatly appreciated.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Dead phone after update bios that came from HP Support Assistant

  Laptop: HP Pavilion DV6-7001TU

  OS: Windows 7 Home Premium

  HP support assistant recently recomeneded a BIOS update and I went ahead and did it. After the BIOS updaet when I press the power button / computer does not start (the power button lights up, the CD ROM is checked / departures) but nothing on the screen.

  Please help ASAP! The flash update was InsydeFlash

  Sorry for not adding that.

  I stood there, so I saw what he was doing.

  1. He pulled the battery, memory, HARD drive.
  2. Unplugged the power cord.
  3. Behind the memory card was the BIOS, he used a tool to read the number of the BIOS, which he used then to find a former chip (this part is chosen).
  4. He pulled out a very small part of the chip old (was the thickness of two human hairs, I think).
  5. Use a fan that blew up to + 400 degrees celcius heat and used a tweazer to put the old chip on the laptop, the curious one, he explained that he did a hard reset on the BIOS and is now flashing a new BIOS chip.
  6. After having done that, he threw the old chip out, left the laptop cool (he threw the chip he found in step 4, the laptop has the same BIOS chip it had originally.)
  7. After that he used gasoline and clean connectors of memory, wifi connectors, the connectors to drive HARD, the BIOS and reset the time system by removing and then pluging in the system battery.
  8. Put the battery back in and booted the computer and vola! everything has started to work as usual, except that I had to re - configure some settings in the BIOS (for my taste) and correct the time system.

  I hope this helps.

• compatibility issue after updating to the latest version of iTunes

  I have windows 7, 64 bit and have had iTunes top for more than a year.  I've just updated to the latest version and now I can't access it.  It is said that there is a compatibility issue.

  I would like to uninstall iTunes, reboot your computer.

  Reinstall again. If you went on an older version, which might be the cause.

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

• After update today no response from the computer after restart on June 6, 2009

  Hello. I just, I was wondering if someone who has updated XP today is having the same problems. I have updated the automatic updater and restarted as requested. The box came but no response no matter what, as if the hd was fried. All my fans turn on but nothing on the screen my DVD players don't openand even as the lights of the habit of my keyboard lights still. Any idea would be useful.

  Try unplugging al computer, power, cable make sure ther is not a CD or a DVD inserted and try again.
  If you get nothing on the screen is it possible that you're computer has hardware problems.
  Simply plug the necessary input devices and the power to run the diagnostic tests. (mouse, keyboard, scree)
  I wouuld also suggest to perform a complete diagnosis of a bootable CD.
  Your computer has an integrated video card? If you have an external disconnect and add plug the monitor cable onboard video card.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think