After updating Windows 10, the CPU cannot push frequency.

Similar Questions

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• After updating windows 7 Edition family premium my phone regularly crashes when you try to access the folder

  After updating windows 7 Edition family premium my phone breaks down regularly when you try to access the folder - I installed several updates, correct its and also removed countless system software - can someone help please!  It normally occurs when you access my folder music or documents, even if they are empty! I'm using an asus laptop

  There is no free or paid for the software will fix PC problems

  'used cmd & scan' could mean allmost anything.

  Apparently, you have a portable computer, you do not have scource drivers for a laptop computer via windows update (unless this portable machine said) but this laptop manufacturers support site, then visit this site of support of decision makers and reinstall all the drivers available.

• After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  Hello

  Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  Let us know if this helps!

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• After I send attachments, the recipient cannot open the document

  original title: documents

  Hi, am having problems after I send attachments, the recipient cannot open the document?

  That helps me, but not the recipient. We can only look at a Word, (file .doc) document, if they have the word or Word Viewer installed.

  There are many people who don't use MS Word, but almost everyone has a PDF reader. This tool allows to convert the resume in PDF and who should make it readable to the person you send him. I can't imagine a company that accepts mail resumes would not have a PDF such as Foxit or installed Adobe Reader.

  Online Doc To PDF Converter
  http://www.Doc2PDF.NET/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Cannot download updates Windows, get the error number: 0 x 80240036

  Had to install the new hard drive and then reinstalled in new PC software through CD obtained from DELL when the machine was first purchased, which includes Windows XP Home Edition.  PC is a Dell Dimension e 310.  Since the upgrade, I could not install Windows updates, get the message that lies beneath.  Using Vipre anti-virus only software.  Please help someone, I tried so many remedies, always with no success.  Thanks in advance.

  [Error number: 0 x 80240036] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 3

  You can read the article.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  See also:

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

• After update Windows 7, have to reinstall firefox 26, session restore button is available but does not work even if the sessionstore file is there

  I am running Firefox on Windows 7 26. Last Windows necessary to make some updates to safety, the night I closed Firefox I normally do it, use the tab out and let windows to go forward with its updates. This morning I found that Firefox has been removed. I tried to find out that my last night sessionstore.js file still exists and it does. When Firefox came all my tabs have disappeared, also my favorites, modules, etc. I clicked on "restore previous session", but nothing happens. I have a file of last night bookmarks in the bookmarks folder, and the file sessionstore.js is dated last night when I closed Firefox in a normal manner. I'm puzzled. Firefox didn't fail, I closed it as I always do before that I have authorized Microsoft Windows Update and restart. Who am I lack/hurt? I leave this open session so that I can continue to have access to this file sessionstore, as I have it copied in a folder that I use for this kind of disaster. This windows necessary also deleted my MailWasher Pro program update, changed how the Windows Explorer and more 'fun '. Thank you, Microsoft. It is barely possible that I can recreate my tabs and it would be extremely aggravating, but I have no way to re-create all my favorites. I need help.

  Hello
  If you have not closed since the last time that you can type in "subject: sessionrestore ' on the page and there should be a list of tabs from last time. If this consistantly come please see the history on open gint settin settingand

  Firefox > General Options-> view my tabs from last time
  Privacy > history

  Have these options will prevent tabs away, after the browser is closed.

  Please let me know if this does not resolve the question of restoration session being closed. We can help if it is touched by a plug-in by starting the browser in safe mode.

• HP ENVY Notebook PC m6: after updating windows 10 touchpad freeze shortly after using the keyboard

  Hello

  I've updated my laptop it has windows 8.1 to 10 and for a few days then my touchpad/pointer has been gel 4-5 seconds after I touch any key on the keyboard. for example. If I hit enter then I can't move the pointer for a few seconds... I can always use the left and right click while the pointer does not move.

  Everything worked perfectly until I upgraded to windows 10 and everything else outside the mouse freezing seems to work properly after the upgrade.

  Any help fixing this issue would be greatly appreciated, thanks!

  Hello @juibre,

  Welcome to the Forums of HP Support!

  I understand that you are having a problem with your TouchPad and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  In the meantime, please see the post by Member of the DanG82community.  In this post, you will find details of disputes with keys touch after installing Windows 10: Re: How do I solve the Post-Windows 10 questions about HP laptops Upgrade

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• ProBook 6440 b: cannot upgrade to Windows 10 - "The CPU is not supported" error message

  Hello everyone

  I have a HP ProBook 6440 b. CPU is intel core i7 M640. It is currently running Windows 7 64-bit edition. I'm trying to update to 10 Windows using Windows 10 Upgrade Wizard and it gives me error. It says "Windows 10 does not work on this PC. The CPU is not supported (NX). »

  Any help will be appreciated. Thanks in advance.

  Hello:

  I suggest that install you the upgrade from the DVD (authoring tool of your own from the link below - media Make).

  https://www.Microsoft.com/en-us/software-download/Windows10

  The DVD will bypass the hardware checks.

  Also, when you install W10 from the disk, skip verification of updates when you are prompted.

• Reference Dell 375 Bluetooth no longer works after update Windows 8, R296919, blocked by the Compatibility Assistant programs - how to fix

  Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8

  Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working.  Moreover, they could is more to be discovered to pair them up.  Device Manager showed all works very well.

  Failure of attempts to repair:
  -Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
  -Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919).  The installation was quickly blocked by the program compatibility Wizard.
  -With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work.  Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes.  Still could not pair.
  -Check in Bluetooth services and services were running.

  What worked:
  -Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
  -Enable the following:
  Remove Program Compatibility Property Page
  Turn off Application compatibility engine
  Disable the program compatibility Wizard
  -Run services.msc and stop the process of Bluetooth
  -Extract the R296919 in a directory
  - on R296919.exe and select run as administrator
  -For me, the installation failed the first time.  Then I repeated it, and it was installed fine, but required reset, which I did.
  -At this point, I was able to pair Bluetooth devices again.
  -Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.  and select Properties.  Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK.  If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
  -Reverse changes in GPEdit to not configured.
  -Reboot

  How to avoid the problem:
  Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.  on the update and select Hide update.  Microsoft has had quite a few black Tuesday lately, and this update is just another example.

  The above post started as a question.  While typing what has not worked, I developed the answer.

• Firefox runs very slowly after updating Windows 10

  Saturday, December 12, 10 Windows spent an age of update itself, with several reboots. Since then, the navigation is horribly slow with Firefox, although my internet connection is always very well (fast my Smartphone using Microsoft Edge). I have two PCs, and both seem to have been affected in the same way. Using the Task Manager, I see that Firefox uses a lot of CPU most of the time - often more than 50%. Even typing and scrolling are very slow, not just downloading.
  I disabled all my add-ins and plug-ins, run in safe mode, rebooted and reinstalled Firefox without result. So far, I'd say that Firefox is the fastest browser. I think that Firefox updated itself 42.0 version a few days, so I have a suspect that this slowdown has occurred just after a Windows Update.

  Update: Windows update itself again today and, like magic, Firefox is again well. So problem solved.

• Update Windows on the Web does not show updates

  Using IE8 on Windows XP SP3 machine. MS pushed 14 updates of security for me this week. (I do not update automatically, so) I started installing the 12 Oct. The first 9 installed but the last 5 years has failed. They pushed once again and installed the Oct. 13. Log files show some errors, but all updates are listed in Add/Remove programs as added 13 Oct. I tried to go towww.update.microsoft.com which lists my updates installed and scanned for needed updates. All I get is a page asking me orders to go to the start menu, updates of windows of my office instead of typing the url. Other information: between the two dates of update I told my machine to hide a particular update me. (Other threads think it's a problem). I recently spent software AV of BitDefender to ESET (Sept. 17).  So I do not know if this problem is called Windows Update fails to load, but of course, it will fail to load at the appropriate location, resting place.

  I have the answer! I found this answer (google) of someone who had a pc the windows update web site thought was a pimp. My problem is that web site update thought I had VISTA. So I deleted the key from registry HKEY_Local_Machine/software/microsoft/windows/current value/internet settings/5.0/USER Agent. (If the value contains a BONE which is incorrect, of course.) In my case, the value says windows NT 6.0, which is VISTA, not XP SP3. You will also need to do the same thing if your HKEY_current_user (by the same path) is incorrect (which was ok for me). After the backup of the key, and then delete it, then reboot, windows built the correct registry value and I'm back in business!

• After updating Windows, causing KB981957 XP BSOD, C000021a Service Control Manager error at startup in safe and normal mode.

  After you apply this update, the system starts more (secure or normal) and gives the BSOD error above.  Manual removal of the patch Recovery Console fix the BSOD using batch spuninst.txt in the patch folder.  The affected system is an AMD Athlon 2400 + with 2 GB of RAM and XP SP3.  All other updates installs successfully.  I scanned viruses with Avast, Dr Web CureIt, ComboFix, Malwarebytes and TDSSKiller.  The system seems to work fine without the update.

  It seems to be a problem with the Win32k.sys file in the patch, but I ran out of utilities to solve this problem.

  Hello

  The solution is to report the problem, so the update can be set to not to do so. Microsoft
  may already be a fix, or work on it, or it could be a new problem. He
  There's even a phone number to make it easier.

  Certainly keep good backups that there could be an underlying hard disk or hardware
  issue.

  ========================================================

  Here is the solution for the coooo21A except use it when you can just get the fixed update
  is not the method I want to use.

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the WindowsAdvanced Options menu that results, select thelast known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

  I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

  It may be possible that the upgrade to Windows 10 gets no success.

  I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

  Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

  Part links can be resolved. By using the links to third party is at your own risk.

  You can also check:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.